[PATCH] Revert "riscv: dts: allwinner: d1: Add CAN controller nodes"
Marc Kleine-Budde
mkl at pengutronix.de
Mon Aug 7 00:28:50 PDT 2023
It turned out the dtsi changes were not quite ready, revert them for
now.
This reverts commit 6ea1ad888f5900953a21853e709fa499fdfcb317.
Link: https://lore.kernel.org/all/2690764.mvXUDI8C0e@jernej-laptop
Suggested-by: Jernej Škrabec <jernej.skrabec at gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl at pengutronix.de>
---
arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi | 30 -----------------------
1 file changed, 30 deletions(-)
diff --git a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
index 4086c0cc0f9d..1bb1e5cae602 100644
--- a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
+++ b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
@@ -131,18 +131,6 @@ uart3_pb_pins: uart3-pb-pins {
pins = "PB6", "PB7";
function = "uart3";
};
-
- /omit-if-no-ref/
- can0_pins: can0-pins {
- pins = "PB2", "PB3";
- function = "can0";
- };
-
- /omit-if-no-ref/
- can1_pins: can1-pins {
- pins = "PB4", "PB5";
- function = "can1";
- };
};
ccu: clock-controller at 2001000 {
@@ -891,23 +879,5 @@ rtc: rtc at 7090000 {
clock-names = "bus", "hosc", "ahb";
#clock-cells = <1>;
};
-
- can0: can at 2504000 {
- compatible = "allwinner,sun20i-d1-can";
- reg = <0x02504000 0x400>;
- interrupts = <SOC_PERIPHERAL_IRQ(21) IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_CAN0>;
- resets = <&ccu RST_BUS_CAN0>;
- status = "disabled";
- };
-
- can1: can at 2504400 {
- compatible = "allwinner,sun20i-d1-can";
- reg = <0x02504400 0x400>;
- interrupts = <SOC_PERIPHERAL_IRQ(22) IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_CAN1>;
- resets = <&ccu RST_BUS_CAN1>;
- status = "disabled";
- };
};
};
---
base-commit: c35e927cbe09d38b2d72183bb215901183927c68
change-id: 20230807-riscv-allwinner-d1-revert-can-controller-nodes-65f62e04619c
Best regards,
--
Marc Kleine-Budde <mkl at pengutronix.de>
More information about the linux-riscv
mailing list