[PATCH RFC v2 2/4] riscv: dts: thead: Add TH1520 mmc controller and sdhci clock

Drew Fustini dfustini at baylibre.com
Fri Aug 4 20:14:46 PDT 2023


Add nodes for the SDHCI fixed clock and the first mmc controller which
is typically connected to the eMMC device.

Signed-off-by: Drew Fustini <dfustini at baylibre.com>
---
 arch/riscv/boot/dts/thead/th1520.dtsi | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/arch/riscv/boot/dts/thead/th1520.dtsi b/arch/riscv/boot/dts/thead/th1520.dtsi
index 56a73134b49e..b33bfb04c955 100644
--- a/arch/riscv/boot/dts/thead/th1520.dtsi
+++ b/arch/riscv/boot/dts/thead/th1520.dtsi
@@ -134,6 +134,13 @@ uart_sclk: uart-sclk-clock {
 		#clock-cells = <0>;
 	};
 
+	sdhci_clk: sdhci-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <198000000>;
+		clock-output-names = "sdhci_clk";
+		#clock-cells = <0>;
+	};
+
 	soc {
 		compatible = "simple-bus";
 		interrupt-parent = <&plic>;
@@ -291,6 +298,16 @@ dmac0: dma-controller at ffefc00000 {
 			status = "disabled";
 		};
 
+		mmc0: mmc at ffe7080000 {
+			compatible = "thead,th1520-dwcmshc";
+			reg = <0xff 0xe7080000 0x0 0x10000
+			       0xff 0xef014060 0x0 0x4>;
+			interrupts = <62 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "sdhciirq";
+			clocks = <&sdhci_clk>;
+			clock-names = "core";
+		};
+
 		timer0: timer at ffefc32000 {
 			compatible = "snps,dw-apb-timer";
 			reg = <0xff 0xefc32000 0x0 0x14>;

-- 
2.34.1




More information about the linux-riscv mailing list