[PATCH v5 6/7] usb: cdns3: Add StarFive JH7110 USB driver

Roger Quadros rogerq at kernel.org
Mon Apr 24 06:41:58 PDT 2023


Hi,

On 20/04/2023 14:00, Minda Chen wrote:
> Adds Specific Glue layer to support USB peripherals on
> StarFive JH7110 SoC.
> There is a Cadence USB3 core for JH7110 SoCs, the cdns
> core is the child of this USB wrapper module device.
> 
> Signed-off-by: Minda Chen <minda.chen at starfivetech.com>
> ---
>  MAINTAINERS                        |   6 +
>  drivers/usb/cdns3/Kconfig          |  11 +
>  drivers/usb/cdns3/Makefile         |   1 +
>  drivers/usb/cdns3/cdns3-starfive.c | 390 +++++++++++++++++++++++++++++
>  drivers/usb/cdns3/core.h           |   3 +
>  5 files changed, 411 insertions(+)
>  create mode 100644 drivers/usb/cdns3/cdns3-starfive.c
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 8e0f755ba91b..3164a5cef6ee 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -19976,6 +19976,12 @@ F:	Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml
>  F:	drivers/phy/starfive/phy-jh7110-pcie.c
>  F:	drivers/phy/starfive/phy-jh7110-usb.c
>  
> +STARFIVE JH71X0 USB DRIVERS
> +M:	Minda Chen <minda.chen at starfivetech.com>
> +S:	Maintained
> +F:	Documentation/devicetree/bindings/usb/starfive,jh7110-usb.yaml
> +F:	drivers/usb/cdns3/cdns3-starfive.c
> +
>  STATIC BRANCH/CALL
>  M:	Peter Zijlstra <peterz at infradead.org>
>  M:	Josh Poimboeuf <jpoimboe at kernel.org>
> diff --git a/drivers/usb/cdns3/Kconfig b/drivers/usb/cdns3/Kconfig
> index b98ca0a1352a..0a514b591527 100644
> --- a/drivers/usb/cdns3/Kconfig
> +++ b/drivers/usb/cdns3/Kconfig
> @@ -78,6 +78,17 @@ config USB_CDNS3_IMX
>  
>  	  For example, imx8qm and imx8qxp.
>  
> +config USB_CDNS3_STARFIVE
> +	tristate "Cadence USB3 support on StarFive SoC platforms"
> +	depends on ARCH_STARFIVE || COMPILE_TEST
> +	help
> +	  Say 'Y' or 'M' here if you are building for StarFive SoCs
> +	  platforms that contain Cadence USB3 controller core.
> +
> +	  e.g. JH7110.
> +
> +	  If you choose to build this driver as module it will
> +	  be dynamically linked and module will be called cdns3-starfive.ko
>  endif
>  
>  if USB_CDNS_SUPPORT
> diff --git a/drivers/usb/cdns3/Makefile b/drivers/usb/cdns3/Makefile
> index 61edb2f89276..48dfae75b5aa 100644
> --- a/drivers/usb/cdns3/Makefile
> +++ b/drivers/usb/cdns3/Makefile
> @@ -24,6 +24,7 @@ endif
>  obj-$(CONFIG_USB_CDNS3_PCI_WRAP)		+= cdns3-pci-wrap.o
>  obj-$(CONFIG_USB_CDNS3_TI)			+= cdns3-ti.o
>  obj-$(CONFIG_USB_CDNS3_IMX)			+= cdns3-imx.o
> +obj-$(CONFIG_USB_CDNS3_STARFIVE)		+= cdns3-starfive.o
>  
>  cdnsp-udc-pci-y					:= cdnsp-pci.o
>  
> diff --git a/drivers/usb/cdns3/cdns3-starfive.c b/drivers/usb/cdns3/cdns3-starfive.c
> new file mode 100644
> index 000000000000..afe1c6652660
> --- /dev/null
> +++ b/drivers/usb/cdns3/cdns3-starfive.c
> @@ -0,0 +1,390 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/**
> + * cdns3-starfive.c - StarFive specific Glue layer for Cadence USB Controller
> + *
> + * Copyright (C) 2023 StarFive Technology Co., Ltd.
> + *
> + * Author:	Yanhong Wang <yanhong.wang at starfivetech.com>
> + * Author:	Mason Huo <mason.huo at starfivetech.com>
> + * Author:	Minda Chen <minda.chen at starfivetech.com>
> + */
> +
> +#include <linux/bits.h>
> +#include <linux/clk.h>
> +#include <linux/module.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/kernel.h>
> +#include <linux/platform_device.h>
> +#include <linux/io.h>
> +#include <linux/of_platform.h>
> +#include <linux/regmap.h>
> +#include <linux/reset.h>
> +#include <linux/usb/otg.h>
> +#include "core.h"
> +
> +#define USB_STRAP_HOST			BIT(17)
> +#define USB_STRAP_DEVICE		BIT(18)
> +#define USB_STRAP_MASK			GENMASK(18, 16)
> +
> +#define USB_SUSPENDM_HOST		BIT(19)
> +#define USB_SUSPENDM_MASK		BIT(19)
> +#define CDNS_IRQ_WAKEUP_INDEX		3
> +
> +struct cdns_starfive {
> +	struct device *dev;
> +	struct phy *usb2_phy;
> +	struct phy *usb3_phy;
> +	struct regmap *stg_syscon;
> +	struct reset_control *resets;
> +	struct clk_bulk_data *clks;
> +	int num_clks;
> +	enum phy_mode phy_mode;
> +	u32 stg_usb_mode;
> +};
> +
> +static int set_phy_power_on(struct cdns_starfive *data)
> +{
> +	int ret;
> +
> +	ret = phy_power_on(data->usb2_phy);
> +	if (ret)
> +		return ret;
> +
> +	ret = phy_power_on(data->usb3_phy);
> +	if (ret)
> +		phy_power_off(data->usb2_phy);
> +
> +	return ret;
> +}
> +
> +static void cdns_mode_init(struct platform_device *pdev,
> +			   struct cdns_starfive *data)
> +{
> +	enum usb_dr_mode mode;
> +
> +	mode = usb_get_dr_mode(&pdev->dev);
> +
> +	switch (mode) {
> +	case USB_DR_MODE_HOST:
> +		regmap_update_bits(data->stg_syscon,
> +				   data->stg_usb_mode,
> +				   USB_STRAP_MASK,
> +				   USB_STRAP_HOST);
> +		regmap_update_bits(data->stg_syscon,
> +				   data->stg_usb_mode,
> +				   USB_SUSPENDM_MASK,
> +				   USB_SUSPENDM_HOST);
> +		data->phy_mode = PHY_MODE_USB_HOST;
> +		break;
> +
> +	case USB_DR_MODE_PERIPHERAL:
> +		regmap_update_bits(data->stg_syscon, data->stg_usb_mode,
> +				   USB_STRAP_MASK, USB_STRAP_DEVICE);
> +		regmap_update_bits(data->stg_syscon, data->stg_usb_mode,
> +				   USB_SUSPENDM_MASK, 0);
> +		data->phy_mode = PHY_MODE_USB_DEVICE;
> +		break;
> +
> +	case USB_DR_MODE_OTG:
> +		data->phy_mode = PHY_MODE_USB_OTG;
> +	default:
> +		break;
> +	}
> +}
> +
> +static int cdns_clk_rst_init(struct cdns_starfive *data)
> +{
> +	int ret;
> +
> +	ret = clk_bulk_prepare_enable(data->num_clks, data->clks);
> +	if (ret)
> +		return dev_err_probe(data->dev, ret,
> +				     "failed to enable clocks\n");
> +
> +	ret = reset_control_deassert(data->resets);
> +	if (ret) {
> +		dev_err(data->dev, "failed to reset clocks\n");
> +		goto err_clk_init;
> +	}
> +
> +	return ret;
> +
> +err_clk_init:
> +	clk_bulk_disable_unprepare(data->num_clks, data->clks);
> +	return ret;
> +}
> +
> +static void cdns_clk_rst_deinit(struct cdns_starfive *data)
> +{
> +	reset_control_assert(data->resets);
> +	clk_bulk_disable_unprepare(data->num_clks, data->clks);
> +}
> +
> +static int cdns_starfive_phy_init(struct cdns_starfive *data)
> +{
> +	int ret;
> +
> +	ret = phy_init(data->usb2_phy);
> +	if (ret)
> +		return ret;
> +
> +	ret = phy_init(data->usb3_phy);
> +	if (ret)
> +		goto err_phy3_init;
> +
> +	phy_set_mode(data->usb2_phy, data->phy_mode);
> +	phy_set_mode(data->usb3_phy, data->phy_mode);
> +
> +	ret = set_phy_power_on(data);
> +	if (ret)
> +		goto err_phy_power_on;
> +
> +	return 0;
> +
> +err_phy_power_on:
> +	phy_exit(data->usb3_phy);
> +err_phy3_init:
> +	phy_exit(data->usb2_phy);
> +	return ret;
> +}
> +
> +static void cdns_starfive_phy_deinit(struct cdns_starfive *data)
> +{
> +	phy_power_off(data->usb3_phy);
> +	phy_power_off(data->usb2_phy);
> +	phy_exit(data->usb3_phy);
> +	phy_exit(data->usb2_phy);
> +}
> +
> +static int cdns_starfive_platform_device_add(struct platform_device *pdev,
> +					     struct cdns_starfive *data)
> +{
> +	struct platform_device *cdns3;
> +	struct resource	cdns_res[CDNS_RESOURCES_NUM], *res;
> +	struct device *dev = &pdev->dev;
> +	const char *reg_name[CDNS_IOMEM_RESOURCES_NUM] = {"otg", "xhci", "dev"};
> +	const char *irq_name[CDNS_IRQ_RESOURCES_NUM] = {"host", "peripheral", "otg", "wakeup"};
> +	int i, ret, res_idx = 0;
> +
> +	cdns3 = platform_device_alloc("cdns-usb3", PLATFORM_DEVID_AUTO);
> +	if (!cdns3)
> +		return dev_err_probe(dev, -ENOMEM,
> +				     "couldn't alloc cdns3 usb device\n");
> +
> +	cdns3->dev.parent = dev;
> +	memset(cdns_res, 0, sizeof(cdns_res));
> +
> +	for (i = 0; i < CDNS_IOMEM_RESOURCES_NUM; i++) {
> +		res = platform_get_resource_byname(pdev, IORESOURCE_MEM, reg_name[i]);
> +		if (!res) {
> +			ret = dev_err_probe(dev,
> +					    -ENXIO,
> +					    "couldn't get %s reg resource\n",
> +					    reg_name[i]);
> +			goto free_memory;
> +		}
> +		cdns_res[res_idx] = *res;
> +		res_idx++;
> +	}
> +
> +	for (i = 0; i < CDNS_IRQ_RESOURCES_NUM; i++) {
> +		if (i == CDNS_IRQ_WAKEUP_INDEX) {
> +			ret = platform_get_irq_byname_optional(pdev, irq_name[i]);
> +			if (ret < 0)
> +				continue;
> +		} else {
> +			ret = platform_get_irq_byname(pdev, irq_name[i]);
> +			if (ret < 0) {
> +				dev_err(dev, "couldn't get %s irq\n", irq_name[i]);
> +				goto free_memory;
> +			}
> +		}
> +		cdns_res[res_idx].start = ret;
> +		cdns_res[res_idx].end = ret;
> +		cdns_res[res_idx].flags = IORESOURCE_IRQ;
> +		cdns_res[res_idx].name = irq_name[i];
> +		res_idx++;
> +	}
> +
> +	ret = platform_device_add_resources(cdns3, cdns_res, res_idx);
> +	if (ret) {
> +		dev_err(dev, "couldn't add res to cdns3 device\n");
> +		goto free_memory;
> +	}
> +
> +	ret = platform_device_add(cdns3);
> +	if (ret) {
> +		dev_err(dev, "failed to register cdns3 device\n");
> +		goto free_memory;
> +	}
> +
> +	return ret;
> +free_memory:
> +	platform_device_put(cdns3);
> +	return ret;
> +}
> +
> +static int cdns_starfive_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct cdns_starfive *data;
> +	unsigned int args;
> +	int ret;
> +
> +	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
> +	if (!data)
> +		return -ENOMEM;
> +
> +	platform_set_drvdata(pdev, data);

This could be done as last step when you are sure probe won't fail.

> +
> +	data->dev = dev;
> +
> +	data->stg_syscon =
> +		syscon_regmap_lookup_by_phandle_args(pdev->dev.of_node,
> +						     "starfive,stg-syscon", 1, &args);
> +
> +	if (IS_ERR(data->stg_syscon))
> +		return dev_err_probe(dev, PTR_ERR(data->stg_syscon),
> +				     "Failed to parse starfive,stg-syscon\n");
> +
> +	data->stg_usb_mode = args;
> +
> +	data->num_clks = devm_clk_bulk_get_all(data->dev, &data->clks);
> +	if (data->num_clks < 0)
> +		return dev_err_probe(data->dev, -ENODEV,
> +				     "Failed to get clocks\n");
> +
> +	data->resets = devm_reset_control_array_get_exclusive(data->dev);
> +	if (IS_ERR(data->resets))
> +		return dev_err_probe(data->dev, PTR_ERR(data->resets),
> +				     "Failed to get resets");
> +
> +	data->usb2_phy = devm_phy_optional_get(dev, "usb2");
> +	if (IS_ERR(data->usb2_phy))
> +		return dev_err_probe(dev, PTR_ERR(data->usb2_phy),
> +				    "Failed to parse usb2 PHY\n");
> +
> +	data->usb3_phy = devm_phy_optional_get(dev, "usb3");
> +	if (IS_ERR(data->usb3_phy))
> +		return dev_err_probe(dev, PTR_ERR(data->usb3_phy),
> +				    "Failed to parse usb3 PHY\n");
> +
> +	cdns_mode_init(pdev, data);
> +
> +	ret = cdns_clk_rst_init(data);
> +	if (ret)
> +		return ret;
> +
> +	ret = cdns_starfive_phy_init(data);
> +	if (ret) {
> +		dev_err(dev, "Failed to init PHY\n");
> +		goto err_clk_init;
> +	}
> +
> +	ret = cdns_starfive_platform_device_add(pdev, data);
> +	if (ret) {
> +		dev_err(dev, "Failed to create children\n");
> +		goto err_phy_init;
> +	}
> +
> +	device_set_wakeup_capable(dev, true);
> +	pm_runtime_set_active(dev);
> +	pm_runtime_enable(dev);
> +
> +	dev_info(dev, "usb mode %d probe success\n", data->phy_mode);

Not required.

> +
> +	return 0;
> +
> +err_phy_init:
> +	cdns_starfive_phy_deinit(data);
> +err_clk_init:
> +	cdns_clk_rst_deinit(data);
> +	return ret;
> +}
> +
> +static int cdns_starfive_remove_core(struct device *dev, void *c)
> +{
> +	struct platform_device *pdev = to_platform_device(dev);
> +
> +	platform_device_unregister(pdev);
> +
> +	return 0;
> +}
> +
> +static int cdns_starfive_remove(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct cdns_starfive *data = dev_get_drvdata(dev);
> +
> +	pm_runtime_get_sync(dev);
> +	device_for_each_child(dev, NULL, cdns_starfive_remove_core);
> +
> +	cdns_starfive_phy_deinit(data);
> +	cdns_clk_rst_deinit(data);

both of these will happen on pm_runtime_put() no?

> +	pm_runtime_disable(dev);
> +	pm_runtime_put_noidle(dev);
> +	platform_set_drvdata(pdev, NULL);
> +
> +	return 0;
> +}
> +
> +#ifdef CONFIG_PM
> +static int cdns_starfive_resume(struct device *dev)
> +{
> +	struct cdns_starfive *data = dev_get_drvdata(dev);
> +	int ret;
> +
> +	ret = clk_bulk_prepare_enable(data->num_clks, data->clks);
> +	if (ret)
> +		return ret;
> +
> +	ret = reset_control_deassert(data->resets);
> +	if (ret) {
> +		clk_bulk_disable_unprepare(data->num_clks, data->clks);
> +		return ret;
> +	}

how about just calling cdns_clk_rst_init() instead?

> +
> +	ret = cdns_starfive_phy_init(data);
> +	if (ret)
> +		cdns_clk_rst_deinit(data);
> +
> +	return ret;
> +}
> +
> +static int cdns_starfive_suspend(struct device *dev)
> +{
> +	struct cdns_starfive *data = dev_get_drvdata(dev);
> +
> +	cdns_starfive_phy_deinit(data);
> +	cdns_clk_rst_deinit(data);
> +	return 0;
> +}
> +#endif
> +
> +static const struct dev_pm_ops cdns_starfive_pm_ops = {
> +	SET_RUNTIME_PM_OPS(cdns_starfive_suspend, cdns_starfive_resume, NULL)
> +	SET_SYSTEM_SLEEP_PM_OPS(cdns_starfive_suspend, cdns_starfive_resume)

So both runtime PM and System sleep use same suspend/resume functions?

> +};
> +
> +static const struct of_device_id cdns_starfive_of_match[] = {
> +	{ .compatible = "starfive,jh7110-usb", },
> +	{ /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, cdns_starfive_of_match);
> +
> +static struct platform_driver cdns_starfive_driver = {
> +	.probe		= cdns_starfive_probe,
> +	.remove		= cdns_starfive_remove,
> +	.driver		= {
> +		.name	= "cdns3-starfive",
> +		.of_match_table	= cdns_starfive_of_match,
> +		.pm	= &cdns_starfive_pm_ops,
> +	},
> +};
> +module_platform_driver(cdns_starfive_driver);
> +
> +MODULE_ALIAS("platform:cdns3-starfive");
> +MODULE_AUTHOR("YanHong Wang <yanhong.wang at starfivetech.com>");
> +MODULE_AUTHOR("Mason Huo <mason.huo at starfivetech.com>");
> +MODULE_LICENSE("GPL v2");
> +MODULE_DESCRIPTION("Cadence USB3 StarFive Glue Layer");
> diff --git a/drivers/usb/cdns3/core.h b/drivers/usb/cdns3/core.h
> index 2d332a788871..8d44ab504898 100644
> --- a/drivers/usb/cdns3/core.h
> +++ b/drivers/usb/cdns3/core.h
> @@ -38,6 +38,9 @@ struct cdns_role_driver {
>  };
>  
>  #define CDNS_XHCI_RESOURCES_NUM	2
> +#define CDNS_IOMEM_RESOURCES_NUM	3
> +#define CDNS_IRQ_RESOURCES_NUM		4
> +#define CDNS_RESOURCES_NUM	(CDNS_IOMEM_RESOURCES_NUM + CDNS_IRQ_RESOURCES_NUM)
>  
>  struct cdns3_platform_data {
>  	int (*platform_suspend)(struct device *dev,

cheers,
-roger



More information about the linux-riscv mailing list