[PATCH v4 3/3] riscv: dts: starfive: Add dphy rx node

Changhuang Liang changhuang.liang at starfivetech.com
Wed Apr 12 01:45:40 PDT 2023


Add dphy rx node for the StarFive JH7110 SoC. It is used to transfer CSI
camera data.

Signed-off-by: Changhuang Liang <changhuang.liang at starfivetech.com>
---
 arch/riscv/boot/dts/starfive/jh7110.dtsi | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
index 3179b5698329..dc51e2199ac4 100644
--- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -573,6 +573,20 @@ ispcrg: clock-controller at 19810000 {
 			power-domains = <&pwrc JH7110_PD_ISP>;
 		};
 
+		csi_phy: phy at 19820000 {
+			compatible = "starfive,jh7110-dphy-rx";
+			reg = <0x0 0x19820000 0x0 0x10000>;
+			clocks = <&ispcrg JH7110_ISPCLK_M31DPHY_CFG_IN>,
+				 <&ispcrg JH7110_ISPCLK_M31DPHY_REF_IN>,
+				 <&ispcrg JH7110_ISPCLK_M31DPHY_TX_ESC_LAN0>;
+			clock-names = "cfg", "ref", "tx";
+			resets = <&ispcrg JH7110_ISPRST_M31DPHY_HW>,
+				 <&ispcrg JH7110_ISPRST_M31DPHY_B09_AON>;
+			power-domains = <&pwrc_dphy JH7110_PD_DPHY_RX>;
+			lane_maps = /bits/ 8 <4 0 1 2 3 5>;
+			#phy-cells = <0>;
+		};
+
 		voutcrg: clock-controller at 295c0000 {
 			compatible = "starfive,jh7110-voutcrg";
 			reg = <0x0 0x295c0000 0x0 0x10000>;
-- 
2.25.1




More information about the linux-riscv mailing list