[PATCH v4 5/7] dt-bindings: usb: Add StarFive JH7110 USB Bindings YAML schemas

Krzysztof Kozlowski krzysztof.kozlowski at linaro.org
Wed Apr 12 01:32:44 PDT 2023


On 06/04/2023 03:52, Minda Chen wrote:
> StarFive JH7110 platforms USB have a wrapper module around
> the Cadence USBSS-DRD controller. Add binding information doc
> for that.

That's one of the most redundant subjects I saw. You basically used four
words for one meaning. These are not exactly synonyms, but they all are
either imprecise or meaning the same.

Subject: drop second/last, redundant "Bindings YAML schemas". The
"dt-bindings" prefix is already stating that these are bindings.



> 
> Signed-off-by: Minda Chen <minda.chen at starfivetech.com>
> Reviewed-by: Peter Chen <peter.chen at kernel.org>
> ---
>  .../bindings/usb/starfive,jh7110-usb.yaml     | 136 ++++++++++++++++++
>  1 file changed, 136 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/usb/starfive,jh7110-usb.yaml
> 
> diff --git a/Documentation/devicetree/bindings/usb/starfive,jh7110-usb.yaml b/Documentation/devicetree/bindings/usb/starfive,jh7110-usb.yaml
> new file mode 100644
> index 000000000000..c8b30b583854
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/starfive,jh7110-usb.yaml
> @@ -0,0 +1,136 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/usb/starfive,jh7110-usb.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: StarFive JH7110 wrapper module for the Cadence USBSS-DRD controller

What do you wrap here? Are you sure this is a wrapper? I think this is
just USB controller?

> +
> +maintainers:
> +  - Minda Chen <minda.chen at starfivetech.com>
> +
> +properties:
> +  compatible:
> +    const: starfive,jh7110-usb
> +
> +  reg:
> +    items:
> +      - description: OTG controller registers
> +      - description: XHCI Host controller registers
> +      - description: DEVICE controller registers
> +
> +  reg-names:
> +    items:
> +      - const: otg
> +      - const: xhci
> +      - const: dev
> +
> +  interrupts:
> +    items:
> +      - description: XHCI host controller interrupt
> +      - description: Device controller interrupt
> +      - description: OTG/DRD controller interrupt
> +
> +  interrupt-names:
> +    items:
> +      - const: host
> +      - const: peripheral
> +      - const: otg
> +
> +  clocks:
> +    items:
> +      - description: lpm clock
> +      - description: stb clock
> +      - description: apb clock
> +      - description: axi clock
> +      - description: utmi apb clock
> +
> +  clock-names:
> +    items:
> +      - const: lpm
> +      - const: stb
> +      - const: apb
> +      - const: axi
> +      - const: utmi_apb
> +
> +  resets:
> +    items:
> +      - description: PWRUP reset
> +      - description: APB clock reset
> +      - description: AXI clock reset
> +      - description: UTMI_APB clock reset
> +
> +  reset-names:
> +    items:
> +      - const: pwrup
> +      - const: apb
> +      - const: axi
> +      - const: utmi
> +
> +  starfive,stg-syscon:
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> +    items:
> +      items:

Same problem as for other patches.

> +        - description: phandle to System Register Controller stg_syscon node.
> +        - description: register offset of STG_SYSCONSAIF__SYSCFG register for USB.
> +    description:
> +      The phandle to System Register Controller syscon node and the offset
> +      of STG_SYSCONSAIF__SYSCFG register for USB.
> +


Best regards,
Krzysztof




More information about the linux-riscv mailing list