[-net-next v11 6/6] net: stmmac: starfive-dmac: Add phy interface settings

Guo Samin samin.guo at starfivetech.com
Fri Apr 7 18:24:01 PDT 2023


Re: [-net-next v11 6/6] net: stmmac: starfive-dmac: Add phy interface settings
From: Emil Renner Berthing <emil.renner.berthing at canonical.com>
to: Samin Guo <samin.guo at starfivetech.com>
data: 2023/4/8

> Hi Samin,
> 
> If you're respinning this series anyway, please use "net: stmmac:
> dwmac-starfive:" to match the filename.
>
Thanks, will fix.
 
> On Fri, 7 Apr 2023 at 13:05, Samin Guo <samin.guo at starfivetech.com> wrote:
>>
>> dwmac supports multiple modess. When working under rmii and rgmii,
>> you need to set different phy interfaces.
>>
>> According to the dwmac document, when working in rmii, it needs to be
>> set to 0x4, and rgmii needs to be set to 0x1.
>>
>> The phy interface needs to be set in syscon, the format is as follows:
>> starfive,syscon: <&syscon, offset, shift>
>>
>> Tested-by: Tommaso Merciai <tomm.merciai at gmail.com>
>> Signed-off-by: Samin Guo <samin.guo at starfivetech.com>
>> ---
>>  .../ethernet/stmicro/stmmac/dwmac-starfive.c  | 48 +++++++++++++++++++
>>  1 file changed, 48 insertions(+)
>>
>> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-starfive.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-starfive.c
>> index 4963d4008485..d6a1eddb51e8 100644
>> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-starfive.c
>> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-starfive.c
>> @@ -13,6 +13,10 @@
>>
>>  #include "stmmac_platform.h"
>>
>> +#define STARFIVE_DWMAC_PHY_INFT_RGMII  0x1
>> +#define STARFIVE_DWMAC_PHY_INFT_RMII   0x4
>> +#define STARFIVE_DWMAC_PHY_INFT_FIELD  0x7U
>> +
>>  struct starfive_dwmac {
>>         struct device *dev;
>>         struct clk *clk_tx;
>> @@ -46,6 +50,46 @@ static void starfive_dwmac_fix_mac_speed(void *priv, unsigned int speed)
>>                 dev_err(dwmac->dev, "failed to set tx rate %lu\n", rate);
>>  }
>>
>> +static int starfive_dwmac_set_mode(struct plat_stmmacenet_data *plat_dat)
>> +{
>> +       struct starfive_dwmac *dwmac = plat_dat->bsp_priv;
>> +       struct regmap *regmap;
>> +       unsigned int args[2];
>> +       unsigned int mode;
>> +       int err;
>> +
>> +       switch (plat_dat->interface) {
>> +       case PHY_INTERFACE_MODE_RMII:
>> +               mode = STARFIVE_DWMAC_PHY_INFT_RMII;
>> +               break;
>> +
>> +       case PHY_INTERFACE_MODE_RGMII:
>> +       case PHY_INTERFACE_MODE_RGMII_ID:
>> +               mode = STARFIVE_DWMAC_PHY_INFT_RGMII;
>> +               break;
>> +
>> +       default:
>> +               dev_err(dwmac->dev, "unsupported interface %d\n",
>> +                       plat_dat->interface);
>> +               return -EINVAL;
>> +       }
>> +
>> +       regmap = syscon_regmap_lookup_by_phandle_args(dwmac->dev->of_node,
>> +                                                     "starfive,syscon",
>> +                                                     2, args);
>> +       if (IS_ERR(regmap))
>> +               return dev_err_probe(dwmac->dev, PTR_ERR(regmap), "syscon regmap failed\n");
> 
> This message is a bit misleading. It's not actually that the regmap
> failed, but getting/looking up the regmap failed.
Will fix.

Best regards,
Samin
> 
>> +       /* args[0]:offset  args[1]: shift */
>> +       err = regmap_update_bits(regmap, args[0],
>> +                                STARFIVE_DWMAC_PHY_INFT_FIELD << args[1],
>> +                                mode << args[1]);
>> +       if (err)
>> +               return dev_err_probe(dwmac->dev, err, "error setting phy mode\n");
>> +
>> +       return 0;
>> +}
>> +
>>  static int starfive_dwmac_probe(struct platform_device *pdev)
>>  {
>>         struct plat_stmmacenet_data *plat_dat;
>> @@ -91,6 +135,10 @@ static int starfive_dwmac_probe(struct platform_device *pdev)
>>         plat_dat->bsp_priv = dwmac;
>>         plat_dat->dma_cfg->dche = true;
>>
>> +       err = starfive_dwmac_set_mode(plat_dat);
>> +       if (err)
>> +               return err;
>> +
>>         err = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
>>         if (err) {
>>                 stmmac_remove_config_dt(pdev, plat_dat);
>> --
>> 2.17.1
>>
>>
>> _______________________________________________
>> linux-riscv mailing list
>> linux-riscv at lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-riscv





More information about the linux-riscv mailing list