[PATCH V4 08/23] RISC-V: ACPI: Cache and retrieve the RINTC structure

Andrew Jones ajones at ventanamicro.com
Wed Apr 5 08:17:48 PDT 2023


On Tue, Apr 04, 2023 at 11:50:22PM +0530, Sunil V L wrote:
> RINTC structures in the MADT provide mapping between the hartid
> and the CPU. This is required many times even at run time like
> cpuinfo. So, instead of parsing the ACPI table every time, cache
> the RINTC structures and provide a function to get the correct
> RINTC structure for a given cpu.
> 
> Signed-off-by: Sunil V L <sunilvl at ventanamicro.com>
> Acked-by: Rafael J. Wysocki <rafael.j.wysocki at intel.com>
> ---
>  arch/riscv/include/asm/acpi.h |  2 ++
>  arch/riscv/kernel/acpi.c      | 60 +++++++++++++++++++++++++++++++++++
>  2 files changed, 62 insertions(+)
> 
> diff --git a/arch/riscv/include/asm/acpi.h b/arch/riscv/include/asm/acpi.h
> index 9be52b6ffae1..1606dce8992e 100644
> --- a/arch/riscv/include/asm/acpi.h
> +++ b/arch/riscv/include/asm/acpi.h
> @@ -59,6 +59,8 @@ static inline bool acpi_has_cpu_in_madt(void)
>  
>  static inline void arch_fix_phys_package_id(int num, u32 slot) { }
>  
> +struct acpi_madt_rintc *acpi_cpu_get_madt_rintc(int cpu);
> +u32 get_acpi_id_for_cpu(int cpu);
>  #endif /* CONFIG_ACPI */
>  
>  #endif /*_ASM_ACPI_H*/
> diff --git a/arch/riscv/kernel/acpi.c b/arch/riscv/kernel/acpi.c
> index 81d448c41714..40ab55309c70 100644
> --- a/arch/riscv/kernel/acpi.c
> +++ b/arch/riscv/kernel/acpi.c
> @@ -24,6 +24,66 @@ EXPORT_SYMBOL(acpi_disabled);
>  int acpi_pci_disabled = 1;	/* skip ACPI PCI scan and IRQ initialization */
>  EXPORT_SYMBOL(acpi_pci_disabled);
>  
> +static struct acpi_madt_rintc cpu_madt_rintc[NR_CPUS];
> +
> +static int acpi_parse_madt_rintc(union acpi_subtable_headers *header, const unsigned long end)
> +{
> +	struct acpi_madt_rintc *rintc = (struct acpi_madt_rintc *)header;
> +	int cpuid;
> +
> +	if (!(rintc->flags & ACPI_MADT_ENABLED))
> +		return 0;
> +
> +	cpuid = riscv_hartid_to_cpuid(rintc->hart_id);
> +	/*
> +	 * When CONFIG_SMP is disabled, mapping won't be created for
> +	 * all cpus.
> +	 * CPUs more than NR_CPUS, will be ignored.
> +	 */
> +	if (cpuid >= 0 && cpuid < NR_CPUS)
> +		cpu_madt_rintc[cpuid] = *rintc;
> +
> +	return 0;
> +}
> +
> +static int acpi_init_rintc_array(void)
> +{
> +	if (acpi_table_parse_madt(ACPI_MADT_TYPE_RINTC, acpi_parse_madt_rintc, 0) > 0)
> +		return 0;
> +
> +	return -ENODEV;

As Conor pointed out, the errors could be propagated from
acpi_table_parse_madt(), which could reduce this function to

 return acpi_table_parse_madt(ACPI_MADT_TYPE_RINTC, acpi_parse_madt_rintc, 0);

where the '< 0' check would be in the caller below. That sounds good to
me, but then I'd take that a step further and just drop this helper
altogether.

> +}
> +
> +/*
> + * Instead of parsing (and freeing) the ACPI table, cache
> + * the RINTC structures since they are frequently used
> + * like in  cpuinfo.
             ^ extra space

> + */
> +struct acpi_madt_rintc *acpi_cpu_get_madt_rintc(int cpu)
> +{
> +	static bool rintc_init_done;
> +
> +	if (!rintc_init_done) {
> +		if (acpi_init_rintc_array()) {
> +			pr_err("No valid RINTC entries exist\n");
> +			return NULL;
> +		}
> +
> +		rintc_init_done = true;
> +	}
> +
> +	return &cpu_madt_rintc[cpu];
> +}
> +
> +u32 get_acpi_id_for_cpu(int cpu)
> +{
> +	struct acpi_madt_rintc *rintc = acpi_cpu_get_madt_rintc(cpu);
> +
> +	BUG_ON(!rintc);
> +
> +	return rintc->uid;
> +}
> +
>  /*
>   * __acpi_map_table() will be called before paging_init(), so early_ioremap()
>   * or early_memremap() should be called here to for ACPI table mapping.
> -- 
> 2.34.1
>

Otherwise,

Reviewed-by: Andrew Jones <ajones at ventanamicro.com>

Thanks,
drew



More information about the linux-riscv mailing list