[PATCH v1 05/30] soc: sifive: l2 cache: Convert to platform driver

Ben Dooks ben.dooks at sifive.com
Thu Sep 29 10:57:33 PDT 2022


On 29/09/2022 15:32, Hal Feng wrote:
> From: Emil Renner Berthing <kernel at esmil.dk>
> 
> This converts the driver to use the builtin_platform_driver_probe macro
> to initialize the driver. This macro ends up calling device_initcall as
> was used previously, but also allocates a platform device which gives us
> access to much nicer APIs such as platform_ioremap_resource,
> platform_get_irq and dev_err_probe.

This is useful, but also there are other changes currently being sorted
out by Zong Li (cc'd into this message) which have already been reviewed
and are hopefully queued for the next kernel release.

> Signed-off-by: Emil Renner Berthing <kernel at esmil.dk>
> Signed-off-by: Hal Feng <hal.feng at linux.starfivetech.com>
> ---
>   drivers/soc/sifive/sifive_l2_cache.c | 79 ++++++++++++++--------------
>   1 file changed, 40 insertions(+), 39 deletions(-)
> 
> diff --git a/drivers/soc/sifive/sifive_l2_cache.c b/drivers/soc/sifive/sifive_l2_cache.c
> index 59640a1d0b28..010d612f7420 100644
> --- a/drivers/soc/sifive/sifive_l2_cache.c
> +++ b/drivers/soc/sifive/sifive_l2_cache.c
> @@ -7,9 +7,9 @@
>    */
>   #include <linux/debugfs.h>
>   #include <linux/interrupt.h>
> -#include <linux/of_irq.h>
> -#include <linux/of_address.h>
> -#include <linux/device.h>
> +#include <linux/io.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/platform_device.h>
>   #include <asm/cacheinfo.h>
>   #include <soc/sifive/sifive_l2_cache.h>
>   
> @@ -96,12 +96,6 @@ static void l2_config_read(void)
>   	pr_info("L2CACHE: Index of the largest way enabled: %d\n", regval);
>   }
>   
> -static const struct of_device_id sifive_l2_ids[] = {
> -	{ .compatible = "sifive,fu540-c000-ccache" },
> -	{ .compatible = "sifive,fu740-c000-ccache" },
> -	{ /* end of table */ },
> -};
> -
>   static ATOMIC_NOTIFIER_HEAD(l2_err_chain);
>   
>   int register_sifive_l2_error_notifier(struct notifier_block *nb)
> @@ -192,36 +186,29 @@ static irqreturn_t l2_int_handler(int irq, void *device)
>   	return IRQ_HANDLED;
>   }
>   
> -static int __init sifive_l2_init(void)
> +static int __init sifive_l2_probe(struct platform_device *pdev)
>   {
> -	struct device_node *np;
> -	struct resource res;
> -	int i, rc, intr_num;
> -
> -	np = of_find_matching_node(NULL, sifive_l2_ids);
> -	if (!np)
> -		return -ENODEV;
> -
> -	if (of_address_to_resource(np, 0, &res))
> -		return -ENODEV;
> -
> -	l2_base = ioremap(res.start, resource_size(&res));
> -	if (!l2_base)
> -		return -ENOMEM;
> -
> -	intr_num = of_property_count_u32_elems(np, "interrupts");
> -	if (!intr_num) {
> -		pr_err("L2CACHE: no interrupts property\n");
> -		return -ENODEV;
> -	}
> -
> -	for (i = 0; i < intr_num; i++) {
> -		g_irq[i] = irq_of_parse_and_map(np, i);
> -		rc = request_irq(g_irq[i], l2_int_handler, 0, "l2_ecc", NULL);
> -		if (rc) {
> -			pr_err("L2CACHE: Could not request IRQ %d\n", g_irq[i]);
> -			return rc;
> -		}
> +	struct device *dev = &pdev->dev;
> +	int nirqs;
> +	int ret;
> +	int i;
> +
> +	l2_base = devm_platform_ioremap_resource(pdev, 0);
> +	if (IS_ERR(l2_base))
> +		return PTR_ERR(l2_base);
> +
> +	nirqs = platform_irq_count(pdev);
> +	if (nirqs <= 0)
> +		return dev_err_probe(dev, -ENODEV, "no interrupts\n");

I wonder if zero irqs is an actual issue here?

> +	for (i = 0; i < nirqs; i++) {
> +		g_irq[i] = platform_get_irq(pdev, i);

I wonder if we need to keep g_irq[] around now? Is it going to be useful 
in the future?

> +		if (g_irq[i] < 0)
> +			return g_irq[i];
> +
> +		ret = devm_request_irq(dev, g_irq[i], l2_int_handler, 0, pdev->name, NULL);
> +		if (ret)
> +			return dev_err_probe(dev, ret, "Could not request IRQ %d\n", g_irq[i]);
>   	}
>   
>   	l2_config_read();
> @@ -234,4 +221,18 @@ static int __init sifive_l2_init(void)
>   #endif
>   	return 0;
>   }
> -device_initcall(sifive_l2_init);
> +
> +static const struct of_device_id sifive_l2_match[] = {
> +	{ .compatible = "sifive,fu540-c000-ccache" },
> +	{ .compatible = "sifive,fu740-c000-ccache" },
> +	{ /* sentinel */ }
> +};
> +
> +static struct platform_driver sifive_l2_driver = {
> +	.driver = {
> +		.name = "sifive_l2_cache",
> +		.of_match_table = sifive_l2_match,
> +		.suppress_bind_attrs = true,
> +	},
> +};
> +builtin_platform_driver_probe(sifive_l2_driver, sifive_l2_probe);




More information about the linux-riscv mailing list