[PATCH v1 08/30] reset: starfive: jh7100: Use regmap APIs to operate registers
Hal Feng
hal.feng at linux.starfivetech.com
Thu Sep 29 07:32:03 PDT 2022
Reset registers address region is shared with clock controller
on the new StarFive JH7110 SoC. Change to use regmap framework
to allow base address sharing and preparation for JH7110 reset
support.
Signed-off-by: Hal Feng <hal.feng at linux.starfivetech.com>
---
drivers/reset/reset-starfive-jh7100.c | 61 +++++++++++++++------------
1 file changed, 34 insertions(+), 27 deletions(-)
diff --git a/drivers/reset/reset-starfive-jh7100.c b/drivers/reset/reset-starfive-jh7100.c
index a6e0945071e9..8cba62348a16 100644
--- a/drivers/reset/reset-starfive-jh7100.c
+++ b/drivers/reset/reset-starfive-jh7100.c
@@ -3,15 +3,14 @@
* Reset driver for the StarFive JH7100 SoC
*
* Copyright (C) 2021 Emil Renner Berthing <kernel at esmil.dk>
+ * Copyright (C) 2021-2022 StarFive Technology Co., Ltd.
*/
-#include <linux/bitmap.h>
-#include <linux/io.h>
-#include <linux/iopoll.h>
-#include <linux/mod_devicetable.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of.h>
#include <linux/platform_device.h>
+#include <linux/regmap.h>
#include <linux/reset-controller.h>
-#include <linux/spinlock.h>
#include <dt-bindings/reset/starfive-jh7100.h>
@@ -49,9 +48,7 @@ static const u32 jh7100_reset_asserted[4] = {
struct jh7100_reset {
struct reset_controller_dev rcdev;
- /* protect registers against concurrent read-modify-write */
- spinlock_t lock;
- void __iomem *base;
+ struct regmap *regmap;
};
static inline struct jh7100_reset *
@@ -64,31 +61,34 @@ static int jh7100_reset_update(struct reset_controller_dev *rcdev,
unsigned long id, bool assert)
{
struct jh7100_reset *data = jh7100_reset_from(rcdev);
- unsigned long offset = id / 32;
+ u32 offset = id / 32;
u32 mask = BIT(id % 32);
- void __iomem *reg_assert = data->base + JH7100_RESET_ASSERT0 + offset * sizeof(u32);
- void __iomem *reg_status = data->base + JH7100_RESET_STATUS0 + offset * sizeof(u32);
+ u32 reg_assert = JH7100_RESET_ASSERT0 + offset * sizeof(u32);
+ u32 reg_status = JH7100_RESET_STATUS0 + offset * sizeof(u32);
u32 done = jh7100_reset_asserted[offset] & mask;
u32 value;
- unsigned long flags;
int ret;
if (!assert)
done ^= mask;
- spin_lock_irqsave(&data->lock, flags);
-
- value = readl(reg_assert);
if (assert)
- value |= mask;
+ ret = regmap_update_bits(data->regmap, reg_assert, mask, mask);
else
- value &= ~mask;
- writel(value, reg_assert);
+ ret = regmap_update_bits(data->regmap, reg_assert, mask, 0);
+
+ if (ret)
+ return ret;
/* if the associated clock is gated, deasserting might otherwise hang forever */
- ret = readl_poll_timeout_atomic(reg_status, value, (value & mask) == done, 0, 1000);
+ ret = regmap_read_poll_timeout_atomic(data->regmap,
+ reg_status,
+ value, (value & mask) == done,
+ 0, 1000);
+ if (ret)
+ dev_warn(rcdev->dev, "id:%ld bank:%d, mask:%#x assert:%#x status:%#x ret:%d\n",
+ id, offset, mask, reg_assert, reg_status, ret);
- spin_unlock_irqrestore(&data->lock, flags);
return ret;
}
@@ -120,10 +120,15 @@ static int jh7100_reset_status(struct reset_controller_dev *rcdev,
unsigned long id)
{
struct jh7100_reset *data = jh7100_reset_from(rcdev);
- unsigned long offset = id / 32;
+ u32 offset = id / 32;
u32 mask = BIT(id % 32);
- void __iomem *reg_status = data->base + JH7100_RESET_STATUS0 + offset * sizeof(u32);
- u32 value = readl(reg_status);
+ u32 reg_status = JH7100_RESET_STATUS0 + offset * sizeof(u32);
+ u32 value;
+ int ret;
+
+ ret = regmap_read(data->regmap, reg_status, &value);
+ if (ret)
+ return ret;
return !((value ^ jh7100_reset_asserted[offset]) & mask);
}
@@ -143,16 +148,18 @@ static int __init jh7100_reset_probe(struct platform_device *pdev)
if (!data)
return -ENOMEM;
- data->base = devm_platform_ioremap_resource(pdev, 0);
- if (IS_ERR(data->base))
- return PTR_ERR(data->base);
+ data->regmap = device_node_to_regmap(pdev->dev.of_node);
+ if (IS_ERR(data->regmap)) {
+ dev_err(&pdev->dev, "failed to get regmap (error %ld)\n",
+ PTR_ERR(data->regmap));
+ return PTR_ERR(data->regmap);
+ }
data->rcdev.ops = &jh7100_reset_ops;
data->rcdev.owner = THIS_MODULE;
data->rcdev.nr_resets = JH7100_RSTN_END;
data->rcdev.dev = &pdev->dev;
data->rcdev.of_node = pdev->dev.of_node;
- spin_lock_init(&data->lock);
return devm_reset_controller_register(&pdev->dev, &data->rcdev);
}
--
2.17.1
More information about the linux-riscv
mailing list