[PATCH v1 00/30] Basic StarFive JH7110 RISC-V SoC support
Hal Feng
hal.feng at linux.starfivetech.com
Thu Sep 29 07:31:55 PDT 2022
This series adds basic support for the StarFive JH7110 RISC-V SoC to
boot up and get a serial console. This series includes basic clock,
reset, pinctrl and uart drivers, which are necessary for booting.
It's should be noted that the reset and clock driver codes of JH7110
are partly common with those of JH7100, so the common codes are
factored out and can be reused by drivers of JH7110 and other more
SoCs from StarFive.
The JH7110 is the upgraded version of JH7100 and also the first official
released version of JH71XX series SoCs from StarFive Technology Ltd.
The VisionFive 2 boards equipped with JH7110 SoCs are launched
recently [1]. More information and support can visit RVspace wiki [2].
This series is also available at
https://github.com/hal-feng/linux/commits/visionfive2-minimal
[1] https://www.cnx-software.com/2022/08/23/starfive-visionfive-2-quad-core-risc-v-sbc-linux/
[2] https://wiki.rvspace.org/
Emil Renner Berthing (17):
dt-bindings: riscv: Add StarFive JH7110 bindings
dt-bindings: timer: Add StarFive JH7110 clint
dt-bindings: interrupt-controller: Add StarFive JH7110 plic
dt-bindings: sifive-l2-cache: Support StarFive JH71x0 SoCs
soc: sifive: l2 cache: Convert to platform driver
soc: sifive: l2 cache: Add StarFive JH71x0 support
reset: starfive: jh7100: Use 32bit I/O on 32bit registers
dt-bindings: reset: Add StarFive JH7110 reset definitions
clk: starfive: Factor out common clock driver code
dt-bindings: clock: Add StarFive JH7110 system clock definitions
dt-bindings: clock: Add starfive,jh7110-clkgen-sys bindings
clk: starfive: Add StarFive JH7110 system clock driver
dt-bindings: clock: Add StarFive JH7110 always-on definitions
dt-bindings: clock: Add starfive,jh7110-clkgen-aon bindings
clk: starfive: Add StarFive JH7110 always-on clock driver
RISC-V: Add initial StarFive JH7110 device tree
RISC-V: Add StarFive JH7110 VisionFive2 board device tree
Hal Feng (8):
reset: starfive: jh7100: Use regmap APIs to operate registers
reset: starfive: jh7100: Move necessary properties to device tree
reset: starfive: Rename 'reset-starfive-jh7100.c' to
'reset-starfive.c'
dt-bindings: reset: Add starfive,jh7110-reset bindings
reset: starfive: Add StarFive JH7110 SoC support
clk: starfive: Use regmap APIs to operate registers
RISC-V: defconfig: Enable CONFIG_SERIAL_8250_DW
RISC-V: Add StarFive JH7100 and JH7110 SoC Kconfig options
Jianlong Huang (5):
pinctrl: Create subdirectory for StarFive drivers
pinctrl: starfive: Rename "pinctrl-starfive" to
"pinctrl-starfive-jh7100"
dt-bindings: pinctrl: Add StarFive JH7110 pinctrl definitions
dt-bindings: pinctrl: Add StarFive JH7110 pinctrl bindings
pinctrl: starfive: Add StarFive JH7110 driver
.../clock/starfive,jh7110-clkgen-aon.yaml | 62 ++
.../clock/starfive,jh7110-clkgen-sys.yaml | 69 ++
.../sifive,plic-1.0.0.yaml | 1 +
.../pinctrl/starfive,jh7100-pinctrl.yaml | 2 +-
.../pinctrl/starfive,jh7110-pinctrl.yaml | 202 ++++
.../bindings/reset/starfive,jh7100-reset.yaml | 20 +
.../bindings/reset/starfive,jh7110-reset.yaml | 54 +
.../bindings/riscv/sifive-l2-cache.yaml | 4 +
.../devicetree/bindings/riscv/starfive.yaml | 3 +
.../bindings/timer/sifive,clint.yaml | 1 +
MAINTAINERS | 27 +-
arch/riscv/Kconfig.socs | 28 +-
arch/riscv/boot/dts/starfive/Makefile | 3 +-
.../dts/starfive/jh7100-beaglev-starlight.dts | 2 +-
arch/riscv/boot/dts/starfive/jh7100.dtsi | 3 +
.../jh7110-starfive-visionfive-v2.dts | 91 ++
arch/riscv/boot/dts/starfive/jh7110.dtsi | 449 +++++++++
arch/riscv/configs/defconfig | 1 +
drivers/clk/starfive/Kconfig | 29 +-
drivers/clk/starfive/Makefile | 6 +-
.../clk/starfive/clk-starfive-jh7100-audio.c | 138 +--
drivers/clk/starfive/clk-starfive-jh7100.c | 836 +++++-----------
drivers/clk/starfive/clk-starfive-jh7100.h | 112 ---
.../clk/starfive/clk-starfive-jh7110-aon.c | 161 +++
.../clk/starfive/clk-starfive-jh7110-sys.c | 648 ++++++++++++
drivers/clk/starfive/clk-starfive.c | 349 +++++++
drivers/clk/starfive/clk-starfive.h | 112 +++
drivers/pinctrl/Kconfig | 18 +-
drivers/pinctrl/Makefile | 2 +-
drivers/pinctrl/starfive/Kconfig | 37 +
drivers/pinctrl/starfive/Makefile | 8 +
drivers/pinctrl/starfive/pinctrl-jh7110-aon.c | 718 ++++++++++++++
drivers/pinctrl/starfive/pinctrl-jh7110-sys.c | 925 +++++++++++++++++
.../pinctrl-starfive-jh7100.c} | 10 +-
drivers/pinctrl/starfive/pinctrl-starfive.c | 539 ++++++++++
drivers/pinctrl/starfive/pinctrl-starfive.h | 131 +++
drivers/reset/Kconfig | 7 +-
drivers/reset/Makefile | 2 +-
drivers/reset/reset-starfive-jh7100.c | 173 ----
drivers/reset/reset-starfive.c | 218 ++++
drivers/soc/Makefile | 2 +-
drivers/soc/sifive/Kconfig | 2 +-
drivers/soc/sifive/sifive_l2_cache.c | 86 +-
.../dt-bindings/clock/starfive-jh7110-aon.h | 26 +
.../dt-bindings/clock/starfive-jh7110-sys.h | 215 ++++
...l-starfive.h => pinctrl-starfive-jh7100.h} | 6 +-
.../pinctrl/pinctrl-starfive-jh7110.h | 931 ++++++++++++++++++
include/dt-bindings/reset/starfive-jh7110.h | 154 +++
48 files changed, 6604 insertions(+), 1019 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/starfive,jh7110-clkgen-aon.yaml
create mode 100644 Documentation/devicetree/bindings/clock/starfive,jh7110-clkgen-sys.yaml
create mode 100644 Documentation/devicetree/bindings/pinctrl/starfive,jh7110-pinctrl.yaml
create mode 100644 Documentation/devicetree/bindings/reset/starfive,jh7110-reset.yaml
create mode 100644 arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-v2.dts
create mode 100644 arch/riscv/boot/dts/starfive/jh7110.dtsi
delete mode 100644 drivers/clk/starfive/clk-starfive-jh7100.h
create mode 100644 drivers/clk/starfive/clk-starfive-jh7110-aon.c
create mode 100644 drivers/clk/starfive/clk-starfive-jh7110-sys.c
create mode 100644 drivers/clk/starfive/clk-starfive.c
create mode 100644 drivers/clk/starfive/clk-starfive.h
create mode 100644 drivers/pinctrl/starfive/Kconfig
create mode 100644 drivers/pinctrl/starfive/Makefile
create mode 100644 drivers/pinctrl/starfive/pinctrl-jh7110-aon.c
create mode 100644 drivers/pinctrl/starfive/pinctrl-jh7110-sys.c
rename drivers/pinctrl/{pinctrl-starfive.c => starfive/pinctrl-starfive-jh7100.c} (99%)
create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive.c
create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive.h
delete mode 100644 drivers/reset/reset-starfive-jh7100.c
create mode 100644 drivers/reset/reset-starfive.c
create mode 100644 include/dt-bindings/clock/starfive-jh7110-aon.h
create mode 100644 include/dt-bindings/clock/starfive-jh7110-sys.h
rename include/dt-bindings/pinctrl/{pinctrl-starfive.h => pinctrl-starfive-jh7100.h} (98%)
create mode 100644 include/dt-bindings/pinctrl/pinctrl-starfive-jh7110.h
create mode 100644 include/dt-bindings/reset/starfive-jh7110.h
--
2.17.1
More information about the linux-riscv
mailing list