[PATCH v3 05/10] RISC-V: Kconfig.socs: Add Renesas RZ/Five SoC kconfig option

[Lad, Prabhakar]

Hi Conor,

Thank you for the review.

On Thu, Sep 15, 2022 at 9:59 PM <Conor.Dooley at microchip.com> wrote:
>
> On 15/09/2022 19:15, Prabhakar wrote:
> > EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> >
> > From: Lad Prabhakar <prabhakar.mahadev-lad.rj at bp.renesas.com>
> >
> > Introduce SOC_RENESAS_RZFIVE config option to enable Renesas RZ/Five
> > (R9A07G043) SoC, along side also add ARCH_RENESAS config option as most
> > of the Renesas drivers depend on this config option.
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj at bp.renesas.com>
> > Reviewed-by: Geert Uytterhoeven <geert+renesas at glider.be>
> > ---
> > v2->v3
> > * Included RB tag from Geert
> >
> > v1->v2
> > * No Change
> > ---
> >  arch/riscv/Kconfig.socs | 14 ++++++++++++++
> >  1 file changed, 14 insertions(+)
> >
> > diff --git a/arch/riscv/Kconfig.socs b/arch/riscv/Kconfig.socs
> > index 69774bb362d6..91b7f38b77a8 100644
> > --- a/arch/riscv/Kconfig.socs
> > +++ b/arch/riscv/Kconfig.socs
> > @@ -80,4 +80,18 @@ config SOC_CANAAN_K210_DTB_SOURCE
> >
> >  endif # SOC_CANAAN
> >
> > +config ARCH_RENESAS
> > +       bool
> > +       select GPIOLIB
> > +       select PINCTRL
> > +       select SOC_BUS
>
> Do you really need to select SOC_BUS?
> Noone else does on RISC-V, hence my curiosity.
>
Yes we do need SOC_BUS due to soc_device_register() call in [0].
Digging further I realized we can drop the above SOC_BUS as
SOC_RENESAS is selecting SOC_BUS [1]

[0] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/soc/renesas/renesas-soc.c?h=v6.0-rc5#n487
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/soc/renesas/Kconfig?h=v6.0-rc5#n5

> > +
> > +config SOC_RENESAS_RZFIVE
> > +       bool "Renesas RZ/Five SoC"
> > +       select ARCH_R9A07G043
> > +       select ARCH_RENESAS
> > +       select RESET_CONTROLLER
> > +       help
> > +         This enables support for Renesas RZ/Five SoC.
>
> :thinking: isn't this pretty much what we decided not to do?
> And instead you would redefine ARCH_RENESAS in this file and
> not use SOC_RENESAS* at all? Will save me having to purge the
> the SOC symbol when I do the conversion.
>
I was under the impression we didn't come to a conclusion so kept the
patch as is. I'll just make ARCH_RENESAS visible as Geert suggested
something like below:

        config ARCH_RENESAS
            bool "Renesas RISC-V SoCs"
            select GPIOLIB
            select PINCTRL
            select RESET_CONTROLLER


Cheers,
Prabhakar