[PATCH 0/3] Enable initial support for StarFive VisionFive V1 SBC

[Cristian Ciocaltea]

The StarFive VisionFive V1 SBC [1] is similar with the already supported
BeagleV Starlight Beta board, both being based on the StarFive JH7100 SoC.

In addition to documenting the necessary compatibles, this patch series 
moves most of the content from jh7100-beaglev-starlight.dts to a new file
jh7100-common.dtsi, to be shared between the two boards.

No other changes are required in order to successfully boot the board.

[1] https://github.com/starfive-tech/VisionFive

Cristian Ciocaltea (3):
  dt-bindings: riscv: starfive: Add StarFive VisionFive V1 board
  riscv: dts: starfive: Add common DT for JH7100 based boards
  riscv: dts: starfive: Add StarFive VisionFive V1 device tree

 .../devicetree/bindings/riscv/starfive.yaml   |   3 +
 arch/riscv/boot/dts/starfive/Makefile         |   2 +-
 .../dts/starfive/jh7100-beaglev-starlight.dts | 153 +----------------
 .../boot/dts/starfive/jh7100-common.dtsi      | 161 ++++++++++++++++++
 .../jh7100-starfive-visionfive-v1.dts         |  20 +++
 5 files changed, 186 insertions(+), 153 deletions(-)
 create mode 100644 arch/riscv/boot/dts/starfive/jh7100-common.dtsi
 create mode 100644 arch/riscv/boot/dts/starfive/jh7100-starfive-visionfive-v1.dts

-- 
2.37.2