[PATCH V4 1/2] RISC-V: Add arch_crash_save_vmcoreinfo support
Xianting Tian
xianting.tian at linux.alibaba.com
Wed Oct 26 07:24:05 PDT 2022
在 2022/10/26 下午9:47, Conor Dooley 写道:
> On Wed, Oct 26, 2022 at 08:05:41PM +0800, Baoquan He wrote:
>> Hi Xianting,
>>
>> On 10/26/22 at 05:44pm, Xianting Tian wrote:
>>> 在 2022/10/26 下午5:25, Conor Dooley 写道:
>>>> On Wed, Oct 26, 2022 at 05:08:11PM +0800, Xianting Tian wrote:
>>>>> Hi Palmer, Conor
>>>>>
>>>>> Is this version OK for you?
>>>> The weird ifdef/IS_ENABLED thing was the only comment I had. It's a bit
>>>> odd & I notice Baoquan brought it up too. I didn't (and won't) give you
>>>> a reviewed by on these patches because I don't understand the area well
>>>> enough. The general nitpickery seems to be sorted though.
>>> I checked the KERNEL_LINK_ADDR definition of riscv, it is valid for
>>> CONFIG_64BIT and !CONFIG_64BIT.
>> This series looks good to me. My only minor concern is if we can make
>> the arch_crash_save_vmcoreinfo() as below. I don't understand why we
>> have to have the CONFIG_64BIT ifdeffery and the IS_ENABLED(CONFIG_64BIT)
>> between two adjacent code blocks. Not sure if we are saying the same
>> thing.
> I think we can just go and drop the IS_ENABLED(). From looking at it
> last time, one bit is compileable (but not usable) for !64BIT and the
> other isn't hence the IS_ENABLED(). I think it would make sense to drop
> the IS_ENABLED() - I don't think we're too likely to hit some compile
> testing edge cases that IS_ENABLED() would help with & only having one
> makes the code look a lot less odd and a lot more intentional.
thanks, I will send V5 patch for review.
>
>> +void arch_crash_save_vmcoreinfo(void)
>> +{
>> + VMCOREINFO_NUMBER(VA_BITS);
>> + VMCOREINFO_NUMBER(phys_ram_base);
>> +
>> + vmcoreinfo_append_str("NUMBER(PAGE_OFFSET)=0x%lx\n", PAGE_OFFSET);
>> + vmcoreinfo_append_str("NUMBER(VMALLOC_START)=0x%lx\n", VMALLOC_START);
>> + vmcoreinfo_append_str("NUMBER(VMALLOC_END)=0x%lx\n", VMALLOC_END);
>> + vmcoreinfo_append_str("NUMBER(VMEMMAP_START)=0x%lx\n", VMEMMAP_START);
>> + vmcoreinfo_append_str("NUMBER(VMEMMAP_END)=0x%lx\n", VMEMMAP_END);
>> +#ifdef CONFIG_64BIT
>> + vmcoreinfo_append_str("NUMBER(MODULES_VADDR)=0x%lx\n", MODULES_VADDR);
>> + vmcoreinfo_append_str("NUMBER(MODULES_END)=0x%lx\n", MODULES_END);
>> + vmcoreinfo_append_str("NUMBER(KERNEL_LINK_ADDR)=0x%lx\n", KERNEL_LINK_ADDR);
>> +#endif
>> +}
>>
>>> Maybe we can remove IS_ENABLED(CONFIG_64BIT)
>>>
>>> arch/riscv/include/asm/pgtable.h
>>> #define ADDRESS_SPACE_END (UL(-1))
>>> #ifdef CONFIG_64BIT
>>> /* Leave 2GB for kernel and BPF at the end of the address space */
>>> #define KERNEL_LINK_ADDR (ADDRESS_SPACE_END - SZ_2G + 1)
>>> #else
>>> #define KERNEL_LINK_ADDR PAGE_OFFSET
>>> #endif
>>>
>>> arch/riscv/include/asm/page.h
>>> #ifdef CONFIG_64BIT
>>> #ifdef CONFIG_MMU
>>> #define PAGE_OFFSET kernel_map.page_offset
>>> #else
>>> #define PAGE_OFFSET _AC(CONFIG_PAGE_OFFSET, UL)
>>> #endif
>>> /*
>>> * By default, CONFIG_PAGE_OFFSET value corresponds to SV48 address space so
>>> * define the PAGE_OFFSET value for SV39.
>>> */
>>> #define PAGE_OFFSET_L4 _AC(0xffffaf8000000000, UL)
>>> #define PAGE_OFFSET_L3 _AC(0xffffffd800000000, UL)
>>> #else
>>> #define PAGE_OFFSET _AC(CONFIG_PAGE_OFFSET, UL)
>>> #endif /* CONFIG_64BIT */
>>>
>>>> Thanks,
>>>> Conor.
>>>>
>>>>> 在 2022/10/20 下午12:40, Xianting Tian 写道:
>>>>>> 在 2022/10/20 上午11:05, Baoquan He 写道:
>>>>>>> On 10/20/22 at 10:17am, Xianting Tian wrote:
>>>>>>>> 在 2022/10/20 上午10:08, Baoquan He 写道:
>>>>>>>>> On 10/19/22 at 06:36pm, Xianting Tian wrote:
>>>>>>>>>> Add arch_crash_save_vmcoreinfo(), which exports VM
>>>>>>>>>> layout(MODULES, VMALLOC,
>>>>>>>>>> VMEMMAP ranges and KERNEL_LINK_ADDR), va bits and ram
>>>>>>>>>> base for vmcore.
>>>>>>>>>>
>>>>>>>>>> Default pagetable levels and PAGE_OFFSET aren't same for
>>>>>>>>>> different kernel
>>>>>>>>>> version as below. For pagetable levels, it sets sv57 by
>>>>>>>>>> default and falls
>>>>>>>>>> back to setting sv48 at boot time if sv57 is not
>>>>>>>>>> supported by the hardware.
>>>>>>>>>>
>>>>>>>>>> For ram base, the default value is 0x80200000 for qemu
>>>>>>>>>> riscv64 env and,
>>>>>>>>>> for example, is 0x200000 on the XuanTie 910 CPU.
>>>>>>>>>>
>>>>>>>>>> * Linux Kernel 5.18 ~
>>>>>>>>>> * PGTABLE_LEVELS = 5
>>>>>>>>>> * PAGE_OFFSET = 0xff60000000000000
>>>>>>>>>> * Linux Kernel 5.17 ~
>>>>>>>>>> * PGTABLE_LEVELS = 4
>>>>>>>>>> * PAGE_OFFSET = 0xffffaf8000000000
>>>>>>>>>> * Linux Kernel 4.19 ~
>>>>>>>>>> * PGTABLE_LEVELS = 3
>>>>>>>>>> * PAGE_OFFSET = 0xffffffe000000000
>>>>>>>>>>
>>>>>>>>>> Since these configurations change from time to time and
>>>>>>>>>> version to version,
>>>>>>>>>> it is preferable to export them via vmcoreinfo than to
>>>>>>>>>> change the crash's
>>>>>>>>>> code frequently, it can simplify the development of crash tool.
>>>>>>>>>>
>>>>>>>>>> Signed-off-by: Xianting Tian <xianting.tian at linux.alibaba.com>
>>>>>>>>>> ---
>>>>>>>>>> arch/riscv/kernel/Makefile | 1 +
>>>>>>>>>> arch/riscv/kernel/crash_core.c | 23 +++++++++++++++++++++++
>>>>>>>>>> 2 files changed, 24 insertions(+)
>>>>>>>>>> create mode 100644 arch/riscv/kernel/crash_core.c
>>>>>>>>>>
>>>>>>>>>> diff --git a/arch/riscv/kernel/Makefile b/arch/riscv/kernel/Makefile
>>>>>>>>>> index db6e4b1294ba..4cf303a779ab 100644
>>>>>>>>>> --- a/arch/riscv/kernel/Makefile
>>>>>>>>>> +++ b/arch/riscv/kernel/Makefile
>>>>>>>>>> @@ -81,6 +81,7 @@ obj-$(CONFIG_KGDB) += kgdb.o
>>>>>>>>>> obj-$(CONFIG_KEXEC_CORE) += kexec_relocate.o
>>>>>>>>>> crash_save_regs.o machine_kexec.o
>>>>>>>>>> obj-$(CONFIG_KEXEC_FILE) += elf_kexec.o machine_kexec_file.o
>>>>>>>>>> obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
>>>>>>>>>> +obj-$(CONFIG_CRASH_CORE) += crash_core.o
>>>>>>>>>> obj-$(CONFIG_JUMP_LABEL) += jump_label.o
>>>>>>>>>> diff --git a/arch/riscv/kernel/crash_core.c
>>>>>>>>>> b/arch/riscv/kernel/crash_core.c
>>>>>>>>>> new file mode 100644
>>>>>>>>>> index 000000000000..3e889d0ed7bd
>>>>>>>>>> --- /dev/null
>>>>>>>>>> +++ b/arch/riscv/kernel/crash_core.c
>>>>>>>>>> @@ -0,0 +1,23 @@
>>>>>>>>>> +// SPDX-License-Identifier: GPL-2.0-only
>>>>>>>>>> +
>>>>>>>>>> +#include <linux/crash_core.h>
>>>>>>>>>> +#include <linux/pagemap.h>
>>>>>>>>>> +
>>>>>>>>>> +void arch_crash_save_vmcoreinfo(void)
>>>>>>>>>> +{
>>>>>>>>>> + VMCOREINFO_NUMBER(VA_BITS);
>>>>>>>>>> + VMCOREINFO_NUMBER(phys_ram_base);
>>>>>>>>>> +
>>>>>>>>>> +
>>>>>>>>>> vmcoreinfo_append_str("NUMBER(PAGE_OFFSET)=0x%lx\n",
>>>>>>>>>> PAGE_OFFSET);
>>>>>>>>>> + vmcoreinfo_append_str("NUMBER(VMALLOC_START)=0x%lx\n",
>>>>>>>>>> VMALLOC_START);
>>>>>>>>>> +
>>>>>>>>>> vmcoreinfo_append_str("NUMBER(VMALLOC_END)=0x%lx\n",
>>>>>>>>>> VMALLOC_END);
>>>>>>>>>> + vmcoreinfo_append_str("NUMBER(VMEMMAP_START)=0x%lx\n",
>>>>>>>>>> VMEMMAP_START);
>>>>>>>>>> +
>>>>>>>>>> vmcoreinfo_append_str("NUMBER(VMEMMAP_END)=0x%lx\n",
>>>>>>>>>> VMEMMAP_END);
>>>>>>>>>> +#ifdef CONFIG_64BIT
>>>>>>>>>> + vmcoreinfo_append_str("NUMBER(MODULES_VADDR)=0x%lx\n",
>>>>>>>>>> MODULES_VADDR);
>>>>>>>>>> +
>>>>>>>>>> vmcoreinfo_append_str("NUMBER(MODULES_END)=0x%lx\n",
>>>>>>>>>> MODULES_END);
>>>>>>>>>> +#endif
>>>>>>>>>> +
>>>>>>>>>> + if (IS_ENABLED(CONFIG_64BIT))
>>>>>>>>>> +
>>>>>>>>>> vmcoreinfo_append_str("NUMBER(KERNEL_LINK_ADDR)=0x%lx\n",
>>>>>>>>>> KERNEL_LINK_ADDR);
>>>>>>>>> Wondering why you don't put KERNEL_LINK_ADDR exporting into the above
>>>>>>>>> ifdeffery scope, with that you can save one line of
>>>>>>>>> "IS_ENABLED(CONFIG_64BIT)".
>>>>>>>> I followed the rule in print_vm_layout() of
>>>>>>>> arch/riscv/mm/init.c, which used
>>>>>>>> IS_ENABLED when print the value of KERNEL_LINK_ADDR.
>>>>>>>>
>>>>>>> I see. There's PAGE_OFFSET in the middle. Thanks.
>>>>>>>
>>>>>>> print_ml("lowmem", (unsigned long)PAGE_OFFSET,
>>>>>>> (unsigned long)high_memory)
>>>>>>>
>>>>>>> So now, do you think if it's necessary to have another
>>>>>>> IS_ENABLED(CONFIG_64BIT) in the current arch_crash_save_vmcoreinfo()?
>>>>>> For which MACRO? I think current code for PAGE_OFFSET is OK.
>>>>>>
More information about the linux-riscv
mailing list