[PATCH v1] riscv: dts: icicle: Add GPIO controlled LEDs

[Emil Renner Berthing]

This adds the 4 GPIO controlled LEDs to the Microchip PolarFire-SoC
Icicle Kit device tree. The schematic doesn't specify any special
function for the LEDs, so they're added here without any default
triggers and named led1, led2, led3 and led4 just like in the schematic.

Signed-off-by: Emil Renner Berthing <emil.renner.berthing at canonical.com>
---
 .../boot/dts/microchip/mpfs-icicle-kit.dts    | 30 +++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts
index ec7b7c2a3ce2..11ba4417f11a 100644
--- a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts
+++ b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts
@@ -5,6 +5,8 @@
 
 #include "mpfs.dtsi"
 #include "mpfs-icicle-kit-fabric.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
 
 /* Clock frequency (in Hz) of the rtcclk */
 #define RTCCLK_FREQ		1000000
@@ -31,6 +33,34 @@ cpus {
 		timebase-frequency = <RTCCLK_FREQ>;
 	};
 
+	leds {
+		compatible = "gpio-leds";
+
+		led-1 {
+			gpios = <&gpio2 16 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_RED>;
+			label = "led1";
+		};
+
+		led-2 {
+			gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_RED>;
+			label = "led2";
+		};
+
+		led-3 {
+			gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_AMBER>;
+			label = "led3";
+		};
+
+		led-4 {
+			gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_AMBER>;
+			label = "led4";
+		};
+	};
+
 	ddrc_cache_lo: memory at 80000000 {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x0 0x40000000>;
-- 
2.37.2