[PATCH v4 0/3] Enable initial support for StarFive VisionFive V1 SBC

[Cristian Ciocaltea]

The StarFive VisionFive V1 SBC [1] is similar with the already supported
BeagleV Starlight Beta board, both being based on the StarFive JH7100 SoC.

In addition to documenting the necessary compatibles, this patch series 
moves most of the content from jh7100-beaglev-starlight.dts to a new file
jh7100-common.dtsi, to be shared between the two boards.

No other changes are required in order to successfully boot the board.

[1] https://github.com/starfive-tech/VisionFive

Changes in v4:
 - Rebased onto v6.1.0-rc1
 - Fixed a conflict in patch 2/3 as pinctrl-starfive.h has been renamed
   to pinctrl-starfive-jh7100.h

Changes in v3:
 - Added Reviewed-by tag from Krzysztof in patch 1/3
 - Optimized patch 2/3 by enabling copy detection on "git format-patch",
   as indicated by Krzysztof

Changes in v2:
 - Simplified documentation by using 'enum' instead of 'const' in 
   patch 1/3, according to Conor's review
 - Added Reviewed-by tags from Conor

Cristian Ciocaltea (3):
  dt-bindings: riscv: starfive: Add StarFive VisionFive V1 board
  riscv: dts: starfive: Add common DT for JH7100 based boards
  riscv: dts: starfive: Add StarFive VisionFive V1 device tree

 .../devicetree/bindings/riscv/starfive.yaml   |   4 +-
 arch/riscv/boot/dts/starfive/Makefile         |   2 +-
 .../dts/starfive/jh7100-beaglev-starlight.dts | 153 +-----------------
 ...aglev-starlight.dts => jh7100-common.dtsi} |   3 -
 .../jh7100-starfive-visionfive-v1.dts         |  20 +++
 5 files changed, 25 insertions(+), 157 deletions(-)
 copy arch/riscv/boot/dts/starfive/{jh7100-beaglev-starlight.dts => jh7100-common.dtsi} (96%)
 create mode 100644 arch/riscv/boot/dts/starfive/jh7100-starfive-visionfive-v1.dts


base-commit: 9abf2313adc1ca1b6180c508c25f22f9395cc780
-- 
2.38.0