[PATCH v2] RISC-V: KVM: Fix compilation without RISCV_ISA_ZICBOM
Conor Dooley
conor at kernel.org
Thu Oct 13 13:05:33 PDT 2022
On Thu, Oct 13, 2022 at 04:39:31PM +0200, Andrew Jones wrote:
> On Thu, Oct 13, 2022 at 03:21:06PM +0100, Conor Dooley wrote:
> > On Thu, Oct 13, 2022 at 03:42:17PM +0200, Andrew Jones wrote:
> >
> > > RISC-V: KVM: Fix compilation without RISCV_ISA_ZICBOM
> >
> > nit: I know that this is what it fixes, but I think the commit subject
> > is a little misleading when it doesnt touch arch/riscv/kvm & has some
> > meaning for non-kvm too.
>
> Yeah, in hindsight I probably should have just dropped the "RISC-V: KVM:
> Fix compilation without RISCV_ISA_ZICBOM" patch and rebased and resent
> Anup's move patch. I still can, if that's what people would prefer.
I'd image that that can be done at application time? idk what I'd go for
though, I am sick so my heads a little groggy. Say along the lines of
"RISC-V: make cbom blocksize info unconditionally available"?
Feel free to hate that Drew...
Conor.
>
> Thanks,
> drew
>
>
> >
> > > riscv_cbom_block_size and riscv_init_cbom_blocksize() should always
> > > be available and riscv_init_cbom_blocksize() should always be invoked
> >
> > Yup, I like where this is going...
> >
> > > even when compiling without RISCV_ISA_ZICBOM enabled. This
> > > is because disabling RISCV_ISA_ZICBOM means "don't use zicbom
> > > instructions in the kernel" not "pretend there isn't zicbom, even
> > > when there is". When zicbom is available, whether the kernel enables
> > > its use with RISCV_ISA_ZICBOM or not, KVM will offer it to guests.
> >
> > ...right, I'll take your word for this part. You're the kvm people :)
> >
> > > Ensure we can build KVM and that the block size is initialized even
> > > when compiling without RISCV_ISA_ZICBOM.
> > >
> > > Fixes: 8f7e001e0325 ("RISC-V: Clean up the Zicbom block size probing")
> > > Reported-by: kernel test robot <lkp at intel.com>
> > > Signed-off-by: Andrew Jones <ajones at ventanamicro.com>
> >
> > Is cacheflush.c the "right" place for it? idk. But shaving that yak is a
> > waste of time imo. I like the unconditional availability & if ZICBOM is
> > off in the kernel I figure it should not matter that we set the
> > blocksize.
> >
> > Reviewed-by: Conor Dooley <conor.dooley at microchip.com>
> >
> > > ---
> > > arch/riscv/include/asm/cacheflush.h | 8 ------
> > > arch/riscv/mm/cacheflush.c | 38 ++++++++++++++++++++++++++
> > > arch/riscv/mm/dma-noncoherent.c | 41 -----------------------------
> > > 3 files changed, 38 insertions(+), 49 deletions(-)
> > >
> > > diff --git a/arch/riscv/include/asm/cacheflush.h b/arch/riscv/include/asm/cacheflush.h
> > > index 273ece6b622f..1470e556cdb1 100644
> > > --- a/arch/riscv/include/asm/cacheflush.h
> > > +++ b/arch/riscv/include/asm/cacheflush.h
> > > @@ -42,16 +42,8 @@ void flush_icache_mm(struct mm_struct *mm, bool local);
> > >
> > > #endif /* CONFIG_SMP */
> > >
> > > -/*
> > > - * The T-Head CMO errata internally probe the CBOM block size, but otherwise
> > > - * don't depend on Zicbom.
> > > - */
> > > extern unsigned int riscv_cbom_block_size;
> > > -#ifdef CONFIG_RISCV_ISA_ZICBOM
> > > void riscv_init_cbom_blocksize(void);
> > > -#else
> > > -static inline void riscv_init_cbom_blocksize(void) { }
> > > -#endif
> > >
> > > #ifdef CONFIG_RISCV_DMA_NONCOHERENT
> > > void riscv_noncoherent_supported(void);
> > > diff --git a/arch/riscv/mm/cacheflush.c b/arch/riscv/mm/cacheflush.c
> > > index 6cb7d96ad9c7..8525f4a2d598 100644
> > > --- a/arch/riscv/mm/cacheflush.c
> > > +++ b/arch/riscv/mm/cacheflush.c
> > > @@ -3,6 +3,7 @@
> > > * Copyright (C) 2017 SiFive
> > > */
> > >
> > > +#include <linux/of.h>
> > > #include <asm/cacheflush.h>
> > >
> > > #ifdef CONFIG_SMP
> > > @@ -86,3 +87,40 @@ void flush_icache_pte(pte_t pte)
> > > flush_icache_all();
> > > }
> > > #endif /* CONFIG_MMU */
> > > +
> > > +unsigned int riscv_cbom_block_size;
> > > +EXPORT_SYMBOL(riscv_cbom_block_size);
> > > +
> > > +void riscv_init_cbom_blocksize(void)
> > > +{
> > > + struct device_node *node;
> > > + unsigned long cbom_hartid;
> > > + u32 val, probed_block_size;
> > > + int ret;
> > > +
> > > + probed_block_size = 0;
> > > + for_each_of_cpu_node(node) {
> > > + unsigned long hartid;
> > > +
> > > + ret = riscv_of_processor_hartid(node, &hartid);
> > > + if (ret)
> > > + continue;
> > > +
> > > + /* set block-size for cbom extension if available */
> > > + ret = of_property_read_u32(node, "riscv,cbom-block-size", &val);
> > > + if (ret)
> > > + continue;
> > > +
> > > + if (!probed_block_size) {
> > > + probed_block_size = val;
> > > + cbom_hartid = hartid;
> > > + } else {
> > > + if (probed_block_size != val)
> > > + pr_warn("cbom-block-size mismatched between harts %lu and %lu\n",
> > > + cbom_hartid, hartid);
> > > + }
> > > + }
> > > +
> > > + if (probed_block_size)
> > > + riscv_cbom_block_size = probed_block_size;
> > > +}
> > > diff --git a/arch/riscv/mm/dma-noncoherent.c b/arch/riscv/mm/dma-noncoherent.c
> > > index b0add983530a..d919efab6eba 100644
> > > --- a/arch/riscv/mm/dma-noncoherent.c
> > > +++ b/arch/riscv/mm/dma-noncoherent.c
> > > @@ -8,13 +8,8 @@
> > > #include <linux/dma-direct.h>
> > > #include <linux/dma-map-ops.h>
> > > #include <linux/mm.h>
> > > -#include <linux/of.h>
> > > -#include <linux/of_device.h>
> > > #include <asm/cacheflush.h>
> > >
> > > -unsigned int riscv_cbom_block_size;
> > > -EXPORT_SYMBOL_GPL(riscv_cbom_block_size);
> > > -
> > > static bool noncoherent_supported;
> > >
> > > void arch_sync_dma_for_device(phys_addr_t paddr, size_t size,
> > > @@ -77,42 +72,6 @@ void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
> > > dev->dma_coherent = coherent;
> > > }
> > >
> > > -#ifdef CONFIG_RISCV_ISA_ZICBOM
> > > -void riscv_init_cbom_blocksize(void)
> > > -{
> > > - struct device_node *node;
> > > - unsigned long cbom_hartid;
> > > - u32 val, probed_block_size;
> > > - int ret;
> > > -
> > > - probed_block_size = 0;
> > > - for_each_of_cpu_node(node) {
> > > - unsigned long hartid;
> > > -
> > > - ret = riscv_of_processor_hartid(node, &hartid);
> > > - if (ret)
> > > - continue;
> > > -
> > > - /* set block-size for cbom extension if available */
> > > - ret = of_property_read_u32(node, "riscv,cbom-block-size", &val);
> > > - if (ret)
> > > - continue;
> > > -
> > > - if (!probed_block_size) {
> > > - probed_block_size = val;
> > > - cbom_hartid = hartid;
> > > - } else {
> > > - if (probed_block_size != val)
> > > - pr_warn("cbom-block-size mismatched between harts %lu and %lu\n",
> > > - cbom_hartid, hartid);
> > > - }
> > > - }
> > > -
> > > - if (probed_block_size)
> > > - riscv_cbom_block_size = probed_block_size;
> > > -}
> > > -#endif
> > > -
> > > void riscv_noncoherent_supported(void)
> > > {
> > > WARN(!riscv_cbom_block_size,
> > > --
> > > 2.37.3
> > >
> > >
> > > _______________________________________________
> > > linux-riscv mailing list
> > > linux-riscv at lists.infradead.org
> > > http://lists.infradead.org/mailman/listinfo/linux-riscv
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv
More information about the linux-riscv
mailing list