[PATCH v1 00/30] Basic StarFive JH7110 RISC-V SoC support
Emil Renner Berthing
emil.renner.berthing at canonical.com
Wed Oct 5 06:05:45 PDT 2022
On Thu, 29 Sept 2022 at 16:34, Hal Feng <hal.feng at linux.starfivetech.com> wrote:
> This series adds basic support for the StarFive JH7110 RISC-V SoC to
> boot up and get a serial console. This series includes basic clock,
> reset, pinctrl and uart drivers, which are necessary for booting.
> It's should be noted that the reset and clock driver codes of JH7110
> are partly common with those of JH7100, so the common codes are
> factored out and can be reused by drivers of JH7110 and other more
> SoCs from StarFive.
>
> The JH7110 is the upgraded version of JH7100 and also the first official
> released version of JH71XX series SoCs from StarFive Technology Ltd.
> The VisionFive 2 boards equipped with JH7110 SoCs are launched
> recently [1]. More information and support can visit RVspace wiki [2].
>
> This series is also available at
> https://github.com/hal-feng/linux/commits/visionfive2-minimal
>
> [1] https://www.cnx-software.com/2022/08/23/starfive-visionfive-2-quad-core-risc-v-sbc-linux/
> [2] https://wiki.rvspace.org/
Hi Hal,
Firstly thanks for working on this! And sorry about the late reply. On
the next version could you please cc
emil.renner.berthing at canonical.com since it seems to handle the
mailing list a bit better.
I see you've changed the clock/reset and pinctrl quite a bit, so I'll
comment on that separately.
/Emil
> Emil Renner Berthing (17):
> dt-bindings: riscv: Add StarFive JH7110 bindings
> dt-bindings: timer: Add StarFive JH7110 clint
> dt-bindings: interrupt-controller: Add StarFive JH7110 plic
> dt-bindings: sifive-l2-cache: Support StarFive JH71x0 SoCs
> soc: sifive: l2 cache: Convert to platform driver
> soc: sifive: l2 cache: Add StarFive JH71x0 support
> reset: starfive: jh7100: Use 32bit I/O on 32bit registers
> dt-bindings: reset: Add StarFive JH7110 reset definitions
> clk: starfive: Factor out common clock driver code
> dt-bindings: clock: Add StarFive JH7110 system clock definitions
> dt-bindings: clock: Add starfive,jh7110-clkgen-sys bindings
> clk: starfive: Add StarFive JH7110 system clock driver
> dt-bindings: clock: Add StarFive JH7110 always-on definitions
> dt-bindings: clock: Add starfive,jh7110-clkgen-aon bindings
> clk: starfive: Add StarFive JH7110 always-on clock driver
> RISC-V: Add initial StarFive JH7110 device tree
> RISC-V: Add StarFive JH7110 VisionFive2 board device tree
>
> Hal Feng (8):
> reset: starfive: jh7100: Use regmap APIs to operate registers
> reset: starfive: jh7100: Move necessary properties to device tree
> reset: starfive: Rename 'reset-starfive-jh7100.c' to
> 'reset-starfive.c'
> dt-bindings: reset: Add starfive,jh7110-reset bindings
> reset: starfive: Add StarFive JH7110 SoC support
> clk: starfive: Use regmap APIs to operate registers
> RISC-V: defconfig: Enable CONFIG_SERIAL_8250_DW
> RISC-V: Add StarFive JH7100 and JH7110 SoC Kconfig options
>
> Jianlong Huang (5):
> pinctrl: Create subdirectory for StarFive drivers
> pinctrl: starfive: Rename "pinctrl-starfive" to
> "pinctrl-starfive-jh7100"
> dt-bindings: pinctrl: Add StarFive JH7110 pinctrl definitions
> dt-bindings: pinctrl: Add StarFive JH7110 pinctrl bindings
> pinctrl: starfive: Add StarFive JH7110 driver
>
> .../clock/starfive,jh7110-clkgen-aon.yaml | 62 ++
> .../clock/starfive,jh7110-clkgen-sys.yaml | 69 ++
> .../sifive,plic-1.0.0.yaml | 1 +
> .../pinctrl/starfive,jh7100-pinctrl.yaml | 2 +-
> .../pinctrl/starfive,jh7110-pinctrl.yaml | 202 ++++
> .../bindings/reset/starfive,jh7100-reset.yaml | 20 +
> .../bindings/reset/starfive,jh7110-reset.yaml | 54 +
> .../bindings/riscv/sifive-l2-cache.yaml | 4 +
> .../devicetree/bindings/riscv/starfive.yaml | 3 +
> .../bindings/timer/sifive,clint.yaml | 1 +
> MAINTAINERS | 27 +-
> arch/riscv/Kconfig.socs | 28 +-
> arch/riscv/boot/dts/starfive/Makefile | 3 +-
> .../dts/starfive/jh7100-beaglev-starlight.dts | 2 +-
> arch/riscv/boot/dts/starfive/jh7100.dtsi | 3 +
> .../jh7110-starfive-visionfive-v2.dts | 91 ++
> arch/riscv/boot/dts/starfive/jh7110.dtsi | 449 +++++++++
> arch/riscv/configs/defconfig | 1 +
> drivers/clk/starfive/Kconfig | 29 +-
> drivers/clk/starfive/Makefile | 6 +-
> .../clk/starfive/clk-starfive-jh7100-audio.c | 138 +--
> drivers/clk/starfive/clk-starfive-jh7100.c | 836 +++++-----------
> drivers/clk/starfive/clk-starfive-jh7100.h | 112 ---
> .../clk/starfive/clk-starfive-jh7110-aon.c | 161 +++
> .../clk/starfive/clk-starfive-jh7110-sys.c | 648 ++++++++++++
> drivers/clk/starfive/clk-starfive.c | 349 +++++++
> drivers/clk/starfive/clk-starfive.h | 112 +++
> drivers/pinctrl/Kconfig | 18 +-
> drivers/pinctrl/Makefile | 2 +-
> drivers/pinctrl/starfive/Kconfig | 37 +
> drivers/pinctrl/starfive/Makefile | 8 +
> drivers/pinctrl/starfive/pinctrl-jh7110-aon.c | 718 ++++++++++++++
> drivers/pinctrl/starfive/pinctrl-jh7110-sys.c | 925 +++++++++++++++++
> .../pinctrl-starfive-jh7100.c} | 10 +-
> drivers/pinctrl/starfive/pinctrl-starfive.c | 539 ++++++++++
> drivers/pinctrl/starfive/pinctrl-starfive.h | 131 +++
> drivers/reset/Kconfig | 7 +-
> drivers/reset/Makefile | 2 +-
> drivers/reset/reset-starfive-jh7100.c | 173 ----
> drivers/reset/reset-starfive.c | 218 ++++
> drivers/soc/Makefile | 2 +-
> drivers/soc/sifive/Kconfig | 2 +-
> drivers/soc/sifive/sifive_l2_cache.c | 86 +-
> .../dt-bindings/clock/starfive-jh7110-aon.h | 26 +
> .../dt-bindings/clock/starfive-jh7110-sys.h | 215 ++++
> ...l-starfive.h => pinctrl-starfive-jh7100.h} | 6 +-
> .../pinctrl/pinctrl-starfive-jh7110.h | 931 ++++++++++++++++++
> include/dt-bindings/reset/starfive-jh7110.h | 154 +++
> 48 files changed, 6604 insertions(+), 1019 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/clock/starfive,jh7110-clkgen-aon.yaml
> create mode 100644 Documentation/devicetree/bindings/clock/starfive,jh7110-clkgen-sys.yaml
> create mode 100644 Documentation/devicetree/bindings/pinctrl/starfive,jh7110-pinctrl.yaml
> create mode 100644 Documentation/devicetree/bindings/reset/starfive,jh7110-reset.yaml
> create mode 100644 arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-v2.dts
> create mode 100644 arch/riscv/boot/dts/starfive/jh7110.dtsi
> delete mode 100644 drivers/clk/starfive/clk-starfive-jh7100.h
> create mode 100644 drivers/clk/starfive/clk-starfive-jh7110-aon.c
> create mode 100644 drivers/clk/starfive/clk-starfive-jh7110-sys.c
> create mode 100644 drivers/clk/starfive/clk-starfive.c
> create mode 100644 drivers/clk/starfive/clk-starfive.h
> create mode 100644 drivers/pinctrl/starfive/Kconfig
> create mode 100644 drivers/pinctrl/starfive/Makefile
> create mode 100644 drivers/pinctrl/starfive/pinctrl-jh7110-aon.c
> create mode 100644 drivers/pinctrl/starfive/pinctrl-jh7110-sys.c
> rename drivers/pinctrl/{pinctrl-starfive.c => starfive/pinctrl-starfive-jh7100.c} (99%)
> create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive.c
> create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive.h
> delete mode 100644 drivers/reset/reset-starfive-jh7100.c
> create mode 100644 drivers/reset/reset-starfive.c
> create mode 100644 include/dt-bindings/clock/starfive-jh7110-aon.h
> create mode 100644 include/dt-bindings/clock/starfive-jh7110-sys.h
> rename include/dt-bindings/pinctrl/{pinctrl-starfive.h => pinctrl-starfive-jh7100.h} (98%)
> create mode 100644 include/dt-bindings/pinctrl/pinctrl-starfive-jh7110.h
> create mode 100644 include/dt-bindings/reset/starfive-jh7110.h
>
> --
> 2.17.1
>
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv
More information about the linux-riscv
mailing list