[PATCH v3 0/3] Enable initial support for StarFive VisionFive V1 SBC

[Cristian Ciocaltea]

Please let me know if there is anything else missing in order to get 
this queued for merging.

Thanks,
Cristian

On 9/8/22 17:29, Cristian Ciocaltea wrote:
> The StarFive VisionFive V1 SBC [1] is similar with the already supported
> BeagleV Starlight Beta board, both being based on the StarFive JH7100 SoC.
> 
> In addition to documenting the necessary compatibles, this patch series
> moves most of the content from jh7100-beaglev-starlight.dts to a new file
> jh7100-common.dtsi, to be shared between the two boards.
> 
> No other changes are required in order to successfully boot the board.
> 
> [1] https://github.com/starfive-tech/VisionFive
> 
> Changes in v3:
>   - Added Reviewed-by tag from Krzysztof in patch 1/3
>   - Optimized patch 2/3 by enabling copy detection on "git format-patch",
>     as indicated by Krzysztof
> 
> Changes in v2:
>   - Simplified documentation by using 'enum' instead of 'const' in
>     patch 1/3, according to Conor's review
>   - Added Reviewed-by tags from Conor
> 
> Cristian Ciocaltea (3):
>    dt-bindings: riscv: starfive: Add StarFive VisionFive V1 board
>    riscv: dts: starfive: Add common DT for JH7100 based boards
>    riscv: dts: starfive: Add StarFive VisionFive V1 device tree
> 
>   .../devicetree/bindings/riscv/starfive.yaml   |   4 +-
>   arch/riscv/boot/dts/starfive/Makefile         |   2 +-
>   .../dts/starfive/jh7100-beaglev-starlight.dts | 153 +-----------------
>   ...aglev-starlight.dts => jh7100-common.dtsi} |   3 -
>   .../jh7100-starfive-visionfive-v1.dts         |  20 +++
>   5 files changed, 25 insertions(+), 157 deletions(-)
>   copy arch/riscv/boot/dts/starfive/{jh7100-beaglev-starlight.dts => jh7100-common.dtsi} (96%)
>   create mode 100644 arch/riscv/boot/dts/starfive/jh7100-starfive-visionfive-v1.dts
>