[PATCH V4 6/7] riscv: ftrace: Add DYNAMIC_FTRACE_WITH_DIRECT_CALLS support

Song Shuai suagrfillet at gmail.com
Tue Nov 29 04:03:02 PST 2022


<guoren at kernel.org> 于2022年11月29日周二 03:33写道:
>
> From: Song Shuai <suagrfillet at gmail.com>
>
> This patch adds DYNAMIC_FTRACE_WITH_DIRECT_CALLS support for RISC-V.
>
> select the DYNAMIC_FTRACE_WITH_DIRECT_CALLS to provide the
> register_ftrace_direct[_multi] interfaces allowing users to register
> the customed trampoline (direct_caller) as the mcount for one or
> more target functions. And modify_ftrace_direct[_multi] are also
> provided for modifying direct_caller.
>
> To make the direct_caller and the other ftrace hooks (eg. function/fgraph
> tracer, k[ret]probes) co-exist, a temporary register is nominated to
> store the address of direct_caller in ftrace_regs_caller. After the
> setting of the address direct_caller by direct_ops->func and the
> RESTORE_REGS in ftrace_regs_caller, direct_caller will be jumped to
> by the `jr` inst.
>
> Signed-off-by: Song Shuai <suagrfillet at gmail.com>
> Tested-by: Guo Ren <guoren at kernel.org>
> Signed-off-by: Guo Ren <guoren at kernel.org>
> ---
>  arch/riscv/Kconfig              | 1 +
>  arch/riscv/include/asm/ftrace.h | 6 ++++++
>  arch/riscv/kernel/mcount-dyn.S  | 4 ++++
>  3 files changed, 11 insertions(+)
>
> diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> index 1d0e5838b11b..2828537abfcd 100644
> --- a/arch/riscv/Kconfig
> +++ b/arch/riscv/Kconfig
> @@ -278,6 +278,7 @@ config ARCH_RV64I
>         select ARCH_SUPPORTS_INT128 if CC_HAS_INT128
>         select HAVE_DYNAMIC_FTRACE if !XIP_KERNEL && MMU && $(cc-option,-fpatchable-function-entry=8)
I noticed this cc-option uses the '-fpatchable-function-entry=8' to
judge if the compiler supports this option.
Should we keep up with the CC_FLAGS_FTRACE modified in ("riscv:
ftrace: Reduce the detour code size to half"),
or follow the parisc architecture to set the value as '1,1' in the
case of the CC_FLAGS_FTRACE is not constant.
```
./arch/parisc/Makefile:75:CC_FLAGS_FTRACE :=
-fpatchable-function-entry=$(NOP_COUNT),$(shell echo
$$(($(NOP_COUNT)-1)))
./arch/parisc/Kconfig:70:       select HAVE_DYNAMIC_FTRACE if
$(cc-option,-fpatchable-function-entry=1,1)
```
>         select HAVE_DYNAMIC_FTRACE_WITH_REGS if HAVE_DYNAMIC_FTRACE
> +       select HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
>         select HAVE_FTRACE_MCOUNT_RECORD if !XIP_KERNEL
>         select HAVE_FUNCTION_GRAPH_TRACER
>         select HAVE_FUNCTION_TRACER if !XIP_KERNEL && !PREEMPTION
> diff --git a/arch/riscv/include/asm/ftrace.h b/arch/riscv/include/asm/ftrace.h
> index 84f856a3286e..4539f10fea56 100644
> --- a/arch/riscv/include/asm/ftrace.h
> +++ b/arch/riscv/include/asm/ftrace.h
> @@ -114,6 +114,12 @@ struct ftrace_regs;
>  void ftrace_graph_func(unsigned long ip, unsigned long parent_ip,
>                        struct ftrace_ops *op, struct ftrace_regs *fregs);
>  #define ftrace_graph_func ftrace_graph_func
> +
> +static inline void arch_ftrace_set_direct_caller(struct pt_regs *regs, unsigned long addr)
> +{
> +               regs->t1 = addr;
> +}
> +
>  #endif /* CONFIG_DYNAMIC_FTRACE_WITH_REGS */
>
>  #endif /* __ASSEMBLY__ */
> diff --git a/arch/riscv/kernel/mcount-dyn.S b/arch/riscv/kernel/mcount-dyn.S
> index 466c6ef217b1..fef7c460f991 100644
> --- a/arch/riscv/kernel/mcount-dyn.S
> +++ b/arch/riscv/kernel/mcount-dyn.S
> @@ -232,6 +232,7 @@ ENDPROC(ftrace_caller)
>
>  #else /* CONFIG_DYNAMIC_FTRACE_WITH_REGS */
>  ENTRY(ftrace_regs_caller)
> +       move    t1, zero
>         SAVE_ABI_REGS 1
>         PREPARE_ARGS
>
> @@ -241,7 +242,10 @@ ftrace_regs_call:
>
>
>         RESTORE_ABI_REGS 1
> +       bnez    t1,.Ldirect
>         jr t0
> +.Ldirect:
> +       jr t1
>  ENDPROC(ftrace_regs_caller)
>
>  ENTRY(ftrace_caller)
> --
> 2.36.1
>


-- 
Thanks,
Song



More information about the linux-riscv mailing list