[PATCH] riscv: head: use 0 as the default text_offset

Samuel Holland samuel at sholland.org
Mon Nov 28 22:55:24 PST 2022


On 11/29/22 00:19, Palmer Dabbelt wrote:
> On Mon, 28 Nov 2022 21:04:48 PST (-0800), samuel at sholland.org wrote:
>> On 11/28/22 14:11, Atish Kumar Patra wrote:
>>> On Mon, Nov 28, 2022 at 7:34 AM Jisheng Zhang <jszhang at kernel.org>
>>> wrote:
>>>>
>>>> Commit 0f327f2aaad6 ("RISC-V: Add an Image header that boot loader can
>>>> parse.") adds an image header which "is based on ARM64 boot image
>>>> header and provides an opportunity to combine both ARM64 & RISC-V
>>>> image headers in future.". At that time, arm64's default text_offset
>>>> is 0x80000, this is to give "512 KB of guaranteed BSS space to put
>>>> the swapper page tables" as commit cfa7ede20f13 ("arm64: set
>>>> TEXT_OFFSET
>>>> to 0x0 in preparation for removing it entirely") pointed out, but
>>>> riscv doesn't need the space, so use 0 as the default text_offset.
>>>>
>>>> Before this patch, booting linux kernel on Sipeed bl808 M1s Dock
>>>> with u-boot booti cmd:
>>>> [    0.000000] OF: fdt: Ignoring memory range 0x50000000 - 0x50200000
>>>> ...
>>>> [    0.000000]   DMA32    [mem 0x0000000050200000-0x0000000053ffffff]
>>>> As can be seen, 2MB DDR(0x50000000 - 0x501fffff) can't be used by
>>>> linux.
>>>>
>>>> After this patch, the 64MB DDR is fully usable by linux
>>>> [    0.000000]   DMA32    [mem 0x0000000050000000-0x0000000053ffffff]
>>>>
>>>> Signed-off-by: Jisheng Zhang <jszhang at kernel.org>
>>>> ---
>>>>  arch/riscv/kernel/head.S | 12 +-----------
>>>>  1 file changed, 1 insertion(+), 11 deletions(-)
>>>>
>>>> diff --git a/arch/riscv/kernel/head.S b/arch/riscv/kernel/head.S
>>>> index b865046e4dbb..ef95943f7a70 100644
>>>> --- a/arch/riscv/kernel/head.S
>>>> +++ b/arch/riscv/kernel/head.S
>>>> @@ -38,18 +38,8 @@ ENTRY(_start)
>>>>         .word 0
>>>>  #endif
>>>>         .balign 8
>>>> -#ifdef CONFIG_RISCV_M_MODE
>>>> -       /* Image load offset (0MB) from start of RAM for M-mode */
>>>> +       /* Image load offset (0MB) from start of RAM */
>>>>         .dword 0
>>>> -#else
>>>> -#if __riscv_xlen == 64
>>>> -       /* Image load offset(2MB) from start of RAM */
>>>> -       .dword 0x200000
>>>> -#else
>>>> -       /* Image load offset(4MB) from start of RAM */
>>>> -       .dword 0x400000
>>>> -#endif
>>>> -#endif
>>>
>>> NACK.
>>> RV64 needs to boot at a 2MB aligned address and RV32 needs to boot at
>>> a 4MB aligned address.
>>> The firmware is assumed to live at the start of DRAM for Linux running
>>> in S-mode.
>>
>> What needs to happen so we can stop making this assumption? If the SBI
>> implementation wants to reserve memory, it should use the devicetree to
>> do so. OpenSBI already does this.
> 
> IMO we've really screwed up the boot flow on RISC-V.  Having Linux
> reserve space for the firmware is just all backwards, Linux can't know
> how much memory the firmware needs (which manifests under large hart
> counts in OpenSBI, for example).  Unfortunately there's no specification
> that defines these platform-level details, so we're stuck depending on 
> unspecified behavior like this.
> 
> I think we could fix this by either making Linux's early boot relocation
> code work sanely (fix whatever bugs are there, document what can't be
> fixed, and then add some sort of Image flag to tell firmware the kernel
> can be relocated) or relying on relocatable firmware, but both of those
> come with some costs ...

It sounds like Alexandre's patch[1] lets us use memory below this
offset, so we don't have to relocate the kernel to the beginning of RAM.
In fact, we could even increase the offset if we are concerned about the
kernel link address conflicting with the SBI implementation.

[1]:
https://patchwork.kernel.org/project/linux-riscv/patch/20221122084141.1849421-1-alexghiti@rivosinc.com/

>> Throwing away 2 MiB of RAM is quite wasteful considering we have
>> multiple SoCs (D1s, BL808) that are limited to 64 MiB of in-package RAM.
> 
> ... and I'd argue that users on systems don't want to pay those costs. 

What does fixing the early relocation code cost? Just longer boot time?
If the bootloader takes care of avoiding reserved-memory regions, and
Linux can run from wherever it gets loaded, that would be ideal to me.

> In fact, I'd argue that systems like that don't want resident firmware
> at all.

I would much rather pay 256 KiB for resident firmware than reimplement
all of the power management and PMU logic in Linux. It's not as bad as
losing 2 MiB when I know most of that is unused.

> So let's just add a CONFIG_SBI=n, and then just use direct drivers for
> everything.  If the firmware doesn't need to be resident then it's
> pretty straight-forward to support these 0 offsets, so we can just add
> that as another Kconfig.  Sure this will trip up firmware that depends
> on these fixed reservations, but saying "the resident firmware fits in 0
> superpages" is just as much of a platform-specific dependency as saying
> "the resident firmware fits in 1 superpage".  If firmware can't handle
> this field in the Image format then we're going to end up with breakages
> at some point, it might as well be now.
>
> If these systems don't have all the ISA bits necessary to avoid M-mode
> entirely then we can just implement a tiny M-mode stub in Linux that
> gets left around during early boot and then shims stuff to S-mode. 
> That'll be a bit of a headache and with some extensions it can be
> avoided, the standard stuff won't allow for that until the latest round
> of specs is done but if it's possible via whatever custom extensions are
> in these things then that's probably the way to go.

I don't think Linux has a choice here, when started in S-mode. And
neither does the bootloader parsing the Image, because it most likely
runs in S-mode as well.

And when started in M-mode, we already don't use SBI.

Regards,
Samuel




More information about the linux-riscv mailing list