[PATCH] riscv: head: use 0 as the default text_offset

[Samuel Holland]

On 11/28/22 14:11, Atish Kumar Patra wrote:
> On Mon, Nov 28, 2022 at 7:34 AM Jisheng Zhang <jszhang at kernel.org> wrote:
>>
>> Commit 0f327f2aaad6 ("RISC-V: Add an Image header that boot loader can
>> parse.") adds an image header which "is based on ARM64 boot image
>> header and provides an opportunity to combine both ARM64 & RISC-V
>> image headers in future.". At that time, arm64's default text_offset
>> is 0x80000, this is to give "512 KB of guaranteed BSS space to put
>> the swapper page tables" as commit cfa7ede20f13 ("arm64: set TEXT_OFFSET
>> to 0x0 in preparation for removing it entirely") pointed out, but
>> riscv doesn't need the space, so use 0 as the default text_offset.
>>
>> Before this patch, booting linux kernel on Sipeed bl808 M1s Dock
>> with u-boot booti cmd:
>> [    0.000000] OF: fdt: Ignoring memory range 0x50000000 - 0x50200000
>> ...
>> [    0.000000]   DMA32    [mem 0x0000000050200000-0x0000000053ffffff]
>> As can be seen, 2MB DDR(0x50000000 - 0x501fffff) can't be used by
>> linux.
>>
>> After this patch, the 64MB DDR is fully usable by linux
>> [    0.000000]   DMA32    [mem 0x0000000050000000-0x0000000053ffffff]
>>
>> Signed-off-by: Jisheng Zhang <jszhang at kernel.org>
>> ---
>>  arch/riscv/kernel/head.S | 12 +-----------
>>  1 file changed, 1 insertion(+), 11 deletions(-)
>>
>> diff --git a/arch/riscv/kernel/head.S b/arch/riscv/kernel/head.S
>> index b865046e4dbb..ef95943f7a70 100644
>> --- a/arch/riscv/kernel/head.S
>> +++ b/arch/riscv/kernel/head.S
>> @@ -38,18 +38,8 @@ ENTRY(_start)
>>         .word 0
>>  #endif
>>         .balign 8
>> -#ifdef CONFIG_RISCV_M_MODE
>> -       /* Image load offset (0MB) from start of RAM for M-mode */
>> +       /* Image load offset (0MB) from start of RAM */
>>         .dword 0
>> -#else
>> -#if __riscv_xlen == 64
>> -       /* Image load offset(2MB) from start of RAM */
>> -       .dword 0x200000
>> -#else
>> -       /* Image load offset(4MB) from start of RAM */
>> -       .dword 0x400000
>> -#endif
>> -#endif
> 
> NACK.
> RV64 needs to boot at a 2MB aligned address and RV32 needs to boot at
> a 4MB aligned address.
> The firmware is assumed to live at the start of DRAM for Linux running
> in S-mode.

What needs to happen so we can stop making this assumption? If the SBI
implementation wants to reserve memory, it should use the devicetree to
do so. OpenSBI already does this.

Throwing away 2 MiB of RAM is quite wasteful considering we have
multiple SoCs (D1s, BL808) that are limited to 64 MiB of in-package RAM.

Regards,
Samuel