[PATCH v2 1/8] dt-bindings: riscv: Add StarFive JH7110 SoC and VisionFive2 board

Hal Feng hal.feng at starfivetech.com
Thu Nov 24 01:50:13 PST 2022


On Thu, 24 Nov 2022 10:20:32 +0100, Emil Renner Berthing wrote:
> On Thu, 24 Nov 2022 at 06:56, Hal Feng <hal.feng at starfivetech.com> wrote:
> >
> > On Sat, 19 Nov 2022 01:28:48 +0800, Emil Renner Berthing wrote:
> > > On Fri, 18 Nov 2022 at 02:17, Hal Feng <hal.feng at starfivetech.com> wrote:
> > > >
> > > > From: Emil Renner Berthing <kernel at esmil.dk>
> > > >
> > > > Add device tree bindings for the StarFive JH7110 RISC-V SoC [1]
> > > > and the VisionFive2 board [2] equipped with it.
> > > >
> > > > [1]: https://doc-en.rvspace.org/Doc_Center/jh7110.html
> > > > [2]: https://doc-en.rvspace.org/Doc_Center/visionfive_2.html
> > > >
> > > > Signed-off-by: Emil Renner Berthing <kernel at esmil.dk>
> > > > Signed-off-by: Hal Feng <hal.feng at starfivetech.com>
> > > > ---
> > > >  Documentation/devicetree/bindings/riscv/starfive.yaml | 4 ++++
> > > >  1 file changed, 4 insertions(+)
> > > >
> > > > diff --git a/Documentation/devicetree/bindings/riscv/starfive.yaml b/Documentation/devicetree/bindings/riscv/starfive.yaml
> > > > index 5b36243fd674..64008c57e31f 100644
> > > > --- a/Documentation/devicetree/bindings/riscv/starfive.yaml
> > > > +++ b/Documentation/devicetree/bindings/riscv/starfive.yaml
> > > > @@ -22,6 +22,10 @@ properties:
> > > >            - const: beagle,beaglev-starlight-jh7100-r0
> > > >            - const: starfive,jh7100
> > > >
> > > > +      - items:
> > > > +          - const: starfive,visionfive-v2
> > >
> > > I think StarFive has switched to just calling it VisionFive 2 and not
> > > V2. Please check up on this before committing to the compatible
> > > string.
> > >
> > > Also there are going to be different revisions of the VisionFive 2
> > > board, so maybe consider adding eg. starfive,visionfive-2-v1.1 and
> > > starfive,visionfive-2-v1,2b early.
> >
> > I checked that the official name of this board is "VisionFive 2". The
> > board has version A and version B, which are different in gmac and phy
> > chip. The version A board has one 1000M and one 100M Ethernet ports
> > while the version B board has two 1000M Ethernet ports. In dts, they
> > have different configuration parameters for gmac. So I would like to
> > distinguish them by two compatibles as below in the next version.
> >
> >       - items:
> >           - enum:
> >               - starfive,visionfive-2-va
> >               - starfive,visionfive-2-vb
> >           - const: starfive,jh7110
> 
> Cool. Though the silkscreen on my board says "VisionFive 2 V1.2B" so I
> think it would be less confusing if you used that as the model, and
> "starfive,visionfive-2-v1.2b" as the compatible string for the board.

As far as I know, VisionFive 2 V1.3B is coming and all version B boards
use the same configuration. It's unnecessary to add the detailed number
of PCB version.

> 
> 
> > Best regards,
> > Hal
> >
> > >
> > > > +          - const: starfive,jh7110
> > > > +
> > > >  additionalProperties: true
> >




More information about the linux-riscv mailing list