[PATCH v1 4/4] riscv: dts: starfive: add power controller node

Walker Chen walker.chen at starfivetech.com
Fri Nov 18 05:32:16 PST 2022


This adds the power controller node for the Starfive JH7110 SoC.
The pmu needs to be used by other modules such as ISP, VPU, etc.

Signed-off-by: Walker Chen <walker.chen at starfivetech.com>
---
 arch/riscv/boot/dts/starfive/jh7110.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
index c22e8f1d2640..fa7b60b82d71 100644
--- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -356,6 +356,13 @@
 			#gpio-cells = <2>;
 		};
 
+		pwrc: power-controller at 17030000 {
+			compatible = "starfive,jh7110-pmu";
+			reg = <0x0 0x17030000 0x0 0x10000>;
+			interrupts = <111>;
+			#power-domain-cells = <1>;
+		};
+
 		uart0: serial at 10000000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x0 0x10000000 0x0 0x10000>;
-- 
2.17.1




More information about the linux-riscv mailing list