[PATCH 38/44] KVM: Disable CPU hotplug during hardware enabling

Huang, Kai kai.huang at intel.com
Wed Nov 9 17:08:56 PST 2022


On Wed, 2022-11-02 at 23:19 +0000, Sean Christopherson wrote:
> From: Chao Gao <chao.gao at intel.com>
> 
> Disable CPU hotplug during hardware_enable_all() to prevent the corner
> case where if the following sequence occurs:
> 
>   1. A hotplugged CPU marks itself online in cpu_online_mask
>   2. The hotplugged CPU enables interrupt before invoking KVM's ONLINE
>      callback
>   3  hardware_enable_all() is invoked on another CPU right
> 
> the hotplugged CPU will be included in on_each_cpu() and thus get sent
> through hardware_enable_nolock() before kvm_online_cpu() is called.
> 
>         start_secondary { ...
>                 set_cpu_online(smp_processor_id(), true); <- 1
>                 ...
>                 local_irq_enable();  <- 2
>                 ...
>                 cpu_startup_entry(CPUHP_AP_ONLINE_IDLE); <- 3
>         }
> 
> KVM currently fudges around this race by keeping track of which CPUs have
> done hardware enabling (see commit 1b6c016818a5 "KVM: Keep track of which
> cpus have virtualization enabled"), but that's an inefficient, convoluted,
> and hacky solution.
> 
> Signed-off-by: Chao Gao <chao.gao at intel.com>
> [sean: split to separate patch, write changelog]
> Signed-off-by: Sean Christopherson <seanjc at google.com>
> ---
>  arch/x86/kvm/x86.c  |  8 +++++++-
>  virt/kvm/kvm_main.c | 10 ++++++++++
>  2 files changed, 17 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
> index a7b1d916ecb2..a15e54ba0471 100644
> --- a/arch/x86/kvm/x86.c
> +++ b/arch/x86/kvm/x86.c
> @@ -9283,7 +9283,13 @@ static int kvm_x86_check_processor_compatibility(struct kvm_x86_init_ops *ops)
>  	int cpu = smp_processor_id();
>  	struct cpuinfo_x86 *c = &cpu_data(cpu);
>  
> -	WARN_ON(!irqs_disabled());
> +	/*
> +	 * Compatibility checks are done when loading KVM and when enabling
> +	 * hardware, e.g. during CPU hotplug, to ensure all online CPUs are
> +	 * compatible, i.e. KVM should never perform a compatibility check on
> +	 * an offline CPU.
> +	 */
> +	WARN_ON(!irqs_disabled() && cpu_active(cpu));

Comment doesn't match with the code?

"KVM should never perform a compatibility check on on offline CPU" should be
something like:

	WARN_ON(!cpu_online(cpu));

So, should the comment be something like below?

"KVM compatibility check happens before CPU is marked as active".

>  
>  	if (__cr4_reserved_bits(cpu_has, c) !=
>  	    __cr4_reserved_bits(cpu_has, &boot_cpu_data))
> diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
> index fd9e39c85549..4e765ef9f4bd 100644
> --- a/virt/kvm/kvm_main.c
> +++ b/virt/kvm/kvm_main.c
> @@ -5088,6 +5088,15 @@ static int hardware_enable_all(void)
>  {
>  	int r = 0;
>  
> +	/*
> +	 * When onlining a CPU, cpu_online_mask is set before kvm_online_cpu()
> +	 * is called, and so on_each_cpu() between them includes the CPU that
> +	 * is being onlined.  As a result, hardware_enable_nolock() may get
> +	 * invoked before kvm_online_cpu().
> +	 *
> +	 * Disable CPU hotplug to prevent scenarios where KVM sees
> +	 */

The above sentence is broken.

I think below comment Quoted from Isaku's series should be OK?

	/*
	 * During onlining a CPU, cpu_online_mask is set before
kvm_online_cpu()
	 * is called. on_each_cpu() between them includes the CPU. As a result,
	 * hardware_enable_nolock() may get invoked before kvm_online_cpu().
	 * This would enable hardware virtualization on that cpu without
	 * compatibility checks, which can potentially crash system or break
	 * running VMs.
	 *
	 * Disable CPU hotplug to prevent this case from happening.
	 */

> +	cpus_read_lock();
>  	raw_spin_lock(&kvm_count_lock);
>  
>  	kvm_usage_count++;
> @@ -5102,6 +5111,7 @@ static int hardware_enable_all(void)
>  	}
>  
>  	raw_spin_unlock(&kvm_count_lock);
> +	cpus_read_unlock();
>  
>  	return r;
>  }



More information about the linux-riscv mailing list