[PATCH] RISC-V-fixes: relocate DTB if it's outside memory region
Conor.Dooley at microchip.com
Conor.Dooley at microchip.com
Thu Mar 24 02:37:29 PDT 2022
On 22/03/2022 13:28, Nick Kossifidis wrote:
> In case the DTB provided by the bootloader/BootROM is before the kernel
> image or outside /memory, we won't be able to access it through the
> linear mapping, and get a segfault on setup_arch(). Currently OpenSBI
> relocates DTB but that's not always the case (e.g. if FW_JUMP_FDT_ADDR
> is not specified), and it's also not the most portable approach since
> the default FW_JUMP_FDT_ADDR of the generic platform relocates the DTB
> at a specific offset that may not be available. To avoid this situation
> copy DTB so that it's visible through the linear mapping.
>
> Signed-off-by: Nick Kossifidis <mick at ics.forth.gr>
Albeit in a backport, I tested this on a PolarFire SoC based board.
So I guess, Tested-by: Conor Dooley <conor.dooley at microchip.com>
And a lot cleaner than using create_pgd_mapping in setup_vm_final to do it :)
Thanks,
Conor.
> ---
> arch/riscv/mm/init.c | 21 +++++++++++++++++++--
> 1 file changed, 19 insertions(+), 2 deletions(-)
>
> diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
> index 0d588032d..697a9aed4 100644
> --- a/arch/riscv/mm/init.c
> +++ b/arch/riscv/mm/init.c
> @@ -206,8 +206,25 @@ static void __init setup_bootmem(void)
> * early_init_fdt_reserve_self() since __pa() does
> * not work for DTB pointers that are fixmap addresses
> */
> - if (!IS_ENABLED(CONFIG_BUILTIN_DTB))
> - memblock_reserve(dtb_early_pa, fdt_totalsize(dtb_early_va));
> + if (!IS_ENABLED(CONFIG_BUILTIN_DTB)) {
> + /*
> + * In case the DTB is not located in a memory region we won't
> + * be able to locate it later on via the linear mapping and
> + * get a segfault when accessing it via __va(dtb_early_pa).
> + * To avoid this situation copy DTB to a memory region.
> + * Note that memblock_phys_alloc will also reserve DTB region.
> + */
> + if (!memblock_is_memory(dtb_early_pa)) {
> + size_t fdt_size = fdt_totalsize(dtb_early_va);
> + phys_addr_t new_dtb_early_pa = memblock_phys_alloc(fdt_size, PAGE_SIZE);
> + void *new_dtb_early_va = early_memremap(new_dtb_early_pa, fdt_size);
> +
> + memcpy(new_dtb_early_va, dtb_early_va, fdt_size);
> + early_memunmap(new_dtb_early_va, fdt_size);
> + _dtb_early_pa = new_dtb_early_pa;
> + } else
> + memblock_reserve(dtb_early_pa, fdt_totalsize(dtb_early_va));
> + }
>
> early_init_fdt_scan_reserved_mem();
> dma_contiguous_reserve(dma32_phys_limit);
More information about the linux-riscv
mailing list