[PATCH v3 2/2] irqchip/sifive-plic: Disable S-mode IRQs if running in M-mode
Niklas Cassel
Niklas.Cassel at wdc.com
Wed Mar 2 05:15:53 PST 2022
From: Niklas Cassel <niklas.cassel at wdc.com>
When detecting a context for a privilege mode different from the current
running privilege mode, we simply skip to the next context register.
This means that we never clear the S-mode enable bits when running in
M-mode.
On canaan k210, a bunch of S-mode interrupts are enabled by the bootrom.
These S-mode specific interrupts should never trigger, since we never set
the mie.SEIE bit in the parent interrupt controller (riscv-intc).
However, we will be able to see the mip.SEIE bit set as pending.
This isn't a good default when CONFIG_RISCV_M_MODE is set, since in that
case we will never enter a lower privilege mode (e.g. S-mode).
Let's clear the S-mode enable bits when running the kernel in M-mode, such
that we won't have a interrupt pending bit set, which we will never clear.
Signed-off-by: Niklas Cassel <niklas.cassel at wdc.com>
Reviewed-by: Anup Patel <anup at brainfault.org>
---
drivers/irqchip/irq-sifive-plic.c | 24 +++++++++++++++++++-----
1 file changed, 19 insertions(+), 5 deletions(-)
diff --git a/drivers/irqchip/irq-sifive-plic.c b/drivers/irqchip/irq-sifive-plic.c
index fc9da94eb816..bb87e4c3b88e 100644
--- a/drivers/irqchip/irq-sifive-plic.c
+++ b/drivers/irqchip/irq-sifive-plic.c
@@ -81,17 +81,21 @@ static int plic_parent_irq __ro_after_init;
static bool plic_cpuhp_setup_done __ro_after_init;
static DEFINE_PER_CPU(struct plic_handler, plic_handlers);
-static inline void plic_toggle(struct plic_handler *handler,
- int hwirq, int enable)
+static void __plic_toggle(void __iomem *enable_base, int hwirq, int enable)
{
- u32 __iomem *reg = handler->enable_base + (hwirq / 32) * sizeof(u32);
+ u32 __iomem *reg = enable_base + (hwirq / 32) * sizeof(u32);
u32 hwirq_mask = 1 << (hwirq % 32);
- raw_spin_lock(&handler->enable_lock);
if (enable)
writel(readl(reg) | hwirq_mask, reg);
else
writel(readl(reg) & ~hwirq_mask, reg);
+}
+
+static void plic_toggle(struct plic_handler *handler, int hwirq, int enable)
+{
+ raw_spin_lock(&handler->enable_lock);
+ __plic_toggle(handler->enable_base, hwirq, enable);
raw_spin_unlock(&handler->enable_lock);
}
@@ -324,8 +328,18 @@ static int __init plic_init(struct device_node *node,
* Skip contexts other than external interrupts for our
* privilege level.
*/
- if (parent.args[0] != RV_IRQ_EXT)
+ if (parent.args[0] != RV_IRQ_EXT) {
+ /* Disable S-mode enable bits if running in M-mode. */
+ if (IS_ENABLED(CONFIG_RISCV_M_MODE)) {
+ void __iomem *enable_base = priv->regs +
+ CONTEXT_ENABLE_BASE +
+ i * CONTEXT_ENABLE_SIZE;
+
+ for (hwirq = 1; hwirq <= nr_irqs; hwirq++)
+ __plic_toggle(enable_base, hwirq, 0);
+ }
continue;
+ }
hartid = riscv_of_parent_hartid(parent.np);
if (hartid < 0) {
--
2.35.1
More information about the linux-riscv
mailing list