[PATCH] riscv: dts: microchip: hook up the mpfs' l2cache

[Conor Dooley]

From: Conor Dooley <conor.dooley at microchip.com>

The initial PolarFire SoC devicetree must have been forked off from
the fu540 one prior to the addition of l2cache controller support being
added there. When the controller node was added to mpfs.dtsi, it was
not hooked up to the CPUs & thus sysfs reports an incorrect cache
configuration. Hook it up.

Fixes: 0fa6107eca41 ("RISC-V: Initial DTS for Microchip ICICLE board")
Signed-off-by: Conor Dooley <conor.dooley at microchip.com>
---
 arch/riscv/boot/dts/microchip/mpfs.dtsi | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/riscv/boot/dts/microchip/mpfs.dtsi b/arch/riscv/boot/dts/microchip/mpfs.dtsi
index 3095d08453a1..496d3b7642bd 100644
--- a/arch/riscv/boot/dts/microchip/mpfs.dtsi
+++ b/arch/riscv/boot/dts/microchip/mpfs.dtsi
@@ -50,6 +50,7 @@ cpu1: cpu at 1 {
 			riscv,isa = "rv64imafdc";
 			clocks = <&clkcfg CLK_CPU>;
 			tlb-split;
+			next-level-cache = <&cctrllr>;
 			status = "okay";
 
 			cpu1_intc: interrupt-controller {
@@ -77,6 +78,7 @@ cpu2: cpu at 2 {
 			riscv,isa = "rv64imafdc";
 			clocks = <&clkcfg CLK_CPU>;
 			tlb-split;
+			next-level-cache = <&cctrllr>;
 			status = "okay";
 
 			cpu2_intc: interrupt-controller {
@@ -104,6 +106,7 @@ cpu3: cpu at 3 {
 			riscv,isa = "rv64imafdc";
 			clocks = <&clkcfg CLK_CPU>;
 			tlb-split;
+			next-level-cache = <&cctrllr>;
 			status = "okay";
 
 			cpu3_intc: interrupt-controller {
@@ -131,6 +134,7 @@ cpu4: cpu at 4 {
 			riscv,isa = "rv64imafdc";
 			clocks = <&clkcfg CLK_CPU>;
 			tlb-split;
+			next-level-cache = <&cctrllr>;
 			status = "okay";
 			cpu4_intc: interrupt-controller {
 				#interrupt-cells = <1>;
-- 
2.36.1