[PATCH v3 15/15] riscv: dts: canaan: build all devicetress if SOC_CANAAN

[Conor Dooley]

From: Conor Dooley <conor.dooley at microchip.com>

Testing & checking the Canaan devicetrees is inconvenient as only the
devicetree corresponding to SOC_CANAAN_K210_DTB_BUILTIN will be built.
Change the Makefile so that all devicetrees are built by default if
SOC_CANAAN but only the one specified by SOC_CANAAN_K210_DTB_BUILTIN
gets built as an object.

Signed-off-by: Conor Dooley <conor.dooley at microchip.com>
---
 arch/riscv/boot/dts/canaan/Makefile | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/arch/riscv/boot/dts/canaan/Makefile b/arch/riscv/boot/dts/canaan/Makefile
index c61b08ac8554..befe4eb7527b 100644
--- a/arch/riscv/boot/dts/canaan/Makefile
+++ b/arch/riscv/boot/dts/canaan/Makefile
@@ -1,3 +1,9 @@
 # SPDX-License-Identifier: GPL-2.0
-dtb-$(CONFIG_SOC_CANAAN_K210_DTB_BUILTIN) += $(addsuffix .dtb, $(CONFIG_SOC_CANAAN_K210_DTB_SOURCE))
-obj-$(CONFIG_SOC_CANAAN_K210_DTB_BUILTIN) += $(addsuffix .o, $(dtb-y))
+dtb-$(CONFIG_SOC_CANAAN) += canaan_kd233.dtb
+dtb-$(CONFIG_SOC_CANAAN) += k210_generic.dtb
+dtb-$(CONFIG_SOC_CANAAN) += sipeed_maix_bit.dtb
+dtb-$(CONFIG_SOC_CANAAN) += sipeed_maix_dock.dtb
+dtb-$(CONFIG_SOC_CANAAN) += sipeed_maix_go.dtb
+dtb-$(CONFIG_SOC_CANAAN) += sipeed_maixduino.dtb
+
+obj-$(CONFIG_SOC_CANAAN_K210_DTB_BUILTIN) += $(addsuffix .dtb.o, $(CONFIG_SOC_CANAAN_K210_DTB_SOURCE))
-- 
2.36.1