[PATCH v3 08/15] riscv: dts: canaan: fix the k210's timer nodes
Conor Dooley
mail at conchuod.ie
Wed Jun 29 11:43:37 PDT 2022
From: Conor Dooley <conor.dooley at microchip.com>
The timers on the k210 have non standard interrupt configurations,
which leads to dtbs_check warnings:
k210_generic.dtb: timer at 502d0000: interrupts: [[14], [15]] is too long
>From schema: Documentation/devicetree/bindings/timer/snps,dw-apb-timer.yaml
Split the timer nodes in two, so that the second timer in the IP block
can actually be accessed & in the process solve the dtbs_check warning.
Signed-off-by: Conor Dooley <conor.dooley at microchip.com>
---
arch/riscv/boot/dts/canaan/k210.dtsi | 46 +++++++++++++++++++++++-----
1 file changed, 38 insertions(+), 8 deletions(-)
diff --git a/arch/riscv/boot/dts/canaan/k210.dtsi b/arch/riscv/boot/dts/canaan/k210.dtsi
index cd4eae82d8b2..72f70128d751 100644
--- a/arch/riscv/boot/dts/canaan/k210.dtsi
+++ b/arch/riscv/boot/dts/canaan/k210.dtsi
@@ -319,28 +319,58 @@ fpioa: pinmux at 502b0000 {
timer0: timer at 502d0000 {
compatible = "snps,dw-apb-timer";
- reg = <0x502D0000 0x100>;
- interrupts = <14>, <15>;
+ reg = <0x502D0000 0x14>;
+ interrupts = <14>;
clocks = <&sysclk K210_CLK_TIMER0>,
<&sysclk K210_CLK_APB0>;
clock-names = "timer", "pclk";
resets = <&sysrst K210_RST_TIMER0>;
};
- timer1: timer at 502e0000 {
+ timer1: timer at 502d0014 {
compatible = "snps,dw-apb-timer";
- reg = <0x502E0000 0x100>;
- interrupts = <16>, <17>;
+ reg = <0x502D0014 0x14>;
+ interrupts = <15>;
+ clocks = <&sysclk K210_CLK_TIMER0>,
+ <&sysclk K210_CLK_APB0>;
+ clock-names = "timer", "pclk";
+ resets = <&sysrst K210_RST_TIMER0>;
+ };
+
+ timer2: timer at 502e0000 {
+ compatible = "snps,dw-apb-timer";
+ reg = <0x502E0000 0x14>;
+ interrupts = <16>;
clocks = <&sysclk K210_CLK_TIMER1>,
<&sysclk K210_CLK_APB0>;
clock-names = "timer", "pclk";
resets = <&sysrst K210_RST_TIMER1>;
};
- timer2: timer at 502f0000 {
+ timer3: timer at 502e0014 {
+ compatible = "snps,dw-apb-timer";
+ reg = <0x502E0014 0x114>;
+ interrupts = <17>;
+ clocks = <&sysclk K210_CLK_TIMER1>,
+ <&sysclk K210_CLK_APB0>;
+ clock-names = "timer", "pclk";
+ resets = <&sysrst K210_RST_TIMER1>;
+ };
+
+ timer4: timer at 502f0000 {
+ compatible = "snps,dw-apb-timer";
+ reg = <0x502F0000 0x14>;
+ interrupts = <18>;
+ clocks = <&sysclk K210_CLK_TIMER2>,
+ <&sysclk K210_CLK_APB0>;
+ clock-names = "timer", "pclk";
+ resets = <&sysrst K210_RST_TIMER2>;
+ };
+
+ timer5: timer at 502f0014 {
compatible = "snps,dw-apb-timer";
- reg = <0x502F0000 0x100>;
- interrupts = <18>, <19>;
+ reg = <0x502F0014 0x14>;
+ interrupts = <19>;
clocks = <&sysclk K210_CLK_TIMER2>,
<&sysclk K210_CLK_APB0>;
clock-names = "timer", "pclk";
--
2.36.1
More information about the linux-riscv
mailing list