[PATCH v2 03/16] ASoC: dt-bindings: convert designware-i2s to dt-schema

[Conor Dooley]

From: Conor Dooley <conor.dooley at microchip.com>

Convert the Synopsys DesignWare I2S controller binding to dt-schema.
There was no listed maintainer but Jose Abreu was the last editor of the
txt binding so add him as maintainer.

Signed-off-by: Conor Dooley <conor.dooley at microchip.com>
---
 .../bindings/sound/designware-i2s.txt         | 35 -------
 .../bindings/sound/snps,designware-i2s.yaml   | 93 +++++++++++++++++++
 2 files changed, 93 insertions(+), 35 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/sound/designware-i2s.txt
 create mode 100644 Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml

diff --git a/Documentation/devicetree/bindings/sound/designware-i2s.txt b/Documentation/devicetree/bindings/sound/designware-i2s.txt
deleted file mode 100644
index 6a536d570e29..000000000000
--- a/Documentation/devicetree/bindings/sound/designware-i2s.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-DesignWare I2S controller
-
-Required properties:
- - compatible : Must be "snps,designware-i2s"
- - reg : Must contain the I2S core's registers location and length
- - clocks : Pairs of phandle and specifier referencing the controller's
-   clocks. The controller expects one clock: the clock used as the sampling
-   rate reference clock sample.
- - clock-names : "i2sclk" for the sample rate reference clock.
- - dmas: Pairs of phandle and specifier for the DMA channels that are used by
-   the core. The core expects one or two dma channels: one for transmit and
-   one for receive.
- - dma-names : "tx" for the transmit channel, "rx" for the receive channel.
-
-Optional properties:
- - interrupts: The interrupt line number for the I2S controller. Add this
-   parameter if the I2S controller that you are using does not support DMA.
-
-For more details on the 'dma', 'dma-names', 'clock' and 'clock-names'
-properties please check:
-	* resource-names.txt
-	* clock/clock-bindings.txt
-	* dma/dma.txt
-
-Example:
-
-	soc_i2s: i2s at 7ff90000 {
-		compatible = "snps,designware-i2s";
-		reg = <0x0 0x7ff90000 0x0 0x1000>;
-		clocks = <&scpi_i2sclk 0>;
-		clock-names = "i2sclk";
-		#sound-dai-cells = <0>;
-		dmas = <&dma0 5>;
-		dma-names = "tx";
-	};
diff --git a/Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml b/Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml
new file mode 100644
index 000000000000..5ac9c00157bf
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/snps,designware-i2s.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DesignWare I2S controller
+
+maintainers:
+  - Jose Abreu <joabreu at synopsys.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: canaan,k210-i2s
+          - const: snps,designware-i2s
+      - enum:
+          - snps,designware-i2s
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: |
+      The interrupt line number for the I2S controller. Add this
+      parameter if the I2S controller that you are using does not
+      support DMA.
+    maxItems: 1
+
+  clocks:
+    description: Sampling rate reference clock
+
+  clock-names:
+    const: i2sclk
+
+  resets:
+    maxItems: 1
+
+  dmas:
+    items:
+      - description: TX DMA Channel
+      - description: RX DMA Channel
+    minItems: 1
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+    minItems: 1
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: canaan,k210-i2s
+
+then:
+  properties:
+    "#sound-dai-cells":
+      const: 1
+
+else:
+  properties:
+    "#sound-dai-cells":
+      const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+oneOf:
+  - required:
+      - dmas
+      - dma-names
+  - required:
+      - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    soc_i2s: i2s at 7ff90000 {
+      compatible = "snps,designware-i2s";
+      reg = <0x7ff90000 0x1000>;
+      clocks = <&scpi_i2sclk 0>;
+      clock-names = "i2sclk";
+      #sound-dai-cells = <0>;
+      dmas = <&dma0 5>;
+      dma-names = "tx";
+    };
-- 
2.36.1