[PATCH 00/14] Canaan devicetree fixes
Conor Dooley
mail at conchuod.ie
Sat Jun 18 05:30:22 PDT 2022
From: Conor Dooley <conor.dooley at microchip.com>
Hey all,
This series should rid us of dtbs_check errors for the RISC-V Canaan k210
based boards (well, unless you enable W=1 but that's another days work).
I *DO NOT* have any Canaan hardware so I have not tested any of this in
anger. I based the series on next-20220617.
For the bindings, I am never sure about which of {unevaluated,additional}
Properties is correct to use, but the if statements in the binding didn't
work with additional so I used unevaluated...
@Mark, for your two bindings I was not sure about the properties that I
made depend on the compatible, but I looked in tree and was not able to
find other users to contradict what's in the Canaan devicetrees nor did
I get that much help from their docs.
@Rob, yesterday's removal of ilitek,ili9341.txt is moved to ths series
since I was editing the dt-schema binding here anyway.
Finally, @Palmer:
This + Atul's stuff + the sifive dts watchdog patch will get us sorted
in terms of dtbs_check errors. To make keeping it that way a little
easier, I changed the Canaan devicetree Makefile so that it would build
all of the devicetrees in the directory if SOC_CANAAN. Hopefully someone
with a device can test it - but my build log *looked* fine but that's
not exactly sufficient.
Thanks,
Conor.
Conor Dooley (14):
dt-bindings: display: convert ilitek,ili9341.txt to dt-schema
dt-bindings: display: panel: allow ilitek,ili9341 in isolation
ASoC: dt-bindings: convert designware-i2s to dt-schema
dt-bindings: dma: add Canaan k210 to Synopsys DesignWare DMA
dt-bindings: timer: add Canaan k210 to Synopsys DesignWare timer
spi: dt-bindings: dw-apb-ssi: update spi-{r,t}x-bus-width for dwc-ssi
riscv: dts: canaan: fix the k210's memory node
riscv: dts: canaan: add a specific compatible for k210's dma
riscv: dts: canaan: add a specific compatible for k210's timers
riscv: dts: canaan: fix mmc node names
riscv: dts: canaan: fix kd233 display spi frequency
riscv: dts: canaan: use custom compatible for k210 i2s
riscv: dts: canaan: remove spi-max-frequency from controllers
riscv: dts: canaan: build all devicetress if SOC_CANAAN
.../bindings/display/ilitek,ili9341.txt | 27 ------
.../display/panel/ilitek,ili9341.yaml | 60 ++++++++----
.../bindings/dma/snps,dw-axi-dmac.yaml | 35 +++++--
.../bindings/sound/designware-i2s.txt | 35 -------
.../bindings/sound/snps,designware-i2s.yaml | 93 +++++++++++++++++++
.../bindings/spi/snps,dw-apb-ssi.yaml | 48 +++++++---
.../bindings/timer/snps,dw-apb-timer.yaml | 28 ++++--
arch/riscv/boot/dts/canaan/Makefile | 10 +-
arch/riscv/boot/dts/canaan/canaan_kd233.dts | 4 +-
arch/riscv/boot/dts/canaan/k210.dtsi | 25 ++---
.../riscv/boot/dts/canaan/sipeed_maix_bit.dts | 2 +-
.../boot/dts/canaan/sipeed_maix_dock.dts | 2 +-
arch/riscv/boot/dts/canaan/sipeed_maix_go.dts | 2 +-
.../boot/dts/canaan/sipeed_maixduino.dts | 2 +-
14 files changed, 239 insertions(+), 134 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/display/ilitek,ili9341.txt
delete mode 100644 Documentation/devicetree/bindings/sound/designware-i2s.txt
create mode 100644 Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml
base-commit: 07dc787be2316e243a16a33d0a9b734cd9365bd3
--
2.36.1
More information about the linux-riscv
mailing list