[PATCH v2 1/6] genirq: GENERIC_IRQ_EFFECTIVE_AFF_MASK depends on SMP

[Samuel Holland]

An IRQ's effective affinity can only be different from its configured
affinity if there are multiple CPUs. Make it clear that this option is
only meaningful when SMP is enabled. Most of the relevant code in
irqdesc.c is already hidden behind CONFIG_SMP anyway.

Signed-off-by: Samuel Holland <samuel at sholland.org>
---

(no changes since v1)

 arch/arm/mach-hisi/Kconfig |  2 +-
 drivers/irqchip/Kconfig    | 14 +++++++-------
 kernel/irq/Kconfig         |  1 +
 3 files changed, 9 insertions(+), 8 deletions(-)

diff --git a/arch/arm/mach-hisi/Kconfig b/arch/arm/mach-hisi/Kconfig
index 75cccbd3f05f..7b3440687176 100644
--- a/arch/arm/mach-hisi/Kconfig
+++ b/arch/arm/mach-hisi/Kconfig
@@ -40,7 +40,7 @@ config ARCH_HIP04
 	select HAVE_ARM_ARCH_TIMER
 	select MCPM if SMP
 	select MCPM_QUAD_CLUSTER if SMP
-	select GENERIC_IRQ_EFFECTIVE_AFF_MASK
+	select GENERIC_IRQ_EFFECTIVE_AFF_MASK if SMP
 	help
 	  Support for Hisilicon HiP04 SoC family
 
diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 4ab1038b5482..6f74c144a7cc 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -8,7 +8,7 @@ config IRQCHIP
 config ARM_GIC
 	bool
 	select IRQ_DOMAIN_HIERARCHY
-	select GENERIC_IRQ_EFFECTIVE_AFF_MASK
+	select GENERIC_IRQ_EFFECTIVE_AFF_MASK if SMP
 
 config ARM_GIC_PM
 	bool
@@ -34,7 +34,7 @@ config ARM_GIC_V3
 	bool
 	select IRQ_DOMAIN_HIERARCHY
 	select PARTITION_PERCPU
-	select GENERIC_IRQ_EFFECTIVE_AFF_MASK
+	select GENERIC_IRQ_EFFECTIVE_AFF_MASK if SMP
 
 config ARM_GIC_V3_ITS
 	bool
@@ -76,7 +76,7 @@ config ARMADA_370_XP_IRQ
 	bool
 	select GENERIC_IRQ_CHIP
 	select PCI_MSI if PCI
-	select GENERIC_IRQ_EFFECTIVE_AFF_MASK
+	select GENERIC_IRQ_EFFECTIVE_AFF_MASK if SMP
 
 config ALPINE_MSI
 	bool
@@ -112,7 +112,7 @@ config BCM6345_L1_IRQ
 	bool
 	select GENERIC_IRQ_CHIP
 	select IRQ_DOMAIN
-	select GENERIC_IRQ_EFFECTIVE_AFF_MASK
+	select GENERIC_IRQ_EFFECTIVE_AFF_MASK if SMP
 
 config BCM7038_L1_IRQ
 	tristate "Broadcom STB 7038-style L1/L2 interrupt controller driver"
@@ -120,7 +120,7 @@ config BCM7038_L1_IRQ
 	default ARCH_BRCMSTB || BMIPS_GENERIC
 	select GENERIC_IRQ_CHIP
 	select IRQ_DOMAIN
-	select GENERIC_IRQ_EFFECTIVE_AFF_MASK
+	select GENERIC_IRQ_EFFECTIVE_AFF_MASK if SMP
 
 config BCM7120_L2_IRQ
 	tristate "Broadcom STB 7120-style L2 interrupt controller driver"
@@ -179,7 +179,7 @@ config IRQ_MIPS_CPU
 	select GENERIC_IRQ_CHIP
 	select GENERIC_IRQ_IPI if SYS_SUPPORTS_MULTITHREADING
 	select IRQ_DOMAIN
-	select GENERIC_IRQ_EFFECTIVE_AFF_MASK
+	select GENERIC_IRQ_EFFECTIVE_AFF_MASK if SMP
 
 config CLPS711X_IRQCHIP
 	bool
@@ -294,7 +294,7 @@ config VERSATILE_FPGA_IRQ_NR
 config XTENSA_MX
 	bool
 	select IRQ_DOMAIN
-	select GENERIC_IRQ_EFFECTIVE_AFF_MASK
+	select GENERIC_IRQ_EFFECTIVE_AFF_MASK if SMP
 
 config XILINX_INTC
 	bool "Xilinx Interrupt Controller IP"
diff --git a/kernel/irq/Kconfig b/kernel/irq/Kconfig
index 10929eda9825..a2a8df39c2bc 100644
--- a/kernel/irq/Kconfig
+++ b/kernel/irq/Kconfig
@@ -24,6 +24,7 @@ config GENERIC_IRQ_SHOW_LEVEL
 
 # Supports effective affinity mask
 config GENERIC_IRQ_EFFECTIVE_AFF_MASK
+       depends on SMP
        bool
 
 # Support for delayed migration from interrupt context
-- 
2.35.1