[PATCH] drivers: soc: sifive: Add missing of_node_put() in sifive_l2_cache.c

[Liang He]

In sifive_l2_init(), of_find_matching_node() will return a node pointer
with refcount incremented. We should use of_node_put() in each fail path
or when it is not used anymore.

Signed-off-by: Liang He <windhl at 126.com>
---
 drivers/soc/sifive/sifive_l2_cache.c | 29 ++++++++++++++++++++++------
 1 file changed, 23 insertions(+), 6 deletions(-)

diff --git a/drivers/soc/sifive/sifive_l2_cache.c b/drivers/soc/sifive/sifive_l2_cache.c
index 59640a1d0b28..2b9c9522ef21 100644
--- a/drivers/soc/sifive/sifive_l2_cache.c
+++ b/drivers/soc/sifive/sifive_l2_cache.c
@@ -198,29 +198,41 @@ static int __init sifive_l2_init(void)
 	struct resource res;
 	int i, rc, intr_num;
 
+	int ret;
+
 	np = of_find_matching_node(NULL, sifive_l2_ids);
 	if (!np)
 		return -ENODEV;
 
 	if (of_address_to_resource(np, 0, &res))
-		return -ENODEV;
+	{
+		ret = -ENODEV;
+		goto out_put;
+	}
 
 	l2_base = ioremap(res.start, resource_size(&res));
 	if (!l2_base)
-		return -ENOMEM;
+	{
+		ret = -ENOMEM;
+		goto out_put;
+	}
 
 	intr_num = of_property_count_u32_elems(np, "interrupts");
-	if (!intr_num) {
+	if (!intr_num) {		
 		pr_err("L2CACHE: no interrupts property\n");
-		return -ENODEV;
+		ret = -ENODEV
+		goto out_put;
 	}
 
 	for (i = 0; i < intr_num; i++) {
 		g_irq[i] = irq_of_parse_and_map(np, i);
 		rc = request_irq(g_irq[i], l2_int_handler, 0, "l2_ecc", NULL);
+		
 		if (rc) {
+			
 			pr_err("L2CACHE: Could not request IRQ %d\n", g_irq[i]);
-			return rc;
+			ret = rc;
+			goto out_put;
 		}
 	}
 
@@ -232,6 +244,11 @@ static int __init sifive_l2_init(void)
 #ifdef CONFIG_DEBUG_FS
 	setup_sifive_debug();
 #endif
-	return 0;
+	ret = 0;
+	
+	
+out_put:
+	of_node_put(np);
+	return ret;
 }
 device_initcall(sifive_l2_init);
-- 
2.25.1