[PATCH 1/3] usb: musb: Add support for PolarFire SoC's musb controller
Conor.Dooley at microchip.com
Conor.Dooley at microchip.com
Sun Jun 12 15:14:28 PDT 2022
On 07/06/2022 16:18, Ben Dooks wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>
> On 07/06/2022 14:22, Conor Dooley wrote:
>> Add support for Microchips's PolarFire SoC's musb controller in host,
>> peripheral and otg mode.
>>
>> Tested-by: Valentina Fernandez <valentina.fernandezalanis at microchip.com>
>> Signed-off-by: Conor Dooley <conor.dooley at microchip.com>
>> ---
>> drivers/usb/musb/Kconfig | 13 +-
>> drivers/usb/musb/Makefile | 1 +
>> drivers/usb/musb/mpfs.c | 285 ++++++++++++++++++++++++++++++++++++++
>> 3 files changed, 298 insertions(+), 1 deletion(-)
>> create mode 100644 drivers/usb/musb/mpfs.c
>>
---8<---
>> +
>> + platform_set_drvdata(pdev, glue);
>> +
>> + memset(musb_resources, 0x00,
>> + sizeof(*musb_resources) * ARRAY_SIZE(musb_resources));
>> +
>> + musb_resources[0].name = pdev->resource[0].name;
>> + musb_resources[0].start = pdev->resource[0].start;
>> + musb_resources[0].end = pdev->resource[0].end;
>> + musb_resources[0].flags = pdev->resource[0].flags;
>> +
>> + musb_resources[1].name = pdev->resource[1].name;
>> + musb_resources[1].start = pdev->resource[1].start;
>> + musb_resources[1].end = pdev->resource[1].end;
>> + musb_resources[1].flags = pdev->resource[1].flags;
>> +
>> + musb_resources[2].name = pdev->resource[2].name;
>> + musb_resources[2].start = pdev->resource[2].start;
>> + musb_resources[2].end = pdev->resource[2].end;
>> + musb_resources[2].flags = pdev->resource[2].flags;
>
> I wonder if you could memcpy or just use compiler assignment for
> these?
>
Looks like since we wrote the driver, Rob's changed all the others
to do this more nicely:
https://git.kernel.org/torvalds/c/9879c81b6807
>> +
>> + ret = platform_device_add_resources(musb_pdev, musb_resources,
>> + ARRAY_SIZE(musb_resources));
>> + if (ret) {
>> + dev_err(dev, "failed to add resources\n");
>> + goto err_clk_disable;
>> + }
>> +
>> + ret = platform_device_add_data(musb_pdev, pdata, sizeof(*pdata));
>> + if (ret) {
>> + dev_err(dev, "failed to add platform_data\n");
>> + goto err_clk_disable;
>> + }
>> +
>> + ret = platform_device_add(musb_pdev);
>> + if (ret) {
>> + dev_err(dev, "failed to register musb device\n");
>> + goto err_clk_disable;
>> + }
>> +
>> + dev_info(&pdev->dev, "Registered MPFS MUSB driver\n");
>> + return 0;
>> +
>> +err_clk_disable:
>> + clk_disable_unprepare(clk);
>> +
>> +err_phy_release:
>> + usb_phy_generic_unregister(glue->phy);
>> + platform_device_put(musb_pdev);
>> + return ret;
>> +}
>> +
>> +static int mpfs_remove(struct platform_device *pdev)
>> +{
>> + struct mpfs_glue *glue = platform_get_drvdata(pdev);
>> +
>> + platform_device_unregister(glue->musb);
>> + usb_phy_generic_unregister(pdev);
>> +
>> + return 0;
>> +}
>> +
>> +#ifdef CONFIG_OF
>> +static const struct of_device_id mpfs_id_table[] = {
>> + { .compatible = "microchip,mpfs-musb" },
>> + { }
>> +};
>> +MODULE_DEVICE_TABLE(of, mpfs_id_table);
>> +#endif
>> +
>> +static struct platform_driver mpfs_musb_driver = {
>> + .probe = mpfs_probe,
>> + .remove = mpfs_remove,
>> + .driver = {
>> + .name = "mpfs-musb",
>> + .of_match_table = of_match_ptr(mpfs_id_table)
>> + },
>> +};
>> +
>> +module_platform_driver(mpfs_musb_driver);
>> +
>> +MODULE_DESCRIPTION("PolarFire SoC MUSB Glue Layer");
>> +MODULE_LICENSE("GPL");
>
>
> --
> Ben Dooks http://www.codethink.co.uk/
> Senior Engineer Codethink - Providing Genius
>
> https://www.codethink.co.uk/privacy.html
More information about the linux-riscv
mailing list