[PATCH v1 4/6] dt-bindings: mfd: convert da9063 to yaml

[Krzysztof Kozlowski]

On 05/06/2022 15:32, mail at conchuod.ie wrote:
> From: Conor Dooley <conor.dooley at microchip.com>
> 
> Convert the dt binding for the da9063/da9063l to yaml.
> 
> Signed-off-by: Conor Dooley <conor.dooley at microchip.com>
> ---
>  .../devicetree/bindings/mfd/da9063.txt        | 111 ----------------
>  .../devicetree/bindings/mfd/da9063.yaml       | 123 ++++++++++++++++++
>  .../devicetree/bindings/trivial-devices.yaml  |   2 -
>  3 files changed, 123 insertions(+), 113 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/mfd/da9063.txt
>  create mode 100644 Documentation/devicetree/bindings/mfd/da9063.yaml
> 
> diff --git a/Documentation/devicetree/bindings/mfd/da9063.txt b/Documentation/devicetree/bindings/mfd/da9063.txt
> deleted file mode 100644
> index 91b79a21d403..000000000000
> --- a/Documentation/devicetree/bindings/mfd/da9063.txt
> +++ /dev/null
> @@ -1,111 +0,0 @@
> -* Dialog DA9063/DA9063L Power Management Integrated Circuit (PMIC)
> -
> -DA9063 consists of a large and varied group of sub-devices (I2C Only):
> -
> -Device                   Supply Names    Description
> -------                   ------------    -----------
> -da9063-regulator        :               : LDOs & BUCKs
> -da9063-onkey            :               : On Key
> -da9063-rtc              :               : Real-Time Clock (DA9063 only)
> -da9063-watchdog         :               : Watchdog
> -
> -======
> -
> -Required properties:
> -
> -- compatible : Should be "dlg,da9063" or "dlg,da9063l"
> -- reg : Specifies the I2C slave address (this defaults to 0x58 but it can be
> -  modified to match the chip's OTP settings).
> -- interrupts : IRQ line information.
> -- interrupt-controller
> -
> -Sub-nodes:
> -
> -- regulators : This node defines the settings for the LDOs and BUCKs.
> -  The DA9063(L) regulators are bound using their names listed below:
> -
> -    bcore1    : BUCK CORE1
> -    bcore2    : BUCK CORE2
> -    bpro      : BUCK PRO
> -    bmem      : BUCK MEM
> -    bio       : BUCK IO
> -    bperi     : BUCK PERI
> -    ldo1      : LDO_1	(DA9063 only)
> -    ldo2      : LDO_2	(DA9063 only)
> -    ldo3      : LDO_3
> -    ldo4      : LDO_4	(DA9063 only)
> -    ldo5      : LDO_5	(DA9063 only)
> -    ldo6      : LDO_6	(DA9063 only)
> -    ldo7      : LDO_7
> -    ldo8      : LDO_8
> -    ldo9      : LDO_9
> -    ldo10     : LDO_10	(DA9063 only)
> -    ldo11     : LDO_11
> -
> -  The component follows the standard regulator framework and the bindings
> -  details of individual regulator device can be found in:
> -  Documentation/devicetree/bindings/regulator/regulator.txt
> -
> -- rtc : This node defines settings for the Real-Time Clock associated with
> -  the DA9063 only. The RTC is not present in DA9063L. There are currently
> -  no entries in this binding, however compatible = "dlg,da9063-rtc" should
> -  be added if a node is created.
> -
> -- onkey : This node defines the OnKey settings for controlling the key
> -  functionality of the device. The node should contain the compatible property
> -  with the value "dlg,da9063-onkey".
> -
> -  Optional onkey properties:
> -
> -  - dlg,disable-key-power : Disable power-down using a long key-press. If this
> -    entry exists the OnKey driver will remove support for the KEY_POWER key
> -    press. If this entry does not exist then by default the key-press
> -    triggered power down is enabled and the OnKey will support both KEY_POWER
> -    and KEY_SLEEP.
> -
> -- watchdog : This node defines settings for the Watchdog timer associated
> -  with the DA9063 and DA9063L. There are currently no entries in this
> -  binding, however compatible = "dlg,da9063-watchdog" should be added
> -  if a node is created.
> -
> -
> -Example:
> -
> -	pmic0: da9063 at 58 {
> -		compatible = "dlg,da9063"
> -		reg = <0x58>;
> -		interrupt-parent = <&gpio6>;
> -		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
> -		interrupt-controller;
> -
> -		rtc {
> -			compatible = "dlg,da9063-rtc";
> -		};
> -
> -		wdt {
> -			compatible = "dlg,da9063-watchdog";
> -		};
> -
> -		onkey {
> -			compatible = "dlg,da9063-onkey";
> -			dlg,disable-key-power;
> -		};
> -
> -		regulators {
> -			DA9063_BCORE1: bcore1 {
> -				regulator-name = "BCORE1";
> -				regulator-min-microvolt = <300000>;
> -				regulator-max-microvolt = <1570000>;
> -				regulator-min-microamp = <500000>;
> -				regulator-max-microamp = <2000000>;
> -				regulator-boot-on;
> -			};
> -			DA9063_LDO11: ldo11 {
> -				regulator-name = "LDO_11";
> -				regulator-min-microvolt = <900000>;
> -				regulator-max-microvolt = <3600000>;
> -				regulator-boot-on;
> -			};
> -		};
> -	};
> -
> diff --git a/Documentation/devicetree/bindings/mfd/da9063.yaml b/Documentation/devicetree/bindings/mfd/da9063.yaml
> new file mode 100644
> index 000000000000..376880061f42
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/da9063.yaml

dlg,da9063.yaml

> @@ -0,0 +1,123 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mfd/da9063.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Dialog DA9063/DA9063L Power Management Integrated Circuit (PMIC)
> +
> +maintainers:
> +  - Steve Twiss <stwiss.opensource at diasemi.com>
> +
> +description: |
> +  For device-tree bindings of other sub-modules refer to the binding documents
> +  under the respective sub-system directories.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - dlg,da9063
> +      - dlg,da9063l
> +
> +  reg:
> +    description:
> +      I2C device address.

Skip description.

> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  interrupt-controller: true
> +
> +  "#interrupt-cells":
> +    const: 2
> +
> +  watchdog:
> +    type: object
> +    $ref: ../watchdog/watchdog.yaml#

1. full reference, so /schemas/watchdog/....
2. unevaluatedProperties:false

> +    properties:
> +      compatible:
> +        const: dlg,da9063-watchdog

> +
> +  rtc:
> +    type: object
> +    $ref: ../rtc/rtc.yaml#

Ditto

> +    properties:
> +      compatible:
> +        const: dlg,da9063-rtc
> +
> +  onkey:
> +    type: object
> +    $ref: ../input/input.yaml#

Ditto

> +    properties:
> +      compatible:
> +        const: dlg,da9063-onkey
> +
> +      dlg,disable-key-power:
> +        type: boolean
> +        description: |
> +          Disable power-down using a long key-press.
> +          If this entry does not exist then by default the key-press triggered
> +          power down is enabled and the OnKey will support both KEY_POWER and
> +          KEY_SLEEP.
> +
> +  regulators:
> +    type: object
> +    patternProperties:
> +      "^(ldo[1-11]|bcore[1-2]|bpro|bmem|bio|bperi)$":
> +        $ref: ../regulator/regulator.yaml

Ditto

> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - interrupt-controller
> +
Best regards,
Krzysztof