[PATCH RFC 1/2] dt-bindings: interrupt-controller: sifive,plic: Document Renesas RZ/Five SoC

Rob Herring robh at kernel.org
Sun Jun 5 07:23:33 PDT 2022


On Tue, May 24, 2022 at 06:22:13PM +0100, Lad Prabhakar wrote:
> Document Renesas RZ/Five (R9A07G043) SoC.
> 
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj at bp.renesas.com>
> ---
>  .../sifive,plic-1.0.0.yaml                    | 38 +++++++++++++++++--
>  1 file changed, 35 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
> index 27092c6a86c4..78ff31cb63e5 100644
> --- a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
> +++ b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
> @@ -28,7 +28,10 @@ description:
>  
>    While the PLIC supports both edge-triggered and level-triggered interrupts,
>    interrupt handlers are oblivious to this distinction and therefore it is not
> -  specified in the PLIC device-tree binding.
> +  specified in the PLIC device-tree binding for SiFive PLIC (and similar PLIC's),
> +  but for the Renesas RZ/Five Soc (AX45MP AndesCore) which has NCEPLIC100 we need
> +  to specify the interrupt type as the flow for EDGE interrupts is different
> +  compared to LEVEL interrupts.
>  
>    While the RISC-V ISA doesn't specify a memory layout for the PLIC, the
>    "sifive,plic-1.0.0" device is a concrete implementation of the PLIC that
> @@ -57,6 +60,7 @@ properties:
>            - enum:
>                - allwinner,sun20i-d1-plic
>            - const: thead,c900-plic
> +      - const: renesas-r9a07g043-plic
>  
>    reg:
>      maxItems: 1
> @@ -64,8 +68,7 @@ properties:
>    '#address-cells':
>      const: 0
>  
> -  '#interrupt-cells':
> -    const: 1
> +  '#interrupt-cells': true
>  
>    interrupt-controller: true
>  
> @@ -91,6 +94,35 @@ required:
>    - interrupts-extended
>    - riscv,ndev
>  
> +if:
> +  properties:
> +    compatible:
> +      contains:
> +        const: renesas-r9a07g043-plic
> +then:
> +  properties:
> +    clocks:
> +      maxItems: 1
> +
> +    resets:
> +      maxItems: 1
> +
> +    power-domains:
> +      maxItems: 1

Did you test this? The above properties won't be allowed because of 
additionalProperties below. You need to change it to 
'unevaluatedProperties' or move these to the top level.

> +
> +    '#interrupt-cells':
> +      const: 2
> +
> +  required:
> +    - clocks
> +    - resets
> +    - power-domains
> +
> +else:
> +  properties:
> +    '#interrupt-cells':
> +      const: 1
> +
>  additionalProperties: false
>  
>  examples:
> -- 
> 2.25.1
> 
> 



More information about the linux-riscv mailing list