[PATCH v4 1/2] dt-bindings: interrupt-controller: sifive, plic: Fix number of interrupts

[Conor Dooley]

> The number of interrupts lacks an upper bound, thus assuming one,
> causing properly grouped "interrupts-extended" properties to be flagged
> as an error by "make dtbs_check".
>
> Fix this by adding the missing "maxItems", using the architectural
> maximum of 15872 interrupts.
>
> Signed-off-by: Geert Uytterhoeven <geert at linux-m68k.org>
> Acked-by: Rob Herring <robh at kernel.org>
> ---
> v4:
>   - Use architectural maximum instead of practical maximum of 9,
>
> v3:
>   - Add Acked-by,
>
> v2:
>   - Split in two patches,
>   - Improve patch description and document limit rationale.
> ---
>  .../bindings/interrupt-controller/sifive,plic-1.0.0.yaml         | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
> index 28b6b17fe4b26778..57c06126c99502fa 100644
> --- a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
> +++ b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
> @@ -62,6 +62,7 @@ properties:
>
>    interrupts-extended:
>      minItems: 1
> +    maxItems: 15872
>      description:
>        Specifies which contexts are connected to the PLIC, with "-1" specifying
>        that a context is not present. Each node pointed to should be a
> --
> 2.25.1

As with the clint - clears errors on the icicle dt, so fwiw:
Acked-by: Conor Dooley <conor.dooley at microchip.com>