[PATCH 2/4] riscv: dts: Change the macro name of prci in each device node
Zong Li
zong.li at sifive.com
Wed Jan 19 01:28:39 PST 2022
We currently change the macro name for fu540 and fu740 by adding the
prefix respectively, these marcos are referenced by some device nodes,
they should be modified as well.
Signed-off-by: Zong Li <zong.li at sifive.com>
---
arch/riscv/boot/dts/sifive/fu540-c000.dtsi | 22 +++++++++---------
arch/riscv/boot/dts/sifive/fu740-c000.dtsi | 26 +++++++++++-----------
2 files changed, 24 insertions(+), 24 deletions(-)
diff --git a/arch/riscv/boot/dts/sifive/fu540-c000.dtsi b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
index 0655b5c4201d..2bb88e06e3e2 100644
--- a/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
+++ b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
@@ -163,7 +163,7 @@ uart0: serial at 10010000 {
reg = <0x0 0x10010000 0x0 0x1000>;
interrupt-parent = <&plic0>;
interrupts = <4>;
- clocks = <&prci PRCI_CLK_TLCLK>;
+ clocks = <&prci FU540_PRCI_CLK_TLCLK>;
status = "disabled";
};
dma: dma at 3000000 {
@@ -178,7 +178,7 @@ uart1: serial at 10011000 {
reg = <0x0 0x10011000 0x0 0x1000>;
interrupt-parent = <&plic0>;
interrupts = <5>;
- clocks = <&prci PRCI_CLK_TLCLK>;
+ clocks = <&prci FU540_PRCI_CLK_TLCLK>;
status = "disabled";
};
i2c0: i2c at 10030000 {
@@ -186,7 +186,7 @@ i2c0: i2c at 10030000 {
reg = <0x0 0x10030000 0x0 0x1000>;
interrupt-parent = <&plic0>;
interrupts = <50>;
- clocks = <&prci PRCI_CLK_TLCLK>;
+ clocks = <&prci FU540_PRCI_CLK_TLCLK>;
reg-shift = <2>;
reg-io-width = <1>;
#address-cells = <1>;
@@ -199,7 +199,7 @@ qspi0: spi at 10040000 {
0x0 0x20000000 0x0 0x10000000>;
interrupt-parent = <&plic0>;
interrupts = <51>;
- clocks = <&prci PRCI_CLK_TLCLK>;
+ clocks = <&prci FU540_PRCI_CLK_TLCLK>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -210,7 +210,7 @@ qspi1: spi at 10041000 {
0x0 0x30000000 0x0 0x10000000>;
interrupt-parent = <&plic0>;
interrupts = <52>;
- clocks = <&prci PRCI_CLK_TLCLK>;
+ clocks = <&prci FU540_PRCI_CLK_TLCLK>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -220,7 +220,7 @@ qspi2: spi at 10050000 {
reg = <0x0 0x10050000 0x0 0x1000>;
interrupt-parent = <&plic0>;
interrupts = <6>;
- clocks = <&prci PRCI_CLK_TLCLK>;
+ clocks = <&prci FU540_PRCI_CLK_TLCLK>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -233,8 +233,8 @@ eth0: ethernet at 10090000 {
0x0 0x100a0000 0x0 0x1000>;
local-mac-address = [00 00 00 00 00 00];
clock-names = "pclk", "hclk";
- clocks = <&prci PRCI_CLK_GEMGXLPLL>,
- <&prci PRCI_CLK_GEMGXLPLL>;
+ clocks = <&prci FU540_PRCI_CLK_GEMGXLPLL>,
+ <&prci FU540_PRCI_CLK_GEMGXLPLL>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -244,7 +244,7 @@ pwm0: pwm at 10020000 {
reg = <0x0 0x10020000 0x0 0x1000>;
interrupt-parent = <&plic0>;
interrupts = <42 43 44 45>;
- clocks = <&prci PRCI_CLK_TLCLK>;
+ clocks = <&prci FU540_PRCI_CLK_TLCLK>;
#pwm-cells = <3>;
status = "disabled";
};
@@ -253,7 +253,7 @@ pwm1: pwm at 10021000 {
reg = <0x0 0x10021000 0x0 0x1000>;
interrupt-parent = <&plic0>;
interrupts = <46 47 48 49>;
- clocks = <&prci PRCI_CLK_TLCLK>;
+ clocks = <&prci FU540_PRCI_CLK_TLCLK>;
#pwm-cells = <3>;
status = "disabled";
};
@@ -279,7 +279,7 @@ gpio: gpio at 10060000 {
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&prci PRCI_CLK_TLCLK>;
+ clocks = <&prci FU540_PRCI_CLK_TLCLK>;
status = "disabled";
};
};
diff --git a/arch/riscv/boot/dts/sifive/fu740-c000.dtsi b/arch/riscv/boot/dts/sifive/fu740-c000.dtsi
index abbb960f90a0..38fa29db8a90 100644
--- a/arch/riscv/boot/dts/sifive/fu740-c000.dtsi
+++ b/arch/riscv/boot/dts/sifive/fu740-c000.dtsi
@@ -166,7 +166,7 @@ uart0: serial at 10010000 {
reg = <0x0 0x10010000 0x0 0x1000>;
interrupt-parent = <&plic0>;
interrupts = <39>;
- clocks = <&prci PRCI_CLK_PCLK>;
+ clocks = <&prci FU740_PRCI_CLK_PCLK>;
status = "disabled";
};
uart1: serial at 10011000 {
@@ -174,7 +174,7 @@ uart1: serial at 10011000 {
reg = <0x0 0x10011000 0x0 0x1000>;
interrupt-parent = <&plic0>;
interrupts = <40>;
- clocks = <&prci PRCI_CLK_PCLK>;
+ clocks = <&prci FU740_PRCI_CLK_PCLK>;
status = "disabled";
};
i2c0: i2c at 10030000 {
@@ -182,7 +182,7 @@ i2c0: i2c at 10030000 {
reg = <0x0 0x10030000 0x0 0x1000>;
interrupt-parent = <&plic0>;
interrupts = <52>;
- clocks = <&prci PRCI_CLK_PCLK>;
+ clocks = <&prci FU740_PRCI_CLK_PCLK>;
reg-shift = <2>;
reg-io-width = <1>;
#address-cells = <1>;
@@ -194,7 +194,7 @@ i2c1: i2c at 10031000 {
reg = <0x0 0x10031000 0x0 0x1000>;
interrupt-parent = <&plic0>;
interrupts = <53>;
- clocks = <&prci PRCI_CLK_PCLK>;
+ clocks = <&prci FU740_PRCI_CLK_PCLK>;
reg-shift = <2>;
reg-io-width = <1>;
#address-cells = <1>;
@@ -207,7 +207,7 @@ qspi0: spi at 10040000 {
<0x0 0x20000000 0x0 0x10000000>;
interrupt-parent = <&plic0>;
interrupts = <41>;
- clocks = <&prci PRCI_CLK_PCLK>;
+ clocks = <&prci FU740_PRCI_CLK_PCLK>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -218,7 +218,7 @@ qspi1: spi at 10041000 {
<0x0 0x30000000 0x0 0x10000000>;
interrupt-parent = <&plic0>;
interrupts = <42>;
- clocks = <&prci PRCI_CLK_PCLK>;
+ clocks = <&prci FU740_PRCI_CLK_PCLK>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -228,7 +228,7 @@ spi0: spi at 10050000 {
reg = <0x0 0x10050000 0x0 0x1000>;
interrupt-parent = <&plic0>;
interrupts = <43>;
- clocks = <&prci PRCI_CLK_PCLK>;
+ clocks = <&prci FU740_PRCI_CLK_PCLK>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -241,8 +241,8 @@ eth0: ethernet at 10090000 {
<0x0 0x100a0000 0x0 0x1000>;
local-mac-address = [00 00 00 00 00 00];
clock-names = "pclk", "hclk";
- clocks = <&prci PRCI_CLK_GEMGXLPLL>,
- <&prci PRCI_CLK_GEMGXLPLL>;
+ clocks = <&prci FU740_PRCI_CLK_GEMGXLPLL>,
+ <&prci FU740_PRCI_CLK_GEMGXLPLL>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -252,7 +252,7 @@ pwm0: pwm at 10020000 {
reg = <0x0 0x10020000 0x0 0x1000>;
interrupt-parent = <&plic0>;
interrupts = <44>, <45>, <46>, <47>;
- clocks = <&prci PRCI_CLK_PCLK>;
+ clocks = <&prci FU740_PRCI_CLK_PCLK>;
#pwm-cells = <3>;
status = "disabled";
};
@@ -261,7 +261,7 @@ pwm1: pwm at 10021000 {
reg = <0x0 0x10021000 0x0 0x1000>;
interrupt-parent = <&plic0>;
interrupts = <48>, <49>, <50>, <51>;
- clocks = <&prci PRCI_CLK_PCLK>;
+ clocks = <&prci FU740_PRCI_CLK_PCLK>;
#pwm-cells = <3>;
status = "disabled";
};
@@ -287,7 +287,7 @@ gpio: gpio at 10060000 {
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&prci PRCI_CLK_PCLK>;
+ clocks = <&prci FU740_PRCI_CLK_PCLK>;
status = "disabled";
};
pcie at e00000000 {
@@ -316,7 +316,7 @@ pcie at e00000000 {
<0x0 0x0 0x0 0x3 &plic0 59>,
<0x0 0x0 0x0 0x4 &plic0 60>;
clock-names = "pcie_aux";
- clocks = <&prci PRCI_CLK_PCIE_AUX>;
+ clocks = <&prci FU740_PRCI_CLK_PCIE_AUX>;
pwren-gpios = <&gpio 5 0>;
reset-gpios = <&gpio 8 0>;
resets = <&prci 4>;
--
2.31.1
More information about the linux-riscv
mailing list