[PATCH v2 3/3] dmaengine: sf-pdma: Get number of channel by device tree

Zong Li zong.li at sifive.com
Wed Jan 12 23:25:54 PST 2022


On Thu, Jan 13, 2022 at 2:53 PM Zong Li <zong.li at sifive.com> wrote:
>
> On Wed, Jan 12, 2022 at 4:28 PM Geert Uytterhoeven <geert at linux-m68k.org> wrote:
> >
> > Hi Zong,
> >
> > On Tue, Jan 11, 2022 at 9:51 AM Zong Li <zong.li at sifive.com> wrote:
> > > It currently assumes that there are always four channels, it would
> > > cause the error if there is actually less than four channels. Change
> > > that by getting number of channel from device tree.
> > >
> > > For backwards-compatible, it uses the default value (i.e. 4) when there
> > > is no 'dma-channels' information in dts.
> > >
> > > Signed-off-by: Zong Li <zong.li at sifive.com>
> >
> > Thanks for your patch!
> >
> > > --- a/drivers/dma/sf-pdma/sf-pdma.c
> > > +++ b/drivers/dma/sf-pdma/sf-pdma.c
> > > @@ -484,21 +484,24 @@ static int sf_pdma_probe(struct platform_device *pdev)
> > >         struct sf_pdma *pdma;
> > >         struct sf_pdma_chan *chan;
> > >         struct resource *res;
> > > -       int len, chans;
> > > -       int ret;
> > > +       int len, ret;
> > >         const enum dma_slave_buswidth widths =
> > >                 DMA_SLAVE_BUSWIDTH_1_BYTE | DMA_SLAVE_BUSWIDTH_2_BYTES |
> > >                 DMA_SLAVE_BUSWIDTH_4_BYTES | DMA_SLAVE_BUSWIDTH_8_BYTES |
> > >                 DMA_SLAVE_BUSWIDTH_16_BYTES | DMA_SLAVE_BUSWIDTH_32_BYTES |
> > >                 DMA_SLAVE_BUSWIDTH_64_BYTES;
> > >
> > > -       chans = PDMA_NR_CH;
> > > -       len = sizeof(*pdma) + sizeof(*chan) * chans;
> > > +       len = sizeof(*pdma) + sizeof(*chan) * PDMA_MAX_NR_CH;
> >
> > Why is the last part added (yes, this is a pre-existing issue)?
> > struct sf_pdma already contains space for chans[PDMA_MAX_NR_CH].
> > Either drop the last part, or change sf_pdma.chans[] to a flexible
> > array member.
> >
> > BTW, you can use the struct_size() or flex_array_size() helper
> > to calculate len.
>
> Thanks for your suggestions, let me fix it in the next version.
>
> >
> > >         pdma = devm_kzalloc(&pdev->dev, len, GFP_KERNEL);
> > >         if (!pdma)
> > >                 return -ENOMEM;
> > >
> > > -       pdma->n_chans = chans;
> > > +       ret = of_property_read_u32(pdev->dev.of_node, "dma-channels",
> > > +                                  &pdma->n_chans);
> > > +       if (ret) {
> > > +               dev_notice(&pdev->dev, "set number of channels to default value: 4\n");
> > > +               pdma->n_chans = PDMA_MAX_NR_CH;
> > > +       }
> > >
> > >         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > >         pdma->membase = devm_ioremap_resource(&pdev->dev, res);
> > > @@ -556,7 +559,7 @@ static int sf_pdma_remove(struct platform_device *pdev)
> > >         struct sf_pdma_chan *ch;
> > >         int i;
> > >
> > > -       for (i = 0; i < PDMA_NR_CH; i++) {
> > > +       for (i = 0; i < pdma->n_chans; i++) {
> > >                 ch = &pdma->chans[i];
> >
> > If dma-channels in DT > PDMA_NR_CH, this becomes an out-of-bound
> > access.
> >
>
> Okay, let me get the min() between pdma->chans and PDMA_MAX_NR_CH,
> please let me know if it isn't good to you.

Please allow me give more details on it, I would compare the value of
pdma->chans with PDMA_MAX_NR_CH in probe function, and set the
pdma->chans to PDMA_MAX_NR_CH if the value in DT is bigger than
PDMA_MAX_NR_CH.

>
> > >
> > >                 devm_free_irq(&pdev->dev, ch->txirq, ch);
> > > diff --git a/drivers/dma/sf-pdma/sf-pdma.h b/drivers/dma/sf-pdma/sf-pdma.h
> > > index 0c20167b097d..8127d792f639 100644
> > > --- a/drivers/dma/sf-pdma/sf-pdma.h
> > > +++ b/drivers/dma/sf-pdma/sf-pdma.h
> > > @@ -22,11 +22,7 @@
> > >  #include "../dmaengine.h"
> > >  #include "../virt-dma.h"
> > >
> > > -#define PDMA_NR_CH                                     4
> > > -
> > > -#if (PDMA_NR_CH != 4)
> > > -#error "Please define PDMA_NR_CH to 4"
> > > -#endif
> > > +#define PDMA_MAX_NR_CH                                 4
> > >
> > >  #define PDMA_BASE_ADDR                                 0x3000000
> > >  #define PDMA_CHAN_OFFSET                               0x1000
> > > @@ -118,7 +114,7 @@ struct sf_pdma {
> > >         void __iomem            *membase;
> > >         void __iomem            *mappedbase;
> > >         u32                     n_chans;
> > > -       struct sf_pdma_chan     chans[PDMA_NR_CH];
> > > +       struct sf_pdma_chan     chans[PDMA_MAX_NR_CH];
> > >  };
> > >
> > >  #endif /* _SF_PDMA_H */
> > -
> > Gr{oetje,eeting}s,
> >
> >                         Geert
> >
> > --
> > Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org
> >
> > In personal conversations with technical people, I call myself a hacker. But
> > when I'm talking to journalists I just say "programmer" or something like that.
> >                                 -- Linus Torvalds



More information about the linux-riscv mailing list