[PATCH v2 3/3] dmaengine: sf-pdma: Get number of channel by device tree
Zong Li
zong.li at sifive.com
Tue Jan 11 00:51:27 PST 2022
It currently assumes that there are always four channels, it would
cause the error if there is actually less than four channels. Change
that by getting number of channel from device tree.
For backwards-compatible, it uses the default value (i.e. 4) when there
is no 'dma-channels' information in dts.
Signed-off-by: Zong Li <zong.li at sifive.com>
---
drivers/dma/sf-pdma/sf-pdma.c | 15 +++++++++------
drivers/dma/sf-pdma/sf-pdma.h | 8 ++------
2 files changed, 11 insertions(+), 12 deletions(-)
diff --git a/drivers/dma/sf-pdma/sf-pdma.c b/drivers/dma/sf-pdma/sf-pdma.c
index f12606aeff87..5d386037bf36 100644
--- a/drivers/dma/sf-pdma/sf-pdma.c
+++ b/drivers/dma/sf-pdma/sf-pdma.c
@@ -484,21 +484,24 @@ static int sf_pdma_probe(struct platform_device *pdev)
struct sf_pdma *pdma;
struct sf_pdma_chan *chan;
struct resource *res;
- int len, chans;
- int ret;
+ int len, ret;
const enum dma_slave_buswidth widths =
DMA_SLAVE_BUSWIDTH_1_BYTE | DMA_SLAVE_BUSWIDTH_2_BYTES |
DMA_SLAVE_BUSWIDTH_4_BYTES | DMA_SLAVE_BUSWIDTH_8_BYTES |
DMA_SLAVE_BUSWIDTH_16_BYTES | DMA_SLAVE_BUSWIDTH_32_BYTES |
DMA_SLAVE_BUSWIDTH_64_BYTES;
- chans = PDMA_NR_CH;
- len = sizeof(*pdma) + sizeof(*chan) * chans;
+ len = sizeof(*pdma) + sizeof(*chan) * PDMA_MAX_NR_CH;
pdma = devm_kzalloc(&pdev->dev, len, GFP_KERNEL);
if (!pdma)
return -ENOMEM;
- pdma->n_chans = chans;
+ ret = of_property_read_u32(pdev->dev.of_node, "dma-channels",
+ &pdma->n_chans);
+ if (ret) {
+ dev_notice(&pdev->dev, "set number of channels to default value: 4\n");
+ pdma->n_chans = PDMA_MAX_NR_CH;
+ }
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
pdma->membase = devm_ioremap_resource(&pdev->dev, res);
@@ -556,7 +559,7 @@ static int sf_pdma_remove(struct platform_device *pdev)
struct sf_pdma_chan *ch;
int i;
- for (i = 0; i < PDMA_NR_CH; i++) {
+ for (i = 0; i < pdma->n_chans; i++) {
ch = &pdma->chans[i];
devm_free_irq(&pdev->dev, ch->txirq, ch);
diff --git a/drivers/dma/sf-pdma/sf-pdma.h b/drivers/dma/sf-pdma/sf-pdma.h
index 0c20167b097d..8127d792f639 100644
--- a/drivers/dma/sf-pdma/sf-pdma.h
+++ b/drivers/dma/sf-pdma/sf-pdma.h
@@ -22,11 +22,7 @@
#include "../dmaengine.h"
#include "../virt-dma.h"
-#define PDMA_NR_CH 4
-
-#if (PDMA_NR_CH != 4)
-#error "Please define PDMA_NR_CH to 4"
-#endif
+#define PDMA_MAX_NR_CH 4
#define PDMA_BASE_ADDR 0x3000000
#define PDMA_CHAN_OFFSET 0x1000
@@ -118,7 +114,7 @@ struct sf_pdma {
void __iomem *membase;
void __iomem *mappedbase;
u32 n_chans;
- struct sf_pdma_chan chans[PDMA_NR_CH];
+ struct sf_pdma_chan chans[PDMA_MAX_NR_CH];
};
#endif /* _SF_PDMA_H */
--
2.31.1
More information about the linux-riscv
mailing list