[PATCHv4 2/2] PCI: fu740: Force gen1 for initial device probe

Ben Dooks ben.dooks at codethink.co.uk
Mon Feb 28 09:45:49 PST 2022


On 23/02/2022 20:51, Bjorn Helgaas wrote:
> On Mon, Feb 21, 2022 at 09:03:47PM +0000, Ben Dooks wrote:
>> The fu740 PCIe core does not probe any devices on the SiFive Unmatched
>> board without this fix from U-Boot (or having U-Boot explicitly start
>> the PCIe via either boot-script or user command).
>>
>> The fix claims to set the link-speed to gen1 to get the probe
>> to work. As this is a copy from U-Boot, the code is assumed to be
>> correct and does fix the issue on the Unmatched. The code is at:
> 
> Maybe something like:
> 
>    Limit the link to Gen1 speed.
> 
> since "the fix claims" and "the code is assumed" is sort of
> weasel-worded.
> 
> The subject says "for initial device probe," but if you change
> PCI_EXP_LNKCAP, I assume that limits the link speed forever, even
> after a retrain?

Yes, thought I had checked this but having just gone back and booted
things again, the following is observed:

- U-Boot "pci enum" and then unpatched kernel -> link 8GT/s
- U-Boot "pci enum" and patched kernel -> link 2.5GT/s
- U-Boot no pci and patched kernel > link 2.5 GT/s

Clearly there needs to be some fix for this, either have two rounds
of soft-reset on the first probe, or if the device does probe at a
degraded link, do something about it.

I am not clear what the correct fix for this is.

1) Detect no U-Boot initialisation and force a two stage probe
2) If no devices on initial probe, go around and do #1
3) Always do a two stage reset
4) Something else.

Do any other systems see this issue?

I assume we need to go back and re-do this. At least this is a 100%
reliable repeat on the Unmatched board in our test rack.

>> https://source.denx.de/u-boot/u-boot/-/blob/master/drivers/pci/pcie_dw_sifive.c#L271
> 
> Maybe use this so the link doesn't become stale when more things are
> added to pcie_dw_sifive.c:
> 
>   https://source.denx.de/u-boot/u-boot/-/blob/master/drivers/pci/pcie_dw_sifive.c?id=v2022.01#L271

Thanks, useful to know.

>> The code has been this way since the driver was commited in:
>> https://source.denx.de/u-boot/u-boot/-/commit/416395c772018c6bf52aad36aca163115001793f
> 
> s/commited/committed/

Oops,

> 
>> Signed-off-by: Ben Dooks <ben.dooks at codethink.co.uk>
>> ---
>>   drivers/pci/controller/dwc/pcie-fu740.c | 19 +++++++++++++++++++
>>   1 file changed, 19 insertions(+)
>>
>> diff --git a/drivers/pci/controller/dwc/pcie-fu740.c b/drivers/pci/controller/dwc/pcie-fu740.c
>> index 842b7202b96e..19501ec8c487 100644
>> --- a/drivers/pci/controller/dwc/pcie-fu740.c
>> +++ b/drivers/pci/controller/dwc/pcie-fu740.c
>> @@ -177,11 +177,30 @@ static void fu740_pcie_init_phy(struct fu740_pcie *afp)
>>   	fu740_phyregwrite(1, PCIEX8MGMT_PHY_LANE3_BASE, PCIEX8MGMT_PHY_INIT_VAL, afp);
>>   }
>>   
>> +/* This is copied from u-boot. Force system to gen1 otherwise nothing probes
>> + * as found on the SiFive Unmatched board.
>> + */
> 
> s/u-boot/U-Boot/
> 
> Use usual multi-line comment style.

Ok.

> 
>> +static void fu740_pcie_force_gen1(struct dw_pcie *dw, struct fu740_pcie *afp )
>> +{
>> +	unsigned val;
> 
> u32, since that's what dw_pcie_readl_dbi() returns and
> dw_pcie_writel_dbi() expects.
> 
>> +
>> +	dw_pcie_dbi_ro_wr_en(dw);
>> +
>> +	val = dw_pcie_readl_dbi(dw, 0x70 + PCI_EXP_LNKCAP);
> 
> I assume 0x70 is the offset of the PCIe Capability.  There should be a
> #define for that.

Will fix.

>> +	pr_info("%s: link-cap was %08x\n", __func__, val);
> 
>    dev_info(pci->dev, "...");
> 
>> +	dw_pcie_writel_dbi(dw, 0x70 + PCI_EXP_LNKCAP, val | 0xf);
> 
> I don't understand this.  Per PCIe r6.0, sec 7.5.3.6, 1111b is a
> reserved encoding for the low four bits of PCI_EXP_LNKCAP.
> 
> If you want PCI_EXP_LNKCAP to advertise only 2.5 GT/s, the low four
> bits should be 0001b to indicate Supported Link Speeds Vector field
> bit 0, which is defined as 2.5 GT/s.

Yeah, this does not make sense now. I sort of assumed it was W1C
type thing (write-1-clear). I'm just wondering if this is now some
sort of undefined behaviour or they originally meant to clear out
some bits only... It does work, just shows the following from lspci;

  LnkCap: Port #0, Speed unknown, Width x8, ASPM L0s L1, Exit Latency 
L0s <4us, L1 <4us
          ClockPM- Surprise- LLActRep+ BwNot- ASPMOptComp+
  LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
   LnkSta: Speed 2.5GT/s (downgraded), Width x8 (ok)
         TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-


>> +	dw_pcie_dbi_ro_wr_dis(dw);
>> +}
>> +
>>   static int fu740_pcie_start_link(struct dw_pcie *pci)
>>   {
>>   	struct device *dev = pci->dev;
>>   	struct fu740_pcie *afp = dev_get_drvdata(dev);
>>   
>> +	/* Force PCIe gen1 otherwise Unmatched board does not probe */
>> +	fu740_pcie_force_gen1(pci, afp);
> 
> I guess the "Unmatched" board is the only thing we need to care about
> here?  Are there or will there be other boards that don't need this?
> 
>>   	/* Enable LTSSM */
>>   	writel_relaxed(0x1, afp->mgmt_base + PCIEX8MGMT_APP_LTSSM_ENABLE);
>>   	return 0;
>> -- 
>> 2.34.1
>>
> 


-- 
Ben Dooks				http://www.codethink.co.uk/
Senior Engineer				Codethink - Providing Genius

https://www.codethink.co.uk/privacy.html



More information about the linux-riscv mailing list