[PATCH v10 8/8] RISC-V: Enable RISC-V SBI CPU Idle driver for QEMU virt machine
Guo Ren
guoren at kernel.org
Tue Feb 8 02:17:37 PST 2022
On Tue, Feb 8, 2022 at 4:54 PM Anup Patel <anup at brainfault.org> wrote:
>
> On Tue, Feb 8, 2022 at 12:16 PM Guo Ren <guoren at kernel.org> wrote:
> >
> > Another question:
> >
> > Have you put "idle-states {" in qemu's DTS? or how do you test your patches?
>
> I usually do the following:
> 1) Dump QEMU virt machine DTB
> 2) Convert QEMU virt machine DTB into DTS
> 3) Add "idle-states" in QEMU virt machine DTS
> 4) Create QEMU virt machine DTB with "idle-states"
> 5) Use the new QEMU virt machine DTB for testing this series.
>
> Here's one of the DTS files which I used for testing on QEMU virt machine:
>
> /dts-v1/;
>
> / {
> #address-cells = <0x02>;
> #size-cells = <0x02>;
> compatible = "riscv-virtio";
> model = "riscv-virtio,qemu";
>
> chosen {
> linux,initrd-end = <0x8855d200>;
> linux,initrd-start = <0x88200000>;
> bootargs = "root=/dev/ram rw console=ttyS0 earlycon";
> stdout-path = "/soc/uart at 10000000";
> };
>
> memory at 80000000 {
> device_type = "memory";
> reg = <0x00 0x80000000 0x00 0x10000000>;
> };
>
> cpus {
> #address-cells = <0x01>;
> #size-cells = <0x00>;
> timebase-frequency = <0x989680>;
>
> cpu at 0 {
> phandle = <0x07>;
> device_type = "cpu";
> reg = <0x00>;
> status = "okay";
> compatible = "riscv";
> riscv,isa = "rv64imafdcsu";
> mmu-type = "riscv,sv48";
> cpu-idle-states = <&CPU_NONRET_DEF>;
>
> interrupt-controller {
> #interrupt-cells = <0x01>;
> interrupt-controller;
> compatible = "riscv,cpu-intc";
> phandle = <0x08>;
> };
> };
>
> cpu at 1 {
> phandle = <0x05>;
> device_type = "cpu";
> reg = <0x01>;
> status = "okay";
> compatible = "riscv";
> riscv,isa = "rv64imafdcsu";
> mmu-type = "riscv,sv48";
> cpu-idle-states = <&CPU_RET_DEF>;
>
> interrupt-controller {
> #interrupt-cells = <0x01>;
> interrupt-controller;
> compatible = "riscv,cpu-intc";
> phandle = <0x06>;
> };
> };
>
> cpu at 2 {
> phandle = <0x03>;
> device_type = "cpu";
> reg = <0x02>;
> status = "okay";
> compatible = "riscv";
> riscv,isa = "rv64imafdcsu";
> mmu-type = "riscv,sv48";
> cpu-idle-states = <&CPU_NONRET_DEF>;
>
> interrupt-controller {
> #interrupt-cells = <0x01>;
> interrupt-controller;
> compatible = "riscv,cpu-intc";
> phandle = <0x04>;
> };
> };
>
> cpu at 3 {
> phandle = <0x01>;
> device_type = "cpu";
> reg = <0x03>;
> status = "okay";
> compatible = "riscv";
> riscv,isa = "rv64imafdcsu";
> mmu-type = "riscv,sv48";
> cpu-idle-states = <&CPU_RET_DEF>;
>
> interrupt-controller {
> #interrupt-cells = <0x01>;
> interrupt-controller;
> compatible = "riscv,cpu-intc";
> phandle = <0x02>;
> };
> };
>
> cpu-map {
>
> cluster0 {
>
> core0 {
> cpu = <0x07>;
> };
>
> core1 {
> cpu = <0x05>;
> };
>
> core2 {
> cpu = <0x03>;
> };
>
> core3 {
> cpu = <0x01>;
> };
> };
> };
>
> idle-states {
> CPU_RET_DEF: cpu-retentive-default {
> compatible = "riscv,idle-state";
> riscv,sbi-suspend-param = <0x00000000>;
> entry-latency-us = <10>;
> exit-latency-us = <10>;
> min-residency-us = <100>;
> };
>
> CPU_NONRET_DEF: cpu-nonretentive-default {
> compatible = "riscv,idle-state";
> riscv,sbi-suspend-param = <0x80000000>;
> entry-latency-us = <100>;
> exit-latency-us = <100>;
> min-residency-us = <1000>;
> };
> };
> };
>
> soc {
> #address-cells = <0x02>;
> #size-cells = <0x02>;
> compatible = "simple-bus";
> ranges;
>
> flash at 20000000 {
> bank-width = <0x04>;
> reg = <0x00 0x20000000 0x00 0x2000000 0x00 0x22000000 0x00
> 0x2000000>;
> compatible = "cfi-flash";
> };
>
> rtc at 101000 {
> interrupts = <0x0b>;
> interrupt-parent = <0x09>;
> reg = <0x00 0x101000 0x00 0x1000>;
> compatible = "google,goldfish-rtc";
> };
>
> uart at 10000000 {
> interrupts = <0x0a>;
> interrupt-parent = <0x09>;
> clock-frequency = <0x384000>;
> reg = <0x00 0x10000000 0x00 0x100>;
> compatible = "ns16550a";
> };
>
> poweroff {
> value = <0x5555>;
> offset = <0x00>;
> regmap = <0x0a>;
> compatible = "syscon-poweroff";
> };
>
> reboot {
> value = <0x7777>;
> offset = <0x00>;
> regmap = <0x0a>;
> compatible = "syscon-reboot";
> };
>
> test at 100000 {
> phandle = <0x0a>;
> reg = <0x00 0x100000 0x00 0x1000>;
> compatible = "sifive,test1\0sifive,test0\0syscon";
> };
>
> pci at 30000000 {
> interrupt-map-mask = <0x1800 0x00 0x00 0x07>;
> interrupt-map = <0x00 0x00 0x00 0x01 0x09 0x20 0x00 0x00
> 0x00 0x02 0x09 0x21 0x00 0x00 0x00 0x03 0x09 0x22 0x00 0x00 0x00 0x04
> 0x09 0x23 0x800 0x00 0x00 0x01 0x09 0x21 0x800 0x00 0x00 0x02 0x09
> 0x22 0x800 0x00 0x00 0x03 0x09 0x23 0x800 0x00 0x00 0x04 0x09 0x20
> 0x1000 0x00 0x00 0x01 0x09 0x22 0x1000 0x00 0x00 0x02 0x09 0x23 0x1000
> 0x00 0x00 0x03 0x09 0x20 0x1000 0x00 0x00 0x04 0x09 0x21 0x1800 0x00
> 0x00 0x01 0x09 0x23 0x1800 0x00 0x00 0x02 0x09 0x20 0x1800 0x00 0x00
> 0x03 0x09 0x21 0x1800 0x00 0x00 0x04 0x09 0x22>;
> ranges = <0x1000000 0x00 0x00 0x00 0x3000000 0x00 0x10000
> 0x2000000 0x00 0x40000000 0x00 0x40000000 0x00 0x40000000>;
> reg = <0x00 0x30000000 0x00 0x10000000>;
> dma-coherent;
> bus-range = <0x00 0xff>;
> linux,pci-domain = <0x00>;
> device_type = "pci";
> compatible = "pci-host-ecam-generic";
> #size-cells = <0x02>;
> #interrupt-cells = <0x01>;
> #address-cells = <0x03>;
> };
>
> virtio_mmio at 10008000 {
> interrupts = <0x08>;
> interrupt-parent = <0x09>;
> reg = <0x00 0x10008000 0x00 0x1000>;
> compatible = "virtio,mmio";
> };
>
> virtio_mmio at 10007000 {
> interrupts = <0x07>;
> interrupt-parent = <0x09>;
> reg = <0x00 0x10007000 0x00 0x1000>;
> compatible = "virtio,mmio";
> };
>
> virtio_mmio at 10006000 {
> interrupts = <0x06>;
> interrupt-parent = <0x09>;
> reg = <0x00 0x10006000 0x00 0x1000>;
> compatible = "virtio,mmio";
> };
>
> virtio_mmio at 10005000 {
> interrupts = <0x05>;
> interrupt-parent = <0x09>;
> reg = <0x00 0x10005000 0x00 0x1000>;
> compatible = "virtio,mmio";
> };
>
> virtio_mmio at 10004000 {
> interrupts = <0x04>;
> interrupt-parent = <0x09>;
> reg = <0x00 0x10004000 0x00 0x1000>;
> compatible = "virtio,mmio";
> };
>
> virtio_mmio at 10003000 {
> interrupts = <0x03>;
> interrupt-parent = <0x09>;
> reg = <0x00 0x10003000 0x00 0x1000>;
> compatible = "virtio,mmio";
> };
>
> virtio_mmio at 10002000 {
> interrupts = <0x02>;
> interrupt-parent = <0x09>;
> reg = <0x00 0x10002000 0x00 0x1000>;
> compatible = "virtio,mmio";
> };
>
> virtio_mmio at 10001000 {
> interrupts = <0x01>;
> interrupt-parent = <0x09>;
> reg = <0x00 0x10001000 0x00 0x1000>;
> compatible = "virtio,mmio";
> };
>
> plic at c000000 {
> phandle = <0x09>;
> riscv,ndev = <0x35>;
> reg = <0x00 0xc000000 0x00 0x210000>;
> interrupts-extended = <0x08 0x0b 0x08 0x09 0x06 0x0b 0x06
> 0x09 0x04 0x0b 0x04 0x09 0x02 0x0b 0x02 0x09>;
> interrupt-controller;
> compatible = "riscv,plic0";
> #interrupt-cells = <0x01>;
> #address-cells = <0x00>;
> };
>
> clint at 2000000 {
> interrupts-extended = <0x08 0x03 0x08 0x07 0x06 0x03 0x06
> 0x07 0x04 0x03 0x04 0x07 0x02 0x03 0x02 0x07>;
> reg = <0x00 0x2000000 0x00 0x10000>;
> compatible = "riscv,clint0";
> };
> };
> };
Thx Anup, but it still couldn't work for testing suspend.
# echo mem > /sys/power/state
sh: write error: Function not implemented
Why there is no ARCH_SUSPEND_POSSIBLE in the patch series?
ref arm64's:
commit 166936bace056dfc11452d794209f39a5e9b0fb4
Author: Lorenzo Pieralisi <lorenzo.pieralisi at arm.com>
Date: Thu Nov 7 18:37:14 2013 +0000
arm64: kernel: add PM build infrastructure
This patch adds the required makefile and kconfig entries to enable PM
for arm64 systems.
The kernel relies on the cpu_{suspend}/{resume} infrastructure to
properly save the context for a CPU and put it to sleep, hence this
patch adds the config option required to enable cpu_{suspend}/{resume}
API.
In order to rely on the CPU PM implementation for saving and restoring
of CPU subsystems like GIC and PMU, the arch Kconfig must be also
augmented to select the CONFIG_CPU_PM option when SUSPEND or CPU_IDLE
kernel implementations are selected.
>
> Regards,
> Anup
--
Best Regards
Guo Ren
ML: https://lore.kernel.org/linux-csky/
More information about the linux-riscv
mailing list