[PATCH] PCI: fu740: fix finding gpios
Ben Dooks
ben.dooks at codethink.co.uk
Fri Feb 4 09:38:21 PST 2022
The calls to devm_gpiod_get_optional() have the -gpios on
the name. This means the pcie driver is not finding the
necessary reset or power gpios to allow the pcie devices
on the SiFive Unmatched boards.
Note, this was workng around 5.16 and may not have been
broken? There is still an issue if uboot has not probed
the pcie bus then there are no pcie devices shown when
Linux is started.
Signed-off-by: Ben Dooks <ben.dooks at codethink.co.uk>
---
drivers/pci/controller/dwc/pcie-fu740.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/pci/controller/dwc/pcie-fu740.c b/drivers/pci/controller/dwc/pcie-fu740.c
index 00cde9a248b5..842b7202b96e 100644
--- a/drivers/pci/controller/dwc/pcie-fu740.c
+++ b/drivers/pci/controller/dwc/pcie-fu740.c
@@ -259,11 +259,11 @@ static int fu740_pcie_probe(struct platform_device *pdev)
return PTR_ERR(afp->mgmt_base);
/* Fetch GPIOs */
- afp->reset = devm_gpiod_get_optional(dev, "reset-gpios", GPIOD_OUT_LOW);
+ afp->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
if (IS_ERR(afp->reset))
return dev_err_probe(dev, PTR_ERR(afp->reset), "unable to get reset-gpios\n");
- afp->pwren = devm_gpiod_get_optional(dev, "pwren-gpios", GPIOD_OUT_LOW);
+ afp->pwren = devm_gpiod_get_optional(dev, "pwren", GPIOD_OUT_LOW);
if (IS_ERR(afp->pwren))
return dev_err_probe(dev, PTR_ERR(afp->pwren), "unable to get pwren-gpios\n");
--
2.34.1
More information about the linux-riscv
mailing list