[PATCH v5 6/6] soc: renesas: Add L2 cache management for RZ/Five SoC

Lad, Prabhakar prabhakar.csengg at gmail.com
Thu Dec 15 03:03:31 PST 2022


Hi Geert,

On Thu, Dec 15, 2022 at 10:36 AM Geert Uytterhoeven
<geert at linux-m68k.org> wrote:
>
> Hi Prabhakar,
>
> On Mon, Dec 12, 2022 at 12:58 PM Prabhakar <prabhakar.csengg at gmail.com> wrote:
> > From: Lad Prabhakar <prabhakar.mahadev-lad.rj at bp.renesas.com>
> >
> > I/O Coherence Port (IOCP) provides an AXI interface for connecting
> > external non-caching masters, such as DMA controllers. The accesses
> > from IOCP are coherent with D-Caches and L2 Cache.
> >
> > IOCP is a specification option and is disabled on the Renesas RZ/Five
> > SoC due to this reason IP blocks using DMA will fail.
> >
> > The Andes AX45MP core has a Programmable Physical Memory Attributes (PMA)
> > block that allows dynamic adjustment of memory attributes in the runtime.
> > It contains a configurable amount of PMA entries implemented as CSR
> > registers to control the attributes of memory locations in interest.
> > Below are the memory attributes supported:
> > * Device, Non-bufferable
> > * Device, bufferable
> > * Memory, Non-cacheable, Non-bufferable
> > * Memory, Non-cacheable, Bufferable
> > * Memory, Write-back, No-allocate
> > * Memory, Write-back, Read-allocate
> > * Memory, Write-back, Write-allocate
> > * Memory, Write-back, Read and Write-allocate
> >
> > More info about PMA (section 10.3):
> > Link: http://www.andestech.com/wp-content/uploads/AX45MP-1C-Rev.-5.0.0-Datasheet.pdf
> >
> > As a workaround for SoCs with IOCP disabled CMO needs to be handled by
> > software. Firstly OpenSBI configures the memory region as
> > "Memory, Non-cacheable, Bufferable" and passes this region as a global
> > shared dma pool as a DT node. With DMA_GLOBAL_POOL enabled all DMA
> > allocations happen from this region and synchronization callbacks are
> > implemented to synchronize when doing DMA transactions.
> >
> > Example PMA region passes as a DT node from OpenSBI:
> >     reserved-memory {
> >         #address-cells = <2>;
> >         #size-cells = <2>;
> >         ranges;
> >
> >         pma_resv0 at 58000000 {
> >             compatible = "shared-dma-pool";
> >             reg = <0x0 0x58000000 0x0 0x08000000>;
> >             no-map;
> >             linux,dma-default;
> >         };
> >     };
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj at bp.renesas.com>
>
> Thanks for your patch!
>
> >  arch/riscv/include/asm/cacheflush.h       |   8 +
> >  arch/riscv/include/asm/errata_list.h      |  28 ++-
> >  drivers/soc/renesas/Kconfig               |   6 +
> >  drivers/soc/renesas/Makefile              |   2 +
> >  drivers/soc/renesas/rzfive/Kconfig        |   6 +
> >  drivers/soc/renesas/rzfive/Makefile       |   3 +
> >  drivers/soc/renesas/rzfive/ax45mp_cache.c | 256 ++++++++++++++++++++++
>
> Given this touches arch/riscv/include/asm/, I don't think the
> code belongs under drivers/soc/renesas/.
>
Ok. Do you have any suggestions on where you want me to put this code?

Cheers,
Prabhakar



More information about the linux-riscv mailing list