[PATCH] binfmt_flat: Remove shared library support
Palmer Dabbelt
palmer at dabbelt.com
Wed Apr 20 09:17:22 PDT 2022
On Wed, 20 Apr 2022 07:58:03 PDT (-0700), ebiederm at xmission.com wrote:
>
> In a recent discussion[1] it was reported that the binfmt_flat library
> support was only ever used on m68k and even on m68k has not been used
> in a very long time.
>
> The structure of binfmt_flat is different from all of the other binfmt
> implementations becasue of this shared library support and it made
> life and code review more effort when I refactored the code in fs/exec.c.
>
> Since in practice the code is dead remove the binfmt_flat shared libarary
> support and make maintenance of the code easier.
>
> [1] https://lkml.kernel.org/r/81788b56-5b15-7308-38c7-c7f2502c4e15@linux-m68k.org
> Signed-off-by: "Eric W. Biederman" <ebiederm at xmission.com>
> ---
>
> Can the binfmt_flat folks please verify that the shared library support
> really isn't used?
I don't actually know follow the RISC-V flat support, last I heard it was still
sort of just in limbo (some toolchain/userspace bugs th at needed to be sorted
out). Damien would know better, though, he's already on the thread. I'll
leave it up to him to ack this one, if you were even looking for anything from
the RISC-V folks at all (we don't have this in any defconfigs).
> Was binfmt_flat being enabled on arm and sh the mistake it looks like?
>
> arch/arm/configs/lpc18xx_defconfig | 1 -
> arch/arm/configs/mps2_defconfig | 1 -
> arch/arm/configs/stm32_defconfig | 1 -
> arch/arm/configs/vf610m4_defconfig | 1 -
> arch/sh/configs/rsk7201_defconfig | 1 -
> arch/sh/configs/rsk7203_defconfig | 1 -
> arch/sh/configs/se7206_defconfig | 1 -
> fs/Kconfig.binfmt | 6 -
> fs/binfmt_flat.c | 190 ++++++-----------------------
> 9 files changed, 40 insertions(+), 163 deletions(-)
>
> diff --git a/arch/arm/configs/lpc18xx_defconfig b/arch/arm/configs/lpc18xx_defconfig
> index be882ea0eee4..688c9849eec8 100644
> --- a/arch/arm/configs/lpc18xx_defconfig
> +++ b/arch/arm/configs/lpc18xx_defconfig
> @@ -30,7 +30,6 @@ CONFIG_ARM_APPENDED_DTB=y
> # CONFIG_BLK_DEV_BSG is not set
> CONFIG_BINFMT_FLAT=y
> CONFIG_BINFMT_ZFLAT=y
> -CONFIG_BINFMT_SHARED_FLAT=y
> # CONFIG_COREDUMP is not set
> CONFIG_NET=y
> CONFIG_PACKET=y
> diff --git a/arch/arm/configs/mps2_defconfig b/arch/arm/configs/mps2_defconfig
> index 89f4a6ff30bd..c1e98e33a348 100644
> --- a/arch/arm/configs/mps2_defconfig
> +++ b/arch/arm/configs/mps2_defconfig
> @@ -23,7 +23,6 @@ CONFIG_PREEMPT_VOLUNTARY=y
> CONFIG_ZBOOT_ROM_TEXT=0x0
> CONFIG_ZBOOT_ROM_BSS=0x0
> CONFIG_BINFMT_FLAT=y
> -CONFIG_BINFMT_SHARED_FLAT=y
> # CONFIG_COREDUMP is not set
> # CONFIG_SUSPEND is not set
> CONFIG_NET=y
> diff --git a/arch/arm/configs/stm32_defconfig b/arch/arm/configs/stm32_defconfig
> index 551db328009d..71d6bfcf4551 100644
> --- a/arch/arm/configs/stm32_defconfig
> +++ b/arch/arm/configs/stm32_defconfig
> @@ -28,7 +28,6 @@ CONFIG_ZBOOT_ROM_BSS=0x0
> CONFIG_XIP_KERNEL=y
> CONFIG_XIP_PHYS_ADDR=0x08008000
> CONFIG_BINFMT_FLAT=y
> -CONFIG_BINFMT_SHARED_FLAT=y
> # CONFIG_COREDUMP is not set
> CONFIG_DEVTMPFS=y
> CONFIG_DEVTMPFS_MOUNT=y
> diff --git a/arch/arm/configs/vf610m4_defconfig b/arch/arm/configs/vf610m4_defconfig
> index a89f035c3b01..70fdbfd83484 100644
> --- a/arch/arm/configs/vf610m4_defconfig
> +++ b/arch/arm/configs/vf610m4_defconfig
> @@ -18,7 +18,6 @@ CONFIG_XIP_KERNEL=y
> CONFIG_XIP_PHYS_ADDR=0x0f000080
> CONFIG_BINFMT_FLAT=y
> CONFIG_BINFMT_ZFLAT=y
> -CONFIG_BINFMT_SHARED_FLAT=y
> # CONFIG_SUSPEND is not set
> # CONFIG_UEVENT_HELPER is not set
> # CONFIG_STANDALONE is not set
> diff --git a/arch/sh/configs/rsk7201_defconfig b/arch/sh/configs/rsk7201_defconfig
> index e41526120be1..619c18699459 100644
> --- a/arch/sh/configs/rsk7201_defconfig
> +++ b/arch/sh/configs/rsk7201_defconfig
> @@ -25,7 +25,6 @@ CONFIG_CMDLINE_OVERWRITE=y
> CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ignore_loglevel"
> CONFIG_BINFMT_FLAT=y
> CONFIG_BINFMT_ZFLAT=y
> -CONFIG_BINFMT_SHARED_FLAT=y
> CONFIG_PM=y
> CONFIG_CPU_IDLE=y
> # CONFIG_STANDALONE is not set
> diff --git a/arch/sh/configs/rsk7203_defconfig b/arch/sh/configs/rsk7203_defconfig
> index 6af08fa1ddf8..5a54e2b883f0 100644
> --- a/arch/sh/configs/rsk7203_defconfig
> +++ b/arch/sh/configs/rsk7203_defconfig
> @@ -30,7 +30,6 @@ CONFIG_CMDLINE_OVERWRITE=y
> CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ignore_loglevel"
> CONFIG_BINFMT_FLAT=y
> CONFIG_BINFMT_ZFLAT=y
> -CONFIG_BINFMT_SHARED_FLAT=y
> CONFIG_PM=y
> CONFIG_CPU_IDLE=y
> CONFIG_NET=y
> diff --git a/arch/sh/configs/se7206_defconfig b/arch/sh/configs/se7206_defconfig
> index 601d062250d1..122216123e63 100644
> --- a/arch/sh/configs/se7206_defconfig
> +++ b/arch/sh/configs/se7206_defconfig
> @@ -40,7 +40,6 @@ CONFIG_CMDLINE_OVERWRITE=y
> CONFIG_CMDLINE="console=ttySC3,115200 ignore_loglevel earlyprintk=serial"
> CONFIG_BINFMT_FLAT=y
> CONFIG_BINFMT_ZFLAT=y
> -CONFIG_BINFMT_SHARED_FLAT=y
> CONFIG_BINFMT_MISC=y
> CONFIG_NET=y
> CONFIG_PACKET=y
> diff --git a/fs/Kconfig.binfmt b/fs/Kconfig.binfmt
> index 21c6332fa785..32dff7ba3dda 100644
> --- a/fs/Kconfig.binfmt
> +++ b/fs/Kconfig.binfmt
> @@ -142,12 +142,6 @@ config BINFMT_ZFLAT
> help
> Support FLAT format compressed binaries
>
> -config BINFMT_SHARED_FLAT
> - bool "Enable shared FLAT support"
> - depends on BINFMT_FLAT
> - help
> - Support FLAT shared libraries
> -
> config HAVE_AOUT
> def_bool n
>
> diff --git a/fs/binfmt_flat.c b/fs/binfmt_flat.c
> index 0ad2c7bbaddd..82e4412a9665 100644
> --- a/fs/binfmt_flat.c
> +++ b/fs/binfmt_flat.c
> @@ -68,11 +68,7 @@
> #define RELOC_FAILED 0xff00ff01 /* Relocation incorrect somewhere */
> #define UNLOADED_LIB 0x7ff000ff /* Placeholder for unused library */
>
> -#ifdef CONFIG_BINFMT_SHARED_FLAT
> -#define MAX_SHARED_LIBS (4)
> -#else
> -#define MAX_SHARED_LIBS (1)
> -#endif
> +#define MAX_SHARED_LIBS (1)
>
> #ifdef CONFIG_BINFMT_FLAT_NO_DATA_START_OFFSET
> #define DATA_START_OFFSET_WORDS (0)
> @@ -92,10 +88,6 @@ struct lib_info {
> } lib_list[MAX_SHARED_LIBS];
> };
>
> -#ifdef CONFIG_BINFMT_SHARED_FLAT
> -static int load_flat_shared_library(int id, struct lib_info *p);
> -#endif
> -
> static int load_flat_binary(struct linux_binprm *);
>
> static struct linux_binfmt flat_format = {
> @@ -307,51 +299,18 @@ static int decompress_exec(struct linux_binprm *bprm, loff_t fpos, char *dst,
> /****************************************************************************/
>
> static unsigned long
> -calc_reloc(unsigned long r, struct lib_info *p, int curid, int internalp)
> +calc_reloc(unsigned long r, struct lib_info *p)
> {
> unsigned long addr;
> - int id;
> unsigned long start_brk;
> unsigned long start_data;
> unsigned long text_len;
> unsigned long start_code;
>
> -#ifdef CONFIG_BINFMT_SHARED_FLAT
> - if (r == 0)
> - id = curid; /* Relocs of 0 are always self referring */
> - else {
> - id = (r >> 24) & 0xff; /* Find ID for this reloc */
> - r &= 0x00ffffff; /* Trim ID off here */
> - }
> - if (id >= MAX_SHARED_LIBS) {
> - pr_err("reference 0x%lx to shared library %d", r, id);
> - goto failed;
> - }
> - if (curid != id) {
> - if (internalp) {
> - pr_err("reloc address 0x%lx not in same module "
> - "(%d != %d)", r, curid, id);
> - goto failed;
> - } else if (!p->lib_list[id].loaded &&
> - load_flat_shared_library(id, p) < 0) {
> - pr_err("failed to load library %d", id);
> - goto failed;
> - }
> - /* Check versioning information (i.e. time stamps) */
> - if (p->lib_list[id].build_date && p->lib_list[curid].build_date &&
> - p->lib_list[curid].build_date < p->lib_list[id].build_date) {
> - pr_err("library %d is younger than %d", id, curid);
> - goto failed;
> - }
> - }
> -#else
> - id = 0;
> -#endif
> -
> - start_brk = p->lib_list[id].start_brk;
> - start_data = p->lib_list[id].start_data;
> - start_code = p->lib_list[id].start_code;
> - text_len = p->lib_list[id].text_len;
> + start_brk = p->lib_list[0].start_brk;
> + start_data = p->lib_list[0].start_data;
> + start_code = p->lib_list[0].start_code;
> + text_len = p->lib_list[0].text_len;
>
> if (r > start_brk - start_data + text_len) {
> pr_err("reloc outside program 0x%lx (0 - 0x%lx/0x%lx)",
> @@ -419,7 +378,7 @@ static void old_reloc(unsigned long rl)
> /****************************************************************************/
>
> static int load_flat_file(struct linux_binprm *bprm,
> - struct lib_info *libinfo, int id, unsigned long *extra_stack)
> + struct lib_info *libinfo, unsigned long *extra_stack)
> {
> struct flat_hdr *hdr;
> unsigned long textpos, datapos, realdatastart;
> @@ -471,14 +430,6 @@ static int load_flat_file(struct linux_binprm *bprm,
> goto err;
> }
>
> - /* Don't allow old format executables to use shared libraries */
> - if (rev == OLD_FLAT_VERSION && id != 0) {
> - pr_err("shared libraries are not available before rev 0x%lx\n",
> - FLAT_VERSION);
> - ret = -ENOEXEC;
> - goto err;
> - }
> -
> /*
> * fix up the flags for the older format, there were all kinds
> * of endian hacks, this only works for the simple cases
> @@ -529,15 +480,13 @@ static int load_flat_file(struct linux_binprm *bprm,
> }
>
> /* Flush all traces of the currently running executable */
> - if (id == 0) {
> - ret = begin_new_exec(bprm);
> - if (ret)
> - goto err;
> + ret = begin_new_exec(bprm);
> + if (ret)
> + goto err;
>
> - /* OK, This is the point of no return */
> - set_personality(PER_LINUX_32BIT);
> - setup_new_exec(bprm);
> - }
> + /* OK, This is the point of no return */
> + set_personality(PER_LINUX_32BIT);
> + setup_new_exec(bprm);
>
> /*
> * calculate the extra space we need to map in
> @@ -717,42 +666,40 @@ static int load_flat_file(struct linux_binprm *bprm,
> text_len -= sizeof(struct flat_hdr); /* the real code len */
>
> /* The main program needs a little extra setup in the task structure */
> - if (id == 0) {
> - current->mm->start_code = start_code;
> - current->mm->end_code = end_code;
> - current->mm->start_data = datapos;
> - current->mm->end_data = datapos + data_len;
> - /*
> - * set up the brk stuff, uses any slack left in data/bss/stack
> - * allocation. We put the brk after the bss (between the bss
> - * and stack) like other platforms.
> - * Userspace code relies on the stack pointer starting out at
> - * an address right at the end of a page.
> - */
> - current->mm->start_brk = datapos + data_len + bss_len;
> - current->mm->brk = (current->mm->start_brk + 3) & ~3;
> + current->mm->start_code = start_code;
> + current->mm->end_code = end_code;
> + current->mm->start_data = datapos;
> + current->mm->end_data = datapos + data_len;
> + /*
> + * set up the brk stuff, uses any slack left in data/bss/stack
> + * allocation. We put the brk after the bss (between the bss
> + * and stack) like other platforms.
> + * Userspace code relies on the stack pointer starting out at
> + * an address right at the end of a page.
> + */
> + current->mm->start_brk = datapos + data_len + bss_len;
> + current->mm->brk = (current->mm->start_brk + 3) & ~3;
> #ifndef CONFIG_MMU
> - current->mm->context.end_brk = memp + memp_size - stack_len;
> + current->mm->context.end_brk = memp + memp_size - stack_len;
> #endif
> - }
>
> if (flags & FLAT_FLAG_KTRACE) {
> pr_info("Mapping is %lx, Entry point is %x, data_start is %x\n",
> textpos, 0x00ffffff&ntohl(hdr->entry), ntohl(hdr->data_start));
> pr_info("%s %s: TEXT=%lx-%lx DATA=%lx-%lx BSS=%lx-%lx\n",
> - id ? "Lib" : "Load", bprm->filename,
> + "Load", bprm->filename,
> start_code, end_code, datapos, datapos + data_len,
> datapos + data_len, (datapos + data_len + bss_len + 3) & ~3);
> }
>
> /* Store the current module values into the global library structure */
> - libinfo->lib_list[id].start_code = start_code;
> - libinfo->lib_list[id].start_data = datapos;
> - libinfo->lib_list[id].start_brk = datapos + data_len + bss_len;
> - libinfo->lib_list[id].text_len = text_len;
> - libinfo->lib_list[id].loaded = 1;
> - libinfo->lib_list[id].entry = (0x00ffffff & ntohl(hdr->entry)) + textpos;
> - libinfo->lib_list[id].build_date = ntohl(hdr->build_date);
> + libinfo->lib_list[0].start_code = start_code;
> + libinfo->lib_list[0].start_data = datapos;
> + libinfo->lib_list[0].start_brk = datapos + data_len + bss_len;
> + libinfo->lib_list[0].text_len = text_len;
> + libinfo->lib_list[0].loaded = 1;
> + libinfo->lib_list[0].entry = (0x00ffffff & ntohl(hdr->entry)) + textpos;
> + libinfo->lib_list[0].build_date = ntohl(hdr->build_date);
>
> /*
> * We just load the allocations into some temporary memory to
> @@ -774,7 +721,7 @@ static int load_flat_file(struct linux_binprm *bprm,
> if (rp_val == 0xffffffff)
> break;
> if (rp_val) {
> - addr = calc_reloc(rp_val, libinfo, id, 0);
> + addr = calc_reloc(rp_val, libinfo);
> if (addr == RELOC_FAILED) {
> ret = -ENOEXEC;
> goto err;
> @@ -810,7 +757,7 @@ static int load_flat_file(struct linux_binprm *bprm,
> return -EFAULT;
> relval = ntohl(tmp);
> addr = flat_get_relocate_addr(relval);
> - rp = (u32 __user *)calc_reloc(addr, libinfo, id, 1);
> + rp = (u32 __user *)calc_reloc(addr, libinfo);
> if (rp == (u32 __user *)RELOC_FAILED) {
> ret = -ENOEXEC;
> goto err;
> @@ -833,7 +780,7 @@ static int load_flat_file(struct linux_binprm *bprm,
> */
> addr = ntohl((__force __be32)addr);
> }
> - addr = calc_reloc(addr, libinfo, id, 0);
> + addr = calc_reloc(addr, libinfo);
> if (addr == RELOC_FAILED) {
> ret = -ENOEXEC;
> goto err;
> @@ -861,7 +808,7 @@ static int load_flat_file(struct linux_binprm *bprm,
> /* zero the BSS, BRK and stack areas */
> if (clear_user((void __user *)(datapos + data_len), bss_len +
> (memp + memp_size - stack_len - /* end brk */
> - libinfo->lib_list[id].start_brk) + /* start brk */
> + libinfo->lib_list[0].start_brk) + /* start brk */
> stack_len))
> return -EFAULT;
>
> @@ -871,49 +818,6 @@ static int load_flat_file(struct linux_binprm *bprm,
> }
>
>
> -/****************************************************************************/
> -#ifdef CONFIG_BINFMT_SHARED_FLAT
> -
> -/*
> - * Load a shared library into memory. The library gets its own data
> - * segment (including bss) but not argv/argc/environ.
> - */
> -
> -static int load_flat_shared_library(int id, struct lib_info *libs)
> -{
> - /*
> - * This is a fake bprm struct; only the members "buf", "file" and
> - * "filename" are actually used.
> - */
> - struct linux_binprm bprm;
> - int res;
> - char buf[16];
> - loff_t pos = 0;
> -
> - memset(&bprm, 0, sizeof(bprm));
> -
> - /* Create the file name */
> - sprintf(buf, "/lib/lib%d.so", id);
> -
> - /* Open the file up */
> - bprm.filename = buf;
> - bprm.file = open_exec(bprm.filename);
> - res = PTR_ERR(bprm.file);
> - if (IS_ERR(bprm.file))
> - return res;
> -
> - res = kernel_read(bprm.file, bprm.buf, BINPRM_BUF_SIZE, &pos);
> -
> - if (res >= 0)
> - res = load_flat_file(&bprm, libs, id, NULL);
> -
> - allow_write_access(bprm.file);
> - fput(bprm.file);
> -
> - return res;
> -}
> -
> -#endif /* CONFIG_BINFMT_SHARED_FLAT */
> /****************************************************************************/
>
> /*
> @@ -946,7 +850,7 @@ static int load_flat_binary(struct linux_binprm *bprm)
> stack_len += (bprm->envc + 1) * sizeof(char *); /* the envp array */
> stack_len = ALIGN(stack_len, FLAT_STACK_ALIGN);
>
> - res = load_flat_file(bprm, &libinfo, 0, &stack_len);
> + res = load_flat_file(bprm, &libinfo, &stack_len);
> if (res < 0)
> return res;
>
> @@ -991,20 +895,6 @@ static int load_flat_binary(struct linux_binprm *bprm)
> */
> start_addr = libinfo.lib_list[0].entry;
>
> -#ifdef CONFIG_BINFMT_SHARED_FLAT
> - for (i = MAX_SHARED_LIBS-1; i > 0; i--) {
> - if (libinfo.lib_list[i].loaded) {
> - /* Push previos first to call address */
> - unsigned long __user *sp;
> - current->mm->start_stack -= sizeof(unsigned long);
> - sp = (unsigned long __user *)current->mm->start_stack;
> - if (put_user(start_addr, sp))
> - return -EFAULT;
> - start_addr = libinfo.lib_list[i].entry;
> - }
> - }
> -#endif
> -
> #ifdef FLAT_PLAT_INIT
> FLAT_PLAT_INIT(regs);
> #endif
More information about the linux-riscv
mailing list