[PATCH v3 4/9] dt-bindings: clk: mpfs document msspll dri registers

[Conor Dooley]

As there are two sections of registers that are responsible for clock
configuration on the PolarFire SoC: add the dynamic reconfiguration
interface section to the binding & describe what each of the sections
are used for.

Fixes: 2145bb687e3f ("dt-bindings: clk: microchip: Add Microchip PolarFire host binding")
Reviewed-by: Daire McNamara <daire.mcnamara at microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
Signed-off-by: Conor Dooley <conor.dooley at microchip.com>
---
 .../devicetree/bindings/clock/microchip,mpfs.yaml   | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/microchip,mpfs.yaml b/Documentation/devicetree/bindings/clock/microchip,mpfs.yaml
index 0c15afa2214c..016a4f378b9b 100644
--- a/Documentation/devicetree/bindings/clock/microchip,mpfs.yaml
+++ b/Documentation/devicetree/bindings/clock/microchip,mpfs.yaml
@@ -22,7 +22,16 @@ properties:
     const: microchip,mpfs-clkcfg
 
   reg:
-    maxItems: 1
+    items:
+      - description: |
+          clock config registers:
+          These registers contain enable, reset & divider tables for the, cpu,
+          axi, ahb and rtc/mtimer reference clocks as well as enable and reset
+          for the peripheral clocks.
+      - description: |
+          mss pll dri registers:
+          Block of registers responsible for dynamic reconfiguration of the mss
+          pll
 
   clocks:
     maxItems: 1
@@ -51,7 +60,7 @@ examples:
             #size-cells = <2>;
             clkcfg: clock-controller at 20002000 {
                 compatible = "microchip,mpfs-clkcfg";
-                reg = <0x0 0x20002000 0x0 0x1000>;
+                reg = <0x0 0x20002000 0x0 0x1000>, <0x0 0x3E001000 0x0 0x1000>;
                 clocks = <&ref>;
                 #clock-cells = <1>;
         };
-- 
2.35.1