[RFC PATCH V4 6/6] riscv: soc: Add Allwinner SoC kconfig option
Guo Ren
guoren at kernel.org
Mon Sep 13 02:20:25 PDT 2021
On Mon, Sep 13, 2021 at 4:45 PM Maxime Ripard <maxime at cerno.tech> wrote:
>
> Hi,
>
> On Sat, Sep 11, 2021 at 05:21:39PM +0800, guoren at kernel.org wrote:
> > From: Liu Shaohua <liush at allwinnertech.com>
> >
> > Add Allwinner kconfig option which selects SoC specific and common
> > drivers that is required for this SoC.
> >
> > Allwinner D1 uses custom PTE attributes to solve non-coherency SOC
> > interconnect issues for dma synchronization, so we set the default
> > value when SOC_SUNXI selected.
> >
> > Signed-off-by: Liu Shaohua <liush at allwinnertech.com>
> > Signed-off-by: Guo Ren <guoren at linux.alibaba.com>
> > Signed-off-by: Wei Fu <wefu at redhat.com>
> > Cc: Anup Patel <anup.patel at wdc.com>
> > Cc: Atish Patra <atish.patra at wdc.com>
> > Cc: Christoph Hellwig <hch at lst.de>
> > Cc: Chen-Yu Tsai <wens at csie.org>
> > Cc: Drew Fustini <drew at beagleboard.org>
> > Cc: Maxime Ripard <maxime at cerno.tech>
> > Cc: Palmer Dabbelt <palmerdabbelt at google.com>
> > Cc: Wei Wu <lazyparser at gmail.com>
> > ---
> > arch/riscv/Kconfig.socs | 15 +++++++++++++++
> > arch/riscv/configs/defconfig | 1 +
> > 2 files changed, 16 insertions(+)
> >
> > diff --git a/arch/riscv/Kconfig.socs b/arch/riscv/Kconfig.socs
> > index 30676ebb16eb..8721c000ef23 100644
> > --- a/arch/riscv/Kconfig.socs
> > +++ b/arch/riscv/Kconfig.socs
> > @@ -70,4 +70,19 @@ config SOC_CANAAN_K210_DTB_SOURCE
> >
> > endif
> >
> > +config SOC_SUNXI
> > + bool "Allwinner SoCs"
> > + depends on MMU
> > + select DWMAC_GENERIC
> > + select ERRATA_THEAD
> > + select RISCV_DMA_NONCOHERENT
> > + select RISCV_ERRATA_ALTERNATIVE
> > + select SERIAL_8250
> > + select SERIAL_8250_CONSOLE
> > + select SERIAL_8250_DW
> > + select SIFIVE_PLIC
> > + select STMMAC_ETH
> > + help
> > + This enables support for Allwinner SoC platforms like the D1.
> > +
>
> I'm not sure we should select the drivers there. We could very well
> imagine a board without UART, or even more so without ethernet.
We just want people could bring D1 up easier, 8250 is the basic component.
>
> These options should be in the defconfig.
>
> Maxime
--
Best Regards
Guo Ren
ML: https://lore.kernel.org/linux-csky/
More information about the linux-riscv
mailing list