[PATCH v2] riscv: dts: microchip: mpfs-icicle: Fix serial console

[Palmer Dabbelt]

On Thu, 26 Aug 2021 06:19:39 PDT (-0700), geert at linux-m68k.org wrote:
> Currently, nothing is output on the serial console, unless
> "console=ttyS0,115200n8" or "earlycon" are appended to the kernel
> command line.  Enable automatic console selection using
> chosen/stdout-path by adding a proper alias, and configure the expected
> serial rate.
>
> While at it, add aliases for the other three serial ports, which are
> provided on the same micro-USB connector as the first one.
>
> Fixes: 0fa6107eca4186ad ("RISC-V: Initial DTS for Microchip ICICLE board")
> Signed-off-by: Geert Uytterhoeven <geert at linux-m68k.org>
> Reviewed-by: Bin Meng <bmeng.cn at gmail.com>
> ---
> v2:
>   - Add Reviewed-by,
>   - Rebase on top of 417166ddec020c4e ("riscv: dts: microchip: Add
>     ethernet0 to the aliases node"), as requested by Bin.
> ---
>  arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts | 6 +++++-
>  1 file changed, 5 insertions(+), 1 deletion(-)
>
> diff --git a/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts b/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts
> index baea7d204639a185..b254c60589a1cc8b 100644
> --- a/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts
> +++ b/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts
> @@ -16,10 +16,14 @@ / {
>
>  	aliases {
>  		ethernet0 = &emac1;
> +		serial0 = &serial0;
> +		serial1 = &serial1;
> +		serial2 = &serial2;
> +		serial3 = &serial3;
>  	};
>
>  	chosen {
> -		stdout-path = &serial0;
> +		stdout-path = "serial0:115200n8";
>  	};
>
>  	cpus {

Thanks, this is on for-next (there's no fixes right now, it's still 5.15 
for me).