[RFC PATCH v3 05/11] dt-bindings: interrupt-controller: Add ACLINT MSWI and SSWI bindings

Anup Patel anup at brainfault.org
Wed Sep 1 04:56:16 PDT 2021


On Wed, Sep 1, 2021 at 6:54 AM Rob Herring <robh at kernel.org> wrote:
>
> On Mon, Aug 30, 2021 at 09:47:23AM +0530, Anup Patel wrote:
> > We add DT bindings documentation for the ACLINT MSWI and SSWI
> > devices found on RISC-V SOCs.
> >
> > Signed-off-by: Anup Patel <anup.patel at wdc.com>
> > Reviewed-by: Bin Meng <bmeng.cn at gmail.com>
> > ---
> >  .../riscv,aclint-swi.yaml                     | 95 +++++++++++++++++++
> >  1 file changed, 95 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/interrupt-controller/riscv,aclint-swi.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/interrupt-controller/riscv,aclint-swi.yaml b/Documentation/devicetree/bindings/interrupt-controller/riscv,aclint-swi.yaml
> > new file mode 100644
> > index 000000000000..68563259ae24
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/interrupt-controller/riscv,aclint-swi.yaml
> > @@ -0,0 +1,95 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/interrupt-controller/riscv,aclint-swi.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: RISC-V ACLINT Software Interrupt Devices
> > +
> > +maintainers:
> > +  - Anup Patel <anup.patel at wdc.com>
> > +
> > +description:
> > +  RISC-V SOCs include an implementation of the M-level software interrupt
> > +  (MSWI) device and the S-level software interrupt (SSWI) device defined
> > +  in the RISC-V Advanced Core Local Interruptor (ACLINT) specification.
> > +
> > +  The ACLINT MSWI and SSWI devices are documented in the RISC-V ACLINT
> > +  specification located at
> > +  https://github.com/riscv/riscv-aclint/blob/main/riscv-aclint.adoc.
> > +
> > +  The ACLINT MSWI and SSWI devices directly connect to the M-level and
> > +  S-level software interrupt lines of various HARTs (or CPUs) respectively
> > +  so the RISC-V per-HART (or per-CPU) local interrupt controller is the
> > +  parent interrupt controller for the ACLINT MSWI and SSWI devices.
> > +
> > +allOf:
> > +  - $ref: /schemas/interrupt-controller.yaml#
> > +
> > +properties:
> > +  compatible:
> > +    oneOf:
> > +      - items:
> > +        - enum:
> > +          - riscv,aclint-mswi
> > +
> > +      - items:
> > +        - enum:
> > +          - riscv,aclint-sswi
>
> All this can be just:
>
> enum:
>   - riscv,aclint-mswi
>   - riscv,aclint-sswi
>
> However...
>
> > +
> > +    description:
> > +      For ACLINT MSWI devices, it should be "riscv,aclint-mswi" OR
> > +      "<vendor>,<chip>-aclint-mswi".
> > +      For ACLINT SSWI devices, it should be "riscv,aclint-sswi" OR
> > +      "<vendor>,<chip>-aclint-sswi".
>
> s/OR/AND/
>
> There must be a compatible for the implementation. Unless RiscV
> implementations of specs are complete describing all clocks, power
> domains, resets, etc. and are quirk free.
>
> But don't write free form constraints...

It is possible that quite a few implementations (QEMU, FPGAs, and
other simulators) will not require implementation specific compatible
strings. Should we still mandate implementation specific compatible
strings in DTS for such cases?

I was not sure so I used "OR".

Regards,
Anup

>
>
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  "#interrupt-cells":
> > +    const: 0
> > +
> > +  interrupts-extended:
> > +    minItems: 1
> > +    maxItems: 4095
> > +
> > +  interrupt-controller: true
> > +
> > +additionalProperties: false
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - interrupts-extended
> > +  - interrupt-controller
> > +  - "#interrupt-cells"
> > +
> > +examples:
> > +  - |
> > +    // Example 1 (RISC-V MSWI device used by Linux RISC-V NoMMU kernel):
> > +
> > +    interrupt-controller at 2000000 {
> > +      compatible = "riscv,aclint-mswi";
> > +      interrupts-extended = <&cpu1intc 3>,
> > +                            <&cpu2intc 3>,
> > +                            <&cpu3intc 3>,
> > +                            <&cpu4intc 3>;
> > +      reg = <0x2000000 0x4000>;
> > +      interrupt-controller;
> > +      #interrupt-cells = <0>;
> > +    };
> > +
> > +  - |
> > +    // Example 2 (RISC-V SSWI device used by Linux RISC-V MMU kernel):
> > +
> > +    interrupt-controller at 2100000 {
> > +      compatible = "riscv,aclint-sswi";
> > +      interrupts-extended = <&cpu1intc 1>,
> > +                            <&cpu2intc 1>,
> > +                            <&cpu3intc 1>,
> > +                            <&cpu4intc 1>;
> > +      reg = <0x2100000 0x4000>;
> > +      interrupt-controller;
> > +      #interrupt-cells = <0>;
> > +    };
> > +...
> > --
> > 2.25.1
> >
> >



More information about the linux-riscv mailing list