[PATCH v2 28/43] KVM: VMX: Remove vCPU from PI wakeup list before updating PID.NV
Maxim Levitsky
mlevitsk at redhat.com
Sun Oct 31 15:52:55 PDT 2021
On Thu, 2021-10-28 at 17:19 +0000, Sean Christopherson wrote:
> On Thu, Oct 28, 2021, Maxim Levitsky wrote:
> > On Fri, 2021-10-08 at 19:12 -0700, Sean Christopherson wrote:
> > > Remove the vCPU from the wakeup list before updating the notification
> > > vector in the posted interrupt post-block helper. There is no need to
> > > wake the current vCPU as it is by definition not blocking. Practically
> > > speaking this is a nop as it only shaves a few meager cycles in the
> > > unlikely case that the vCPU was migrated and the previous pCPU gets a
> > > wakeup IRQ right before PID.NV is updated. The real motivation is to
> > > allow for more readable code in the future, when post-block is merged
> > > with vmx_vcpu_pi_load(), at which point removal from the list will be
> > > conditional on the old notification vector.
> > >
> > > Opportunistically add comments to document why KVM has a per-CPU spinlock
> > > that, at first glance, appears to be taken only on the owning CPU.
> > > Explicitly call out that the spinlock must be taken with IRQs disabled, a
> > > detail that was "lost" when KVM switched from spin_lock_irqsave() to
> > > spin_lock(), with IRQs disabled for the entirety of the relevant path.
> > >
> > > Signed-off-by: Sean Christopherson <seanjc at google.com>
> > > ---
> > > arch/x86/kvm/vmx/posted_intr.c | 49 +++++++++++++++++++++++-----------
> > > 1 file changed, 33 insertions(+), 16 deletions(-)
> > >
> > > diff --git a/arch/x86/kvm/vmx/posted_intr.c b/arch/x86/kvm/vmx/posted_intr.c
> > > index 2b2206339174..901b7a5f7777 100644
> > > --- a/arch/x86/kvm/vmx/posted_intr.c
> > > +++ b/arch/x86/kvm/vmx/posted_intr.c
> > > @@ -10,10 +10,22 @@
> > > #include "vmx.h"
> > >
> > > /*
> > > - * We maintain a per-CPU linked-list of vCPU, so in wakeup_handler() we
> > > - * can find which vCPU should be waken up.
> > > + * Maintain a per-CPU list of vCPUs that need to be awakened by wakeup_handler()
> > Nit: While at it, it would be nice to rename this to pi_wakeup_hanlder() so
> > that it can be more easilly found.
>
> Ah, good catch.
>
> > > + * when a WAKEUP_VECTOR interrupted is posted. vCPUs are added to the list when
> > > + * the vCPU is scheduled out and is blocking (e.g. in HLT) with IRQs enabled.
> > s/interrupted/interrupt ?
> >
> > Isn't that comment incorrect? As I see, the PI hardware is setup to use the WAKEUP_VECTOR
> > when vcpu blocks (in pi_pre_block) and then that vcpu is added to the list.
> > The pi_wakeup_hanlder just goes over the list and wakes up all vcpus on the lsit.
>
> Doh, yes. This patch is predicting the future. The comment becomes correct as of
>
> KVM: VMX: Handle PI wakeup shenanigans during vcpu_put/load
>
> but as of this patch the "scheduled out" piece doesn't hold true.
>
> > > + * The vCPUs posted interrupt descriptor is updated at the same time to set its
> > > + * notification vector to WAKEUP_VECTOR, so that posted interrupt from devices
> > > + * wake the target vCPUs. vCPUs are removed from the list and the notification
> > > + * vector is reset when the vCPU is scheduled in.
> > > */
> > > static DEFINE_PER_CPU(struct list_head, blocked_vcpu_on_cpu);
> > Also while at it, why not to rename this to 'blocked_vcpu_list'?
> > to explain that this is list of blocked vcpus. Its a per-cpu variable
> > so 'on_cpu' suffix isn't needed IMHO.
>
> As you noted, addressed in a future patch.
>
> > > +/*
> > > + * Protect the per-CPU list with a per-CPU spinlock to handle task migration.
> > > + * When a blocking vCPU is awakened _and_ migrated to a different pCPU, the
> > > + * ->sched_in() path will need to take the vCPU off the list of the _previous_
> > > + * CPU. IRQs must be disabled when taking this lock, otherwise deadlock will
> > > + * occur if a wakeup IRQ arrives and attempts to acquire the lock.
> > > + */
> > > static DEFINE_PER_CPU(spinlock_t, blocked_vcpu_on_cpu_lock);
> > >
> > > static inline struct pi_desc *vcpu_to_pi_desc(struct kvm_vcpu *vcpu)
> > > @@ -101,23 +113,28 @@ static void __pi_post_block(struct kvm_vcpu *vcpu)
> > > WARN(pi_desc->nv != POSTED_INTR_WAKEUP_VECTOR,
> > > "Wakeup handler not enabled while the vCPU was blocking");
> > >
> > > - dest = cpu_physical_id(vcpu->cpu);
> > > - if (!x2apic_mode)
> > > - dest = (dest << 8) & 0xFF00;
> > > -
> > > - do {
> > > - old.control = new.control = READ_ONCE(pi_desc->control);
> > > -
> > > - new.ndst = dest;
> > > -
> > > - /* set 'NV' to 'notification vector' */
> > > - new.nv = POSTED_INTR_VECTOR;
> > > - } while (cmpxchg64(&pi_desc->control, old.control,
> > > - new.control) != old.control);
> > > -
> > > + /*
> > > + * Remove the vCPU from the wakeup list of the _previous_ pCPU, which
> > > + * will not be the same as the current pCPU if the task was migrated.
> > > + */
> > > spin_lock(&per_cpu(blocked_vcpu_on_cpu_lock, vcpu->pre_pcpu));
> > > list_del(&vcpu->blocked_vcpu_list);
> > > spin_unlock(&per_cpu(blocked_vcpu_on_cpu_lock, vcpu->pre_pcpu));
> > > +
> > > + dest = cpu_physical_id(vcpu->cpu);
> > > + if (!x2apic_mode)
> > > + dest = (dest << 8) & 0xFF00;
> > It would be nice to have a function for this, this appears in this file twice.
> > Maybe there is a function already somewhere?
>
> The second instance does go away by the aforementioned:
Then no need for a helper.
>
> KVM: VMX: Handle PI wakeup shenanigans during vcpu_put/load
>
> I'm inclined to say we don't want a helper because there should only ever be one
> path that changes PI.ndst. But a comment would definitely help to explain the
> difference between xAPIC and x2APIC IDs.
>
Makes sense!
Best regards,
Maxim Levitsky
More information about the linux-riscv
mailing list